{"id":24520,"date":"2026-11-16T11:52:07","date_gmt":"2026-11-16T03:52:07","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html"},"modified":"2026-11-16T11:52:07","modified_gmt":"2026-11-16T03:52:07","slug":"how-to-check-bgp-timers-on-cisco-router","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html","title":{"rendered":"How to Check BGP Timers on Cisco Router"},"content":{"rendered":"<p>Border Gateway Protocol (BGP) relies on periodic heartbeat messages and countdown timers to verify neighbor reachability and detect broken paths. When peering over complex wide-area networks or internal backbones, verifying that both routers agree on acceptable timer intervals is essential for routing stability.<\/p>\n<p>Whether you are auditing existing sessions, adjusting convergence speeds, or investigating unexpected session flaps, understanding how Cisco routers display, negotiate, and enforce BGP timers gives you direct control over your routing health. This guide covers how to inspect active and configured timers on Cisco IOS and IOS-XE devices, how timer negotiation functions, how to apply configuration templates, how to troubleshoot hold-time drops, and when to choose BFD over aggressive timer tuning.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Frequently_Asked_Questions_About_Cisco_BGP_Timers_and_Negotiation\" title=\"Frequently Asked Questions About Cisco BGP Timers and Negotiation\">Frequently Asked Questions About Cisco BGP Timers and Negotiation<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#What_are_the_default_BGP_keepalive_and_hold_time_values_on_Cisco_routers\" title=\"What are the default BGP keepalive and hold time values on Cisco routers?\">What are the default BGP keepalive and hold time values on Cisco routers?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#How_do_Cisco_routers_negotiate_BGP_timers_during_session_establishment\" title=\"How do Cisco routers negotiate BGP timers during session establishment?\">How do Cisco routers negotiate BGP timers during session establishment?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#What_happens_if_a_BGP_peer_advertises_a_hold_time_of_zero\" title=\"What happens if a BGP peer advertises a hold time of zero?\">What happens if a BGP peer advertises a hold time of zero?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#What_is_the_Cisco_minimum_hold_time_feature\" title=\"What is the Cisco minimum hold time feature?\">What is the Cisco minimum hold time feature?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step-by-Step_Guide_How_to_Verify_Active_BGP_Timers_on_Cisco_CLI\" title=\"Step-by-Step Guide: How to Verify Active BGP Timers on Cisco CLI\">Step-by-Step Guide: How to Verify Active BGP Timers on Cisco CLI<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_1_Identify_the_Peer_IP_and_Operational_Status\" title=\"Step 1: Identify the Peer IP and Operational Status\">Step 1: Identify the Peer IP and Operational Status<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_2_Run_the_Detailed_Neighbor_Inspection_Command\" title=\"Step 2: Run the Detailed Neighbor Inspection Command\">Step 2: Run the Detailed Neighbor Inspection Command<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_3_Locate_the_Active_and_Configured_Timer_Section\" title=\"Step 3: Locate the Active and Configured Timer Section\">Step 3: Locate the Active and Configured Timer Section<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_4_Filter_Output_for_Quick_Audits\" title=\"Step 4: Filter Output for Quick Audits\">Step 4: Filter Output for Quick Audits<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Cisco_Command_Reference_show_ip_bgp_neighbors_Timer_Fields\" title=\"Cisco Command Reference: show ip bgp neighbors Timer Fields\">Cisco Command Reference: show ip bgp neighbors Timer Fields<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Syntax\" title=\"Syntax\">Syntax<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Output_Field_Definitions\" title=\"Output Field Definitions\">Output Field Definitions<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Cisco_BGP_Timers_Configuration_Command_Templates\" title=\"Cisco BGP Timers Configuration Command Templates\">Cisco BGP Timers Configuration Command Templates<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Template_1_Global_BGP_Process_Timers\" title=\"Template 1: Global BGP Process Timers\">Template 1: Global BGP Process Timers<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Template_2_Per-Neighbor_BGP_Timers\" title=\"Template 2: Per-Neighbor BGP Timers\">Template 2: Per-Neighbor BGP Timers<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Template_3_Peer-Session_Template_BGP_Dynamic_Templates\" title=\"Template 