{"id":24571,"date":"2026-11-17T14:49:09","date_gmt":"2026-11-17T06:49:09","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html"},"modified":"2026-11-17T14:49:09","modified_gmt":"2026-11-17T06:49:09","slug":"check-cpu-and-memory-utilization-cisco-router","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html","title":{"rendered":"How to Check CPU and Memory Utilization in Cisco Router"},"content":{"rendered":"<p>Sustained high resource utilization on a Cisco router degrades forwarding performance, increases packet transit latency, and can destabilize control plane protocols such as BGP, OSPF, and LDP. When control plane queues fill up, keepalive packets drop, leading to peer timeouts and network flaps. Routinely checking and establishing baselines for CPU and RAM consumption enables network engineers to distinguish between expected traffic-driven surges and critical system anomalies like routing storms, broadcast storms, or memory leaks.<\/p>\n<p>This guide provides practical commands, interpretation models, troubleshooting workflows, automation scripts, and reference tooling to manage CPU and memory utilization across Cisco IOS and IOS-XE platforms.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Primary_Cisco_IOS_and_IOS-XE_Commands_for_CPU_and_Memory\" title=\"Primary Cisco IOS and IOS-XE Commands for CPU and Memory\">Primary Cisco IOS and IOS-XE Commands for CPU and Memory<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#1_Checking_CPU_Utilization\" title=\"1. Checking CPU Utilization\">1. Checking CPU Utilization<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#2_Checking_Memory_Allocation\" title=\"2. Checking Memory Allocation\">2. Checking Memory Allocation<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#3_IOS-XE_Hardware_Platform_Checks\" title=\"3. IOS-XE Hardware Platform Checks\">3. IOS-XE Hardware Platform Checks<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#How_to_Interpret_Cisco_Router_Show_Output_and_Establish_Baselines\" title=\"How to Interpret Cisco Router Show Output and Establish Baselines\">How to Interpret Cisco Router Show Output and Establish Baselines<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Dissecting_show_processes_cpu\" title=\"Dissecting show processes cpu\">Dissecting show processes cpu<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Dissecting_show_memory_statistics\" title=\"Dissecting show memory statistics\">Dissecting show memory statistics<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Normal_Operational_Baselines\" title=\"Normal Operational Baselines\">Normal Operational Baselines<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Troubleshooting_High_CPU_and_Memory_Exhaustion\" title=\"Troubleshooting High CPU and Memory Exhaustion\">Troubleshooting High CPU and Memory Exhaustion<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Step_1_Diagnose_High_CPU_Caused_by_High_Interrupts\" title=\"Step 1: Diagnose High CPU Caused by High Interrupts\">Step 1: Diagnose High CPU Caused by High Interrupts<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Step_2_Diagnose_High_CPU_Caused_by_High_Process_Usage\" title=\"Step 2: Diagnose High CPU Caused by High Process Usage\">Step 2: Diagnose High CPU Caused by High Process Usage<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Step_3_Diagnose_Memory_Leaks_and_Buffer_Depletion\" title=\"Step 3: Diagnose Memory Leaks and Buffer Depletion\">Step 3: Diagnose Memory Leaks and Buffer Depletion<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Step_4_Remediation_Strategies\" title=\"Step 4: Remediation Strategies\">Step 4: Remediation Strategies<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Automating_Resource_Monitoring_with_Python_and_Cisco_EEM\" title=\"Automating Resource Monitoring with Python and Cisco EEM\">Automating Resource Monitoring with Python and Cisco EEM<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#1_Python_Netmiko_Automation_Script\" title=\"1. Python (Netmiko) Automation Script\">1. Python (Netmiko) Automation Script<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#2_Cisco_Embedded_Event_Manager_EEM_On-Box_Applet\" title=\"2. Cisco Embedded Event Manager (EEM) On-Box Applet\">2. Cisco Embedded Event Manager (EEM) On-Box Applet<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Enterprise_Monitoring_Tools_for_Continuous_Tracking\" title=\"Enterprise Monitoring Tools for Continuous Tracking\">Enterprise Monitoring Tools for Continuous Tracking<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Official_Cisco_Documentation_and_Reference_Guides\" title=\"Official Cisco Documentation and Reference Guides\">Official Cisco Documentation and Reference Guides<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Core_TAC_Troubleshooting_Notes\" title=\"Core TAC Troubleshooting Notes\">Core TAC