{"id":24519,"date":"2026-11-16T11:50:23","date_gmt":"2026-11-16T03:50:23","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html"},"modified":"2026-11-16T11:50:23","modified_gmt":"2026-11-16T03:50:23","slug":"how-to-check-bgp-received-routes-in-cisco","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html","title":{"rendered":"How to Check BGP Received Routes in Cisco"},"content":{"rendered":"<p>When troubleshooting Border Gateway Protocol (BGP) relationships on Cisco hardware, network engineers frequently need to determine whether a remote peer is advertising a specific prefix. While a route may not appear in the active BGP table or the local routing information base (RIB), it might still be arriving at the interface and getting filtered out by an inbound route-map, prefix-list, or AS-path filter. <\/p>\n<p>To isolate filtering issues and verify raw inbound routing updates, Cisco provides commands to inspect incoming BGP announcements. This guide covers how to inspect received BGP routes across Cisco IOS, IOS-XE, NX-OS, and IOS-XR platforms, clarifies the distinction between pre-policy and post-policy tables, addresses common CLI errors, and provides ready-to-use configuration templates.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#BGP_Route_Inspection_received-routes_vs_routes\" title=\"BGP Route Inspection: received-routes vs. routes\">BGP Route Inspection: received-routes vs. routes<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#How_to_Check_Received_Routes_in_Cisco_IOS_and_IOS-XE\" title=\"How to Check Received Routes in Cisco IOS and IOS-XE\">How to Check Received Routes in Cisco IOS and IOS-XE<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Step_1_Identify_the_Target_BGP_Neighbor\" title=\"Step 1: Identify the Target BGP Neighbor\">Step 1: Identify the Target BGP Neighbor<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Step_2_Query_Pre-Policy_Advertisements\" title=\"Step 2: Query Pre-Policy Advertisements\">Step 2: Query Pre-Policy Advertisements<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Step_3_Interpret_the_Command_Output\" title=\"Step 3: Interpret the Command Output\">Step 3: Interpret the Command Output<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Step_4_Filter_Output_for_Specific_Prefixes\" title=\"Step 4: Filter Output for Specific Prefixes\">Step 4: Filter Output for Specific Prefixes<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Troubleshooting_Inbound_Soft_Reconfiguration_Not_Enabled\" title=\"Troubleshooting: &#8220;Inbound Soft Reconfiguration Not Enabled&#8221;\">Troubleshooting: &#8220;Inbound Soft Reconfiguration Not