3: Peer-Session Template (BGP Dynamic Templates)\">Template 3: Peer-Session Template (BGP Dynamic Templates)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Troubleshooting_Guide_Diagnosing_BGP_Hold_Timer_Expired_Errors\" title=\"Troubleshooting Guide: Diagnosing &#8220;BGP Hold Timer Expired&#8221; Errors\">Troubleshooting Guide: Diagnosing &#8220;BGP Hold Timer Expired&#8221; Errors<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_1_Check_Control_Plane_and_CPU_Utilization\" title=\"Step 1: Check Control Plane and CPU Utilization\">Step 1: Check Control Plane and CPU Utilization<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_2_Test_Path_MTU_Discovery_PMTUD_and_Large_Frame_Drops\" title=\"Step 2: Test Path MTU Discovery (PMTUD) and Large Frame Drops\">Step 2: Test Path MTU Discovery (PMTUD) and Large Frame Drops<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_3_Inspect_Physical_Layer_Drops_and_Queue_Exhaustion\" title=\"Step 3: Inspect Physical Layer Drops and Queue Exhaustion\">Step 3: Inspect Physical Layer Drops and Queue Exhaustion<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Step_4_Verify_Control_Plane_Policing_CoPP\" title=\"Step 4: Verify Control Plane Policing (CoPP)\">Step 4: Verify Control Plane Policing (CoPP)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Architectural_Tuning_Aggressive_BGP_Timers_vs_BFD_for_Fast_Convergence\" title=\"Architectural Tuning: Aggressive BGP Timers vs. BFD for Fast Convergence\">Architectural Tuning: Aggressive BGP Timers vs. BFD for Fast Convergence<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Enabling_BFD_for_BGP_on_Cisco_Routers\" title=\"Enabling BFD for BGP on Cisco Routers\">Enabling BFD for BGP on Cisco Routers<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions_About_Cisco_BGP_Timers_and_Negotiation\"><\/span>Frequently Asked Questions About Cisco BGP Timers and Negotiation<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"What_are_the_default_BGP_keepalive_and_hold_time_values_on_Cisco_routers\"><\/span>What are the default BGP keepalive and hold time values on Cisco routers?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>By default, Cisco IOS, IOS-XE, and IOS-XR use a <strong>Keepalive interval of 60 seconds<\/strong> and a <strong>Hold Time of 180 seconds<\/strong>. The hold time defines the maximum duration (in seconds) that a router will wait to receive a BGP message (such as a KEEPALIVE or UPDATE) from a peer before declaring the neighbor dead and tearing down the peering session. Following the standard RFC 4271 specification, Cisco sets the hold time to exactly three times the keepalive interval.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"How_do_Cisco_routers_negotiate_BGP_timers_during_session_establishment\"><\/span>How do Cisco routers negotiate BGP timers during session establishment?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When two BGP routers initiate a TCP connection (port 179) and transition to the <code>OpenSent<\/code> state, each router transmits a BGP OPEN message containing its locally configured hold time. During the exchange:<br \/>\n1. Both peers inspect the proposed hold time in the received OPEN message.<br \/>\n2. The peers select the <strong>smaller (minimum)<\/strong> value between the two proposals as the negotiated session hold time.<br \/>\n3. The keepalive interval is dynamically calculated by dividing the negotiated hold time by three (or by adopting the locally configured keepalive if it is already smaller).<\/p>\n<p>For instance, if Router A configures <code>timers bgp 10 30<\/code> and Router B uses default timers (<code>60 180<\/code>), both routers converge on an active hold time of <strong>30 seconds<\/strong> and an active keepalive interval of <strong>10 seconds<\/strong>.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_happens_if_a_BGP_peer_advertises_a_hold_time_of_zero\"><\/span>What happens if a BGP peer advertises a hold time of zero?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If either router advertises a hold time of <code>0<\/code> in its OPEN message, timer tracking is disabled entirely. The session will never expire due to missed heartbeats, and periodic keepalive packets are not transmitted. This setting is sometimes used in specific lab or virtualized topologies, but it is not recommended for production environments because dead peer links cannot be detected at Layer 3 without lower-layer link triggers.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_is_the_Cisco_minimum_hold_time_feature\"><\/span>What is the Cisco minimum hold time feature?