Troubleshooting Notes<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Key_Cisco_Architecture_Concepts\" title=\"Key Cisco Architecture Concepts\">Key Cisco Architecture Concepts<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\/#Standard_MIB_References_for_System_Resources\" title=\"Standard MIB References for System Resources\">Standard MIB References for System Resources<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Primary_Cisco_IOS_and_IOS-XE_Commands_for_CPU_and_Memory\"><\/span>Primary Cisco IOS and IOS-XE Commands for CPU and Memory<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Cisco routers provide several granular EXEC-level commands to inspect resource allocation in real time and over rolling time windows.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"1_Checking_CPU_Utilization\"><\/span>1. Checking CPU Utilization<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To evaluate general processor load and inspect individual tasks, use the following commands in enable mode:<\/p>\n<ul>\n<li><strong><code>show processes cpu<\/code><\/strong><br \/>\n    Displays overall CPU utilization for the past five seconds, one minute, and five minutes, followed by an unsorted tabular list of every active system process.<\/li>\n<li><strong><code>show processes cpu sorted<\/code><\/strong><br \/>\n    Appends sorting parameters to filter the process table. Use <code>show processes cpu sorted 5min<\/code> or <code>show processes cpu sorted 1min<\/code> to immediately place the highest resource-consuming processes at the top of the terminal output.<\/li>\n<li><strong><code>show processes cpu history<\/code><\/strong><br \/>\n    Renders an ASCII-based bar chart of CPU consumption across three distinct periods: the past 60 seconds (measured second-by-second), the past 60 minutes (measured minute-by-minute), and the past 72 hours (measured hour-by-hour). This assists in pinpointing when a spike originated without external monitoring software.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"2_Checking_Memory_Allocation\"><\/span>2. Checking Memory Allocation<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>RAM on Cisco routers is segmented into different pools, primarily Processor memory (used for routing engines, process states, and operating system overhead) and I\/O memory (used for interface packet buffering).<\/p>\n<ul>\n<li><strong><code>show memory statistics<\/code><\/strong><br \/>\n    Provides a high-level summary of total, used, and available RAM across all hardware memory pools.<\/li>\n<li><strong><code>show processes memory sorted<\/code><\/strong><br \/>\n    Lists all active processes ordered by the amount of RAM currently allocated, detailing allocated bytes, freed bytes, and current holding bytes per process.<\/li>\n<li><strong><code>show memory allocating-process totals<\/code><\/strong><br \/>\n    Aggregates memory allocation by the calling subsystem, making it easier to spot subsystem-level leaks.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"3_IOS-XE_Hardware_Platform_Checks\"><\/span>3. IOS-XE Hardware Platform Checks<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>On modular and modern fixed-configuration routers running Cisco IOS-XE (such as the ASR 1000, ISR 4000, and Catalyst 8000 series), processor architecture is split between the Control Plane (Route Processor) and the Data Plane (QuantumFlow Processor or QFP).<\/p>\n<ul>\n<li><strong><code>show platform resources<\/code><\/strong><br \/>\n    Provides an immediate overview of chassis-wide resource consumption, highlighting CPU, memory, and crypto hardware states across all control and service modules.<\/li>\n<li><strong><code>show platform hardware qfp active datapath utilization<\/code><\/strong><br \/>\n    Displays packet-processing utilization specifically for the QFP data engine, distinguishing traffic processing load from control plane overhead.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Interpret_Cisco_Router_Show_Output_and_Establish_Baselines\"><\/span>How to Interpret Cisco Router Show Output and Establish Baselines<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Running diagnostic commands is only the first step; interpreting the output correctly prevents false alarms and identifies critical system degradation early.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Dissecting_show_processes_cpu\"><\/span>Dissecting <code>show processes cpu<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When executing <code>show processes cpu<\/code>, the summary header provides essential telemetry:<\/p>\n<pre><code class=\"language-text\">Router# show processes cpu\nCPU utilization for five seconds: 98%\/12%; one minute: 82%; five minutes: 75%\n PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process \n   1           0         4          0  0.00%  0.00%  0.00%   0 Chunk Manager    \n  84     1284920    284910       4509 84.12% 70.40% 62.15%   0 IP Input\n<\/code><\/pre>\n<ol>\n<li><strong>Total vs. Interrupt Load:<\/strong><br \/>\n    In <code>98%\/12%<\/code>, the first value (<code>98%<\/code>) is total CPU utilization during the last five seconds. The second value (<code>12%<\/code>) represents CPU cycles spent handling hardware interrupts.