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco routers allow you to configure a minimum acceptable hold time (<code>min-holdtime<\/code>). If a remote peer proposes a hold time that is strictly less than the local router&#8217;s configured <code>min-holdtime<\/code>, the local router rejects the session and sends a BGP NOTIFICATION message with Error Code 2 (OPEN Message Error), Subcode 6 (Unacceptable Hold Time). This prevents misconfigured external peers from forcing an unsustainably low hold time on your control plane.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_How_to_Verify_Active_BGP_Timers_on_Cisco_CLI\"><\/span>Step-by-Step Guide: How to Verify Active BGP Timers on Cisco CLI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To inspect your current BGP timers, execute these steps from privileged EXEC mode (<code>Router#<\/code>).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Identify_the_Peer_IP_and_Operational_Status\"><\/span>Step 1: Identify the Peer IP and Operational Status<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Before drilling into timer details, confirm the neighbor address and ensure the session is in the <code>Established<\/code> state:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp summary\n<\/code><\/pre>\n<p>Look for your target neighbor IP in the output table and verify that the <code>State\/PfxRcd<\/code> column shows a numeric prefix count rather than an active transition state such as <code>Idle<\/code>, <code>Active<\/code>, or <code>Connect<\/code>.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Run_the_Detailed_Neighbor_Inspection_Command\"><\/span>Step 2: Run the Detailed Neighbor Inspection Command<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Execute the <code>show ip bgp neighbors<\/code> command, specifying the peer IP address:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp neighbors 192.0.2.2\n<\/code><\/pre>\n<p><em>(Note: On modern IOS-XE and address-family-aware configurations, <code>show bgp ipv4 unicast neighbors 192.0.2.2<\/code> provides equivalent output).<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Locate_the_Active_and_Configured_Timer_Section\"><\/span>Step 3: Locate the Active and Configured Timer Section<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Within the first 25 lines of the command output, identify the block detailing hold time and keepalives:<\/p>\n<pre><code class=\"language-text\">BGP neighbor is 192.0.2.2,  remote AS 65001, external link\n  BGP version 4, remote router ID 192.0.2.2\n  BGP state = Established, up for 04:12:38\n  Last read 00:00:14, last write 00:00:18, hold time is 180, keepalive interval is 60 seconds\n  Configured hold time is 180, keepalive interval is 60 seconds\n  Minimum holdtime from neighbor is 0 seconds\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Filter_Output_for_Quick_Audits\"><\/span>Step 4: Filter Output for Quick Audits<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If you are auditing multiple peers or want an immediate snapshot without reading full neighbor statistics, pipe the output through an include filter:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp neighbors 192.0.2.2 | include [Hh]old [Tt]ime|[Kk]eepalive|Last read\n<\/code><\/pre>\n<p>This filter returns the exact lines showing the active negotiated values, the locally configured values, and the countdown since the last packet was processed.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Command_Reference_show_ip_bgp_neighbors_Timer_Fields\"><\/span>Cisco Command Reference: <code>show ip bgp neighbors<\/code> Timer Fields<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>This section provides technical field specifications for timer-related parameters displayed in the Cisco IOS \/ IOS-XE command line output for <code>show ip bgp neighbors [ip-address]<\/code>.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Syntax\"><\/span>Syntax<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">show ip bgp neighbors [ip-address]\nshow bgp [ipv4 | ipv6] unicast neighbors [ip-address]\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Output_Field_Definitions\"><\/span>Output Field Definitions<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Field Name<\/th>\n<th style=\"text-align: left;\">Data Type<\/th>\n<th style=\"text-align: left;\">Description<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><code>hold time is &lt;seconds&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Integer<\/td>\n<td style=\"text-align: left;\">The active, negotiated hold time governing the current session. If no BGP message arrives before this timer reaches zero, the peering drops.