<\/li>\n<li><strong>Process-Level Load:<\/strong><br \/>\n    Subtracting the interrupt percentage from the total yields the process-level load (<code>98% - 12% = 86%<\/code>). <\/p>\n<ul>\n<li><strong>High Interrupt Percentage:<\/strong> Indicates that the router is servicing high rates of packets switched via software (process switching) instead of hardware (Cisco Express Forwarding), broadcast storms, or excessive packet punts.<\/li>\n<li><strong>High Process Percentage:<\/strong> Indicates internal software routines\u2014such as BGP recalculation, OSPF Dijkstra computations, active SSH\/SNMP management connections, or executive background jobs\u2014are consuming the processor.<\/li>\n<\/ul>\n<\/li>\n<li><strong>Five-Second vs. Five-Minute Trends:<\/strong><br \/>\n    A high five-second figure paired with low one-minute and five-minute averages points to a brief, harmless burst. Sustained values across all three figures confirm ongoing congestion.<\/li>\n<\/ol>\n<h3><span class=\"ez-toc-section\" id=\"Dissecting_show_memory_statistics\"><\/span>Dissecting <code>show memory statistics<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">Router# show memory statistics\n                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)\nProcessor   21AB4000   268435456   184549376    83886080    12451840    64201824\n      I\/O    E000000    33554432    12845056    20709376    18450200    19842112\n<\/code><\/pre>\n<ul>\n<li><strong>Total, Used, Free:<\/strong> Identifies raw capacity and remaining buffers across pools.<\/li>\n<li><strong>Lowest:<\/strong> The historic minimum amount of free memory available since the last router reboot (the water-mark low). If this number approaches zero, the router came close to an out-of-memory crash.<\/li>\n<li><strong>Largest:<\/strong> The largest single contiguous block of free memory available. If <strong>Free(b)<\/strong> indicates ample remaining memory (e.g., 80 MB) but <strong>Largest(b)<\/strong> is small (e.g., 200 KB), the router&#8217;s memory is fragmented, preventing large buffers from allocating.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Normal_Operational_Baselines\"><\/span>Normal Operational Baselines<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>CPU Utilization:<\/strong> Typical steady-state load on an edge or core router ranges between <strong>10% and 45%<\/strong>. Brief spikes up to <strong>90%<\/strong> during full routing table convergence (e.g., pulling a dual BGP feed) are normal. Sustained utilization above <strong>75%<\/strong> warrants investigation.<\/li>\n<li><strong>Interrupt Levels:<\/strong> Interrupt load under standard conditions should remain below <strong>10%<\/strong>. Any value consistently above <strong>20%<\/strong> indicates a data plane routing inefficiency.<\/li>\n<li><strong>Memory Health:<\/strong> Healthy systems maintain flat or steady memory usage after convergence. Free memory should not trend downward continuously over weeks or months.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_High_CPU_and_Memory_Exhaustion\"><\/span>Troubleshooting High CPU and Memory Exhaustion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When utilization exceeds operational baselines, follow this sequential diagnostic workflow to locate the source of exhaustion.<\/p>\n<pre><code>                    [High Resource Utilization Alert]\n                                    |\n                    Is the bottleneck CPU or Memory?\n                                    |\n        +---------------------------+---------------------------+\n        |                                                       |\n   [High CPU]                                             [High Memory]\n        |                                                       |\nCheck Interrupt % in                                  Run 'show memory statistics'\n'show processes cpu'                                  Check Lowest and Largest fields\n        |                                                       |\n  +-----+-----+                                        Run 'show processes memory sorted'\n  |           |                                                 |\n[&gt; 20%]    [&lt; 10%]                                    Does one process hold\nInterrupt   Process                                   excessive\/growing bytes?