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>keepalive interval is &lt;seconds&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Integer<\/td>\n<td style=\"text-align: left;\">The active interval at which the local Cisco router transmits periodic KEEPALIVE frames to the neighbor.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>Configured hold time is &lt;seconds&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Integer<\/td>\n<td style=\"text-align: left;\">The hold time configured locally in the router configuration under the BGP process or neighbor statement.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>Configured keepalive interval is &lt;seconds&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Integer<\/td>\n<td style=\"text-align: left;\">The keepalive interval configured locally prior to negotiation.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>Minimum holdtime from neighbor is &lt;seconds&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Integer<\/td>\n<td style=\"text-align: left;\">The configured threshold representing the lowest hold time value this router will accept from the peer during OPEN negotiation.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>Last read &lt;hh:mm:ss&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Time format<\/td>\n<td style=\"text-align: left;\">Time elapsed since the local router last received and processed any valid BGP message from this neighbor.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>Last write &lt;hh:mm:ss&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Time format<\/td>\n<td style=\"text-align: left;\">Time elapsed since the local router last generated and sent a BGP message to this neighbor over the TCP socket.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_BGP_Timers_Configuration_Command_Templates\"><\/span>Cisco BGP Timers Configuration Command Templates<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To change BGP timers from their defaults, you can apply settings globally across all neighbors or target a specific peer. Use the templates below.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Template_1_Global_BGP_Process_Timers\"><\/span>Template 1: Global BGP Process Timers<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Applies default timer parameters to all neighbors configured under the BGP autonomous system that do not have an explicit per-neighbor override.<\/p>\n<pre><code class=\"language-ios\">! Enter global configuration mode\nconfigure terminal\n\nrouter bgp &lt;LOCAL_ASN&gt;\n ! Syntax: timers bgp &lt;keepalive&gt; &lt;holdtime&gt; [min-holdtime]\n timers bgp 10 30 20\n exit\n\nend\nwrite memory\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Template_2_Per-Neighbor_BGP_Timers\"><\/span>Template 2: Per-Neighbor BGP Timers<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Overrides global process timers for a specific peer. This is commonly required when connecting to internet service providers or public exchange points with mandatory timer policies.<\/p>\n<pre><code class=\"language-ios\">configure terminal\n\nrouter bgp &lt;LOCAL_ASN&gt;\n ! Configure peer-specific timers\n neighbor &lt;NEIGHBOR_IP&gt; timers &lt;KEEPALIVE&gt; &lt;HOLDTIME&gt; [MIN_HOLDTIME]\n\n ! Example: 5-second keepalive, 15-second hold time, 10-second minimum acceptable\n neighbor 192.0.2.2 timers 5 15 10\n exit\n\nend\nwrite memory\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Template_3_Peer-Session_Template_BGP_Dynamic_Templates\"><\/span>Template 3: Peer-Session Template (BGP Dynamic Templates)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For modern enterprise deployments using BGP peer templates on Cisco IOS-XE, configure timers inside a reusable session template:<\/p>\n<pre><code class=\"language-ios\">configure terminal\n\nrouter bgp &lt;LOCAL_ASN&gt;\n template peer-session CORE_PEER_SESSION\n  timers 10 30 20\n exit-peer-session\n\n neighbor &lt;NEIGHBOR_IP&gt; inherit peer-session CORE_PEER_SESSION\n exit\n\nend\nwrite memory\n<\/code><\/pre>\n<p><em>Note: Changing timers on an active neighbor causes the BGP peering session to reset as the routers exchange new OPEN messages to renegotiate values.<\/em><\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Guide_Diagnosing_BGP_Hold_Timer_Expired_Errors\"><\/span>Troubleshooting Guide: Diagnosing &#8220;BGP Hold Timer Expired&#8221; Errors<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When a neighbor drops due to missed heartbeats, Cisco IOS outputs the following syslog message:<\/p>\n<pre><code class=\"language-text\">%BGP-5-ADJCHANGE: neighbor 192.0.2.2 Down - BGP Notification sent\n%BGP-3-NOTIFICATION: sent to neighbor 192.0.2.2 4\/0 (hold timer expired) 0 bytes\n<\/code><\/pre>\n<p>This error indicates that the local router failed to receive any BGP packet from the peer for the duration of the negotiated hold time window. Follow this sequential diagnostic path to isolate the root cause.<\/p>\n<pre><code>+-------------------------------------------------------------+\n|          Syslog: BGP Hold Timer Expired (Notification 4\/0)   |\n+-------------------------------------------------------------+\n                              |\n                              v\n+-------------------------------------------------------------+\n| Step 1: Check Control Plane &amp; CPU Health                     |\n| Command: show processes cpu sorted | exclude 0.00           |\n| Is the BGP Router or IP Input process starved (&gt;90% CPU)?   |\n+-------------------------------------------------------------+\n            |                               |\n           YES                             NO\n            |                               |\n            v                               v\n [Mitigate CPU Spikes]       +--------------------------------+\n                             | Step 2: Check MTU \/ PMTUD Drops|\n                             | Ping with DF bit set:          |\n                             | ping &lt;peer&gt; size 1500 df-bit   |\n                             +--------------------------------+\n                                            |\n                         +------------------+------------------+\n                         |                                     |\n                       FAILS                                PASSES\n                         |                                     |\n                         v                                     v\n               [Fix Path MTU Mismatch]       +---------------------------------+\n                                             | Step 3: Inspect Drops \/ CoPP    |\n                                             | - show interface (CRC\/overruns) |\n                                             | - show policy-map control-plane |\n                                             +---------------------------------+\n                                                               |\n                                                               v\n                                                 [Review Drops on TCP 179]\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Check_Control_Plane_and_CPU_Utilization\"><\/span>Step 1: Check Control Plane and CPU Utilization<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>BGP runs in user space as a control-plane process. If the route processor experiences high CPU utilization, it may fail to process incoming keepalive packets or starve the BGP scheduler:<\/p>\n<pre><code class=\"language-text\">Router# show processes cpu sorted | exclude 0.00\n<\/code><\/pre>\n<p>Inspect the output for processes like <code>BGP Router<\/code>, <code>IP Input<\/code>, or high interrupt percentages (<code>CPU utilization for five seconds: X%\/Y%<\/code>). If interrupt overhead is high, investigate switching loops, broadcast storms, or transit traffic hitting the CPU.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Test_Path_MTU_Discovery_PMTUD_and_Large_Frame_Drops\"><\/span>Step 2: Test Path MTU Discovery (PMTUD) and Large Frame Drops<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>A classic cause of intermittent hold-timer expiration is an MTU mismatch along the transit path. Small BGP KEEPALIVE frames (19 bytes) traverse the link without issue, but large BGP UPDATE frames exceeding the link MTU are dropped silently if Path MTU Discovery is broken.<\/p>\n<ol>\n<li>Test ping packets with the Don&#8217;t Fragment (DF) bit enabled across the peering path:<br \/>\n   <code>text<br \/>\n   Router# ping 192.0.2.2 size 1500 df-bit<\/code><\/li>\n<li>If large packets drop, reduce your BGP neighbor maximum segment size or enable PMTUD:<br \/>\n   <code>ios<br \/>\n   Router(config)# router bgp &lt;LOCAL_ASN&gt;<br \/>\n   Router(config-router)# neighbor 192.0.2.2 path-mtu-discovery<\/code><\/li>\n<\/ol>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Inspect_Physical_Layer_Drops_and_Queue_Exhaustion\"><\/span>Step 3: Inspect Physical Layer Drops and Queue Exhaustion<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Check the transit interface connecting to the peer for input drops, overruns, or frame errors:<\/p>\n<pre><code class=\"language-text\">Router# show interface GigabitEthernet0\/0\/1 | include drops|errors|overrun\n<\/code><\/pre>\n<p>High input queue drops or cyclic redundancy check (CRC) errors indicate physical-layer corruption or interface congestion, which causes bursts of dropped TCP segments that prevent keepalives from being acknowledged in time.