\n  Level      Level                                              |\n    |          |                                       +--------+--------+\n    |    Run 'show processes                           |                 |\n    |    cpu sorted 5min'                            [Yes]              [No]\n    |          |                                       |                 |\n    |    Identify top PID                      Possible Memory    Buffer Pool Depletion\n    |    (BGP, OSPF, SNMP, etc.)                     Leak         Inspect 'show buffers'\n    |          |                                       |                 |\n    |    Check table stability                 Collect TAC trace  Tune pool sizes or\n    |    or poll rates                         Schedule bug fix   remediate drop bursts\n    |\nInvestigate Data Plane:\n1. Verify CEF ('show ip cef')\n2. Inspect punt counters ('show platform software punt statistics')\n3. Check for ACL log triggers and broadcast loops\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Diagnose_High_CPU_Caused_by_High_Interrupts\"><\/span>Step 1: Diagnose High CPU Caused by High Interrupts<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If interrupt usage dominates the 5-second CPU header, software is handling transit packets:<\/p>\n<ol>\n<li><strong>Verify Cisco Express Forwarding (CEF):<\/strong> Run <code>show ip cef<\/code>. If CEF is disabled or misconfigured on an interface (<code>no ip route-cache<\/code>), transit packets fall back to process switching via the central processor.<\/li>\n<li><strong>Inspect Packet Punts (IOS-XE):<\/strong> Execute <code>show platform software punt statistics<\/code>. Identify which punt cause increments rapidly (e.g., ARP resolution, TTL expired, ICMP redirects, or unestablished ACL matches).<\/li>\n<li><strong>Check for Excessive Logging:<\/strong> Access control lists ending with the <code>log<\/code> or <code>log-input<\/code> argument force matching packets out of hardware ASIC forwarding into software to generate syslog messages. Remove logging keywords under active attack or heavy traffic conditions.<\/li>\n<\/ol>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Diagnose_High_CPU_Caused_by_High_Process_Usage\"><\/span>Step 2: Diagnose High CPU Caused by High Process Usage<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If interrupt levels are low and specific processes dominate <code>show processes cpu sorted 5min<\/code>:<\/p>\n<ul>\n<li><strong><code>IP Input<\/code>:<\/strong> Indicates software-switched packets are queuing up for processor attention. Correlate with <code>show interfaces<\/code> looking for broadcast floods or runt\/giant framing errors.<\/li>\n<li><strong><code>BGP Router<\/code> or <code>OSPF-x-Router<\/code>:<\/strong> High load during convergence is normal. If persistent, check neighbor flapping using <code>show ip bgp summary<\/code> or <code>show ip ospf neighbor<\/code>, and check for unstable flapping prefixes via route flap damping or external upstreams.<\/li>\n<li><strong><code>SNMP ENGINE<\/code>:<\/strong> Indicates that an external Network Management System (NMS) is walking large MIB trees (such as complete IP routing tables) with tight polling intervals. Adjust polling intervals or restrict MIB views.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Diagnose_Memory_Leaks_and_Buffer_Depletion\"><\/span>Step 3: Diagnose Memory Leaks and Buffer Depletion<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Memory issues typically present as allocation failures or persistent pool drainage:<\/p>\n<ol>\n<li><strong>Identify the Leaking Process:<\/strong> Run <code>show processes memory sorted<\/code>. Record the top allocating processes. Repeat the command over several hours. If a process shows monotonically increasing <code>Holding<\/code> memory that never releases, it points to a Cisco software defect (memory leak).<\/li>\n<li><strong>Check for Buffer Starvation:<\/strong> Execute <code>show buffers<\/code>. Look at the <code>Small<\/code>, <code>Middle<\/code>, <code>Big<\/code>, <code>VeryBig<\/code>, and <code>Large<\/code> buffer headers. Rapidly incrementing <code>failures<\/code> and <code>no memory<\/code> counters indicate that interface bursts have starved available system buffers, leading to packet drops.<\/li>\n<\/ol>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Remediation_Strategies\"><\/span>Step 4: Remediation Strategies<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Implement Control Plane Policing (CoPP):<\/strong> Protect the Route Processor from packet floods by rate-limiting control plane traffic (ICMP, SSH, routing protocols) using modular QoS CLI (MQC).<\/li>\n<li><strong>Tune Infrastructure Services:<\/strong> Increase SNMP poll intervals from 30 seconds to 300 seconds; rate-limit SSH management sessions; disable unused IP services (<code>no ip redirects<\/code>, <code>no ip unreachables<\/code>, <code>no ip proxy-arp<\/code>).<\/li>\n<li><strong>Address Software Defects:<\/strong> If <code>show processes memory sorted<\/code> confirms a memory leak in core system routines (e.g., <code>Net Input<\/code> or <code>BGP Router<\/code>), consult the Cisco Bug Search Tool using your current IOS\/IOS-XE release and schedule a maintenance upgrade.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Automating_Resource_Monitoring_with_Python_and_Cisco_EEM\"><\/span>Automating Resource Monitoring with Python and Cisco EEM<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Relying entirely on manual CLI inspection is impractical across large networks. Engineers can automate data collection using centralized scripts or on-box event handlers.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"1_Python_Netmiko_Automation_Script\"><\/span>1. Python (Netmiko) Automation Script<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The following script connects to a Cisco router, queries CPU and memory health, parses the current operational state, and alerts if values exceed specified thresholds.<\/p>\n<pre><code class=\"language-python\">import re\nfrom netmiko import ConnectHandler\n\nROUTER_DEVICE = {\n    &quot;device_type&quot;: &quot;cisco_ios&quot;,\n    &quot;host&quot;: &quot;192.168.1.1&quot;,\n    &quot;username&quot;: &quot;admin&quot;,\n    &quot;password&quot;: &quot;SecurePassword123&quot;,\n    &quot;secret&quot;: &quot;EnableSecret123&quot;,\n}\n\nCPU_THRESHOLD = 80  # Percent\nMEM_FREE_THRESHOLD = 15  # Minimum percent free memory\n\n\ndef inspect_router_health(device_params):\n    connection = ConnectHandler(**device_params)\n    connection.enable()\n\n    # 1. Evaluate CPU Utilization\n    cpu_output = connection.send_command(&quot;show processes cpu&quot;)\n    cpu_regex = r&quot;five minutes:\\s+(\\d+)%&quot;\n    cpu_match = re.search(cpu_regex, cpu_output)\n\n    if cpu_match:\n        cpu_5min = int(cpu_match.group(1))\n        print(f&quot;[{device_params['host']}] 5-Minute CPU Utilization: {cpu_5min}%&quot;)\n        if cpu_5min &gt;= CPU_THRESHOLD:\n            print(f&quot;  [ALERT] CPU exceeded threshold ({CPU_THRESHOLD}%)!&quot;)\n    else:\n        print(&quot;  [ERROR] Unable to parse CPU metrics.&quot;)\n\n    # 2. Evaluate Memory Statistics\n    mem_output = connection.send_command(&quot;show memory statistics&quot;)\n    # Captures: Pool, Head, Total, Used, Free\n    mem_regex = r&quot;^Processor\\s+[0-9a-fA-F]+\\s+(\\d+)\\s+(\\d+)\\s+(\\d+)&quot;\n    mem_match = re.search(mem_regex, mem_output, re.MULTILINE)\n\n    if mem_match:\n        total_mem = int(mem_match.group(1))\n        used_mem = int(mem_match.group(2))\n        free_mem = int(mem_match.group(3))\n\n        free_percent = (free_mem \/ total_mem) * 100\n        print(\n            f&quot;[{device_params['host']}] Processor RAM: {free_percent:.2f}% Free &quot;\n            f&quot;({free_mem} \/ {total_mem} bytes)&quot;\n        )\n\n        if free_percent &lt;= MEM_FREE_THRESHOLD:\n            print(f&quot;  [ALERT] Free memory below threshold ({MEM_FREE_THRESHOLD}%)!&quot;)\n    else:\n        print(&quot;  [ERROR] Unable to parse memory pool metrics.&quot;)\n\n    connection.disconnect()\n\n\nif __name__ == &quot;__main__&quot;:\n    inspect_router_health(ROUTER_DEVICE)\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"2_Cisco_Embedded_Event_Manager_EEM_On-Box_Applet\"><\/span>2. Cisco Embedded Event Manager (EEM) On-Box Applet<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>You can configure Cisco routers to autonomously monitor their own processor thresholds and capture diagnostic dumps locally when a spike occurs.<\/p>\n<pre><code class=\"language-cisco\">! Define an EEM applet triggering when 5-min CPU exceeds 80%\nevent manager applet MONITOR_HIGH_CPU\n event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.5.1 get-type exact entry-op gt entry-val 80 poll-interval 10\n action 1.0 syslog priority critical msg &quot;EEM: High CPU detected (&gt;80%). Logging processes.&quot;\n action 2.0 cli command &quot;enable&quot;\n action 3.0 cli command &quot;show clock | append flash:cpu_diagnostic.log&quot;\n action 4.0 cli command &quot;show processes cpu sorted 5min | append flash:cpu_diagnostic.log&quot;\n action 5.0 cli command &quot;show memory statistics | append flash:cpu_diagnostic.log&quot;\n<\/code><\/pre>\n<p><em>Note: OID <code>1.3.6.1.4.1.9.9.109.1.1.1.1.5.1<\/code> maps to the <code>cpmCPUTotal5minRev<\/code> metric in the <code>CISCO-PROCESS-MIB<\/code>.<\/em><\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Enterprise_Monitoring_Tools_for_Continuous_Tracking\"><\/span>Enterprise Monitoring Tools for Continuous Tracking<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Enterprise infrastructure requires continuous monitoring systems (NMS) to collect metrics, graph historical trends, and trigger proactive alerts before resource depletion affects end users.