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Verify_Control_Plane_Policing_CoPP\"><\/span>Step 4: Verify Control Plane Policing (CoPP)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Control Plane Policing policies protect the route processor from denial-of-service traffic. If your CoPP policy restricts TCP port 179 traffic too aggressively, incoming keepalives will be discarded during traffic surges:<\/p>\n<pre><code class=\"language-text\">Router# show policy-map control-plane | section BGP|tcp\n<\/code><\/pre>\n<p>Ensure the class-map matching BGP permits sufficient bandwidth to absorb transient routing updates without dropping standard control-plane heartbeats.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Architectural_Tuning_Aggressive_BGP_Timers_vs_BFD_for_Fast_Convergence\"><\/span>Architectural Tuning: Aggressive BGP Timers vs. BFD for Fast Convergence<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To accelerate link-failure detection, network engineers often consider lowering BGP timers to aggressive intervals (e.g., <code>timers bgp 1 3<\/code>). However, doing so places a heavy burden on the router&#8217;s main CPU. A superior alternative on enterprise hardware is Bidirectional Forwarding Detection (BFD).<\/p>\n<p>The following comparison table breaks down the operational trade-offs between tuning standard BGP timers and offloading failure detection to BFD.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Evaluation Criteria<\/th>\n<th style=\"text-align: left;\">Aggressive BGP Timers (e.g., 1s \/ 3s)<\/th>\n<th style=\"text-align: left;\">Bidirectional Forwarding Detection (BFD)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Typical Failover Detection<\/strong><\/td>\n<td style=\"text-align: left;\">3 to 9 seconds<\/td>\n<td style=\"text-align: left;\">50 to 300 milliseconds (sub-second)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>CPU Processing Location<\/strong><\/td>\n<td style=\"text-align: left;\">Route Processor (Software Control Plane)<\/td>\n<td style=\"text-align: left;\">Offloaded to Line Cards \/ ASIC Hardware Plane<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Control Plane Overhead<\/strong><\/td>\n<td style=\"text-align: left;\">High; each peer requires CPU-scheduled packet generation<\/td>\n<td style=\"text-align: left;\">Minimal; keepalives are managed by microcode engines<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>False-Positive Flap Risk<\/strong><\/td>\n<td style=\"text-align: left;\">High; temporary CPU spikes (&gt;85%) can cause session drops<\/td>\n<td style=\"text-align: left;\">Extremely low; independent of route-processor load<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Multi-Protocol Reusability<\/strong><\/td>\n<td style=\"text-align: left;\">None (applies only to the specific BGP session)<\/td>\n<td style=\"text-align: left;\">High; a single BFD session can trigger OSPF, BGP, and static routes<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>WAN Link Scalability<\/strong><\/td>\n<td style=\"text-align: left;\">Poor; fails to scale beyond dozens of peers<\/td>\n<td style=\"text-align: left;\">High; supports hundreds of concurrent microsecond sessions<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Configuration Complexity<\/strong><\/td>\n<td style=\"text-align: left;\">Simple (<code>neighbor &lt;ip&gt; timers 1 3<\/code>)<\/td>\n<td style=\"text-align: left;\">Moderate (requires BFD enabled on interface + neighbor fall-over)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Recommended Use Case<\/strong><\/td>\n<td style=\"text-align: left;\">Legacy platforms lacking BFD support; third-party EBGP<\/td>\n<td style=\"text-align: left;\">Data centers, core backbones, and enterprise edge routers<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3><span class=\"ez-toc-section\" id=\"Enabling_BFD_for_BGP_on_Cisco_Routers\"><\/span>Enabling BFD for BGP on Cisco Routers<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When sub-second convergence is required, leave BGP timers at their stable defaults (<code>60 180<\/code>) to prevent false-positive teardowns, and delegate rapid link checking to BFD:<\/p>\n<pre><code class=\"language-ios\">configure terminal\n\n! Enable BFD on the physical interface\ninterface GigabitEthernet0\/0\/1\n bfd interval 100 min_rx 100 multiplier 3\n exit\n\n! Attach BFD tracking to the BGP neighbor\nrouter bgp &lt;LOCAL_ASN&gt;\n neighbor 192.0.2.2 fall-over bfd\n exit\n\nend\n<\/code><\/pre>\n<p>With this architecture, BFD detects forwarding failures in 300 milliseconds (<code>100ms x 3<\/code>) and signals the local BGP process to tear down the peering instantly, eliminating the need to expose the control plane to aggressive 1-second BGP keepalive polling.