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Tool<\/th>\n<th style=\"text-align: left;\">Primary Collection Protocol<\/th>\n<th style=\"text-align: left;\">Deployment Model<\/th>\n<th style=\"text-align: left;\">Alerting &amp; Telemetry Strengths<\/th>\n<th style=\"text-align: left;\">Best Suited For<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Cisco Catalyst Center<\/strong> <em>(formerly DNA Center)<\/em><\/td>\n<td style=\"text-align: left;\">Streaming Telemetry (gNMI\/NETCONF), SNMP<\/td>\n<td style=\"text-align: left;\">On-Premises Appliance<\/td>\n<td style=\"text-align: left;\">Machine-learning baselining; automated Root Cause Analysis (RCA); native stack analytics.<\/td>\n<td style=\"text-align: left;\">Pure Cisco enterprise environments requiring deep hardware lifecycle telemetry.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>SolarWinds Network Performance Monitor (NPM)<\/strong><\/td>\n<td style=\"text-align: left;\">SNMPv2c\/SNMPv3, WMI<\/td>\n<td style=\"text-align: left;\">On-Premises Windows Server<\/td>\n<td style=\"text-align: left;\">Pre-built Cisco MIB support; automatic threshold alerts; interface packet correlation.<\/td>\n<td style=\"text-align: left;\">Traditional mid-to-large enterprise data centers managing multi-vendor gear.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>PRTG Network Monitor<\/strong><\/td>\n<td style=\"text-align: left;\">SNMP, NetFlow, REST API<\/td>\n<td style=\"text-align: left;\">On-Premises Windows Server<\/td>\n<td style=\"text-align: left;\">Out-of-the-box Cisco CPU\/Memory sensor templates; color-coded threshold status.<\/td>\n<td style=\"text-align: left;\">Small to mid-sized IT teams seeking quick deployment with minimal configuration overhead.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Zabbix<\/strong><\/td>\n<td style=\"text-align: left;\">SNMP, Zabbix Agent, IPMI<\/td>\n<td style=\"text-align: left;\">Self-Hosted Linux (Open Source)<\/td>\n<td style=\"text-align: left;\">Highly customizable low-level discovery (LLD); trigger expressions for sustained loads; zero licensing cost.<\/td>\n<td style=\"text-align: left;\">Engineering teams prioritizing open-source observability and custom trigger logic.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Prometheus + Grafana<\/strong><\/td>\n<td style=\"text-align: left;\">SNMP Exporter, gNMI Telemetry<\/td>\n<td style=\"text-align: left;\">Containerized \/ Hybrid Cloud<\/td>\n<td style=\"text-align: left;\">High-frequency time-series storage; PromQL query flexibility; rich visual dashboards.<\/td>\n<td style=\"text-align: left;\">Modern NetDevOps operations integrating network infrastructure into cloud-native observability stacks.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Official_Cisco_Documentation_and_Reference_Guides\"><\/span>Official Cisco Documentation and Reference Guides<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For authoritative guidance, formal definitions, and TAC escalation requirements, consult the following official documentation resources:<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Core_TAC_Troubleshooting_Notes\"><\/span>Core TAC Troubleshooting Notes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Cisco TAC Document ID 46109:<\/strong> <em>Troubleshooting High CPU Utilization on Cisco Routers<\/em><br \/>\n    Defines structural differences between process-level and interrupt-level resource starvation across standard architectures.<\/li>\n<li><strong>Cisco TAC Document ID 15130:<\/strong> <em>Troubleshooting Memory Problems on Cisco Routers<\/em><br \/>\n    Comprehensive guide for resolving <code>SYS-2-MALLOCFAIL<\/code> errors, pool fragmentation, and tracing processor memory allocation routines.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Key_Cisco_Architecture_Concepts\"><\/span>Key Cisco Architecture Concepts<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Cisco Express Forwarding (CEF) Switching:<\/strong><br \/>\n    Documents the separation between the distributed hardware forwarding plane and the central software route engine. Disabling CEF remains the primary cause of sudden interrupt-level CPU spikes.<\/li>\n<li><strong>Control Plane Policing (CoPP):<\/strong><br \/>\n    Cisco IOS and IOS-XE architectural framework used to configure QoS filters on traffic directed at the router&#8217;s physical Route Processor.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Standard_MIB_References_for_System_Resources\"><\/span>Standard MIB References for System Resources<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong><code>CISCO-PROCESS-MIB<\/code> (<code>1.3.6.1.4.1.9.9.109<\/code>):<\/strong><br \/>\n    Contains official OIDs for evaluating individual core loads and task schedulers (<code>cpmCPUTotal5secRev<\/code>, <code>cpmCPUTotal1minRev<\/code>, <code>cpmCPUTotal5minRev<\/code>).