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Inspecting BGP timers on a Cisco router requires looking beyond basic session uptime to evaluate both negotiated and configured values. Using <code>show ip bgp neighbors &lt;ip&gt;<\/code> and targeted pipe filters, you can immediately identify the active hold time, verify that timer negotiation arrived at the expected interval, and confirm that the session is healthy. When lower convergence times are required, deploy BFD rather than aggressively reducing BGP keepalives to achieve sub-second recovery while protecting your router&#8217;s control plane.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-check-bgp-timers-on-cisco-router_24520.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+BGP+Timers+on+Cisco+Router+https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\",\"How to Check BGP Timers on Cisco Router\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Border Gateway Protocol (BGP) relies on periodic heartbeat messages and countdown timers to verify neighbor reachability and detect broken paths. When peering over complex wide-area networks or internal backbones, verifying that both routers agree on acceptable timer intervals is essential for routing stability. Whether you are auditing existing sessions, adjusting convergence speeds, or investigating unexpected&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check BGP Timers on Cisco Router - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check BGP Timers on Cisco Router - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Border Gateway Protocol (BGP) relies on periodic heartbeat messages and countdown timers to verify neighbor reachability and detect broken paths. When peering over complex wide-area networks or internal backbones, verifying that both routers agree on acceptable timer intervals is essential for routing stability. Whether you are auditing existing sessions, adjusting convergence speeds, or investigating unexpected... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T03:52:07+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\",\"name\":\"How to Check BGP Timers on Cisco Router - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T03:52:07+00:00\",\"dateModified\":\"2026-11-16T03:52:07+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check BGP Timers on Cisco Router\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check BGP Timers on Cisco Router\",\"datePublished\":\"2026-11-16T03:52:07+00:00\",\"dateModified\":\"2026-11-16T03:52:07+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#webpage\"},\"wordCount\":1625,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check BGP Timers on Cisco Router - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html","og_locale":"en_US","og_type":"article","og_title":"How to Check BGP Timers on Cisco Router - SPOTO Official Blog","og_description":"Border Gateway Protocol (BGP) relies on periodic heartbeat messages and countdown timers to verify neighbor reachability and detect broken paths. When peering over complex wide-area networks or internal backbones, verifying that both routers agree on acceptable timer intervals is essential for routing stability. Whether you are auditing existing sessions, adjusting convergence speeds, or investigating unexpected... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T03:52:07+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html","name":"How to Check BGP Timers on Cisco Router - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T03:52:07+00:00","dateModified":"2026-11-16T03:52:07+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check BGP Timers on Cisco Router"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check BGP Timers on Cisco Router","datePublished":"2026-11-16T03:52:07+00:00","dateModified":"2026-11-16T03:52:07+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#webpage"},"wordCount":1625,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-timers-on-cisco-router_24520.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24520"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24520"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24520\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24520"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24520"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24520"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}