<\/li>\n<li><strong><code>CISCO-MEMORY-POOL-MIB<\/code> (<code>1.3.6.1.4.1.9.9.48<\/code>):<\/strong><br \/>\n    Provides standardized SNMP access to data pool structures (<code>ciscoMemoryPoolUsed<\/code>, <code>ciscoMemoryPoolFree<\/code>, <code>ciscoMemoryPoolLargestFree<\/code>).<\/li>\n<\/ul>\n<hr \/>\n<p>Maintaining stable CPU and memory utilization on a Cisco router requires understanding the division between control plane processing and data plane forwarding. By using sorted CLI commands, distinguishing interrupt load from process load, establishing regular baselines, and implementing automated scripts or NMS tools, network engineers can spot and mitigate performance issues before they cause network outages.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fcheck-cpu-and-memory-utilization-cisco-router_24571.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+CPU+and+Memory+Utilization+in+Cisco+Router+https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\",\"How to Check CPU and Memory Utilization in Cisco Router\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Sustained high resource utilization on a Cisco router degrades forwarding performance, increases packet transit latency, and can destabilize control plane protocols such as BGP, OSPF, and LDP. When control plane queues fill up, keepalive packets drop, leading to peer timeouts and network flaps. Routinely checking and establishing baselines for CPU and RAM consumption enables network&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check CPU and Memory Utilization in Cisco Router - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check CPU and Memory Utilization in Cisco Router - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Sustained high resource utilization on a Cisco router degrades forwarding performance, increases packet transit latency, and can destabilize control plane protocols such as BGP, OSPF, and LDP. When control plane queues fill up, keepalive packets drop, leading to peer timeouts and network flaps. Routinely checking and establishing baselines for CPU and RAM consumption enables network... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-17T06:49:09+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\",\"name\":\"How to Check CPU and Memory Utilization in Cisco Router - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-17T06:49:09+00:00\",\"dateModified\":\"2026-11-17T06:49:09+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check CPU and Memory Utilization in Cisco Router\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check CPU and Memory Utilization in Cisco Router\",\"datePublished\":\"2026-11-17T06:49:09+00:00\",\"dateModified\":\"2026-11-17T06:49:09+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#webpage\"},\"wordCount\":1625,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check CPU and Memory Utilization in Cisco Router - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html","og_locale":"en_US","og_type":"article","og_title":"How to Check CPU and Memory Utilization in Cisco Router - SPOTO Official Blog","og_description":"Sustained high resource utilization on a Cisco router degrades forwarding performance, increases packet transit latency, and can destabilize control plane protocols such as BGP, OSPF, and LDP. When control plane queues fill up, keepalive packets drop, leading to peer timeouts and network flaps. Routinely checking and establishing baselines for CPU and RAM consumption enables network... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-17T06:49:09+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html","name":"How to Check CPU and Memory Utilization in Cisco Router - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-17T06:49:09+00:00","dateModified":"2026-11-17T06:49:09+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check CPU and Memory Utilization in Cisco Router"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check CPU and Memory Utilization in Cisco Router","datePublished":"2026-11-17T06:49:09+00:00","dateModified":"2026-11-17T06:49:09+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#webpage"},"wordCount":1625,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/check-cpu-and-memory-utilization-cisco-router_24571.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24571"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24571"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24571\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24571"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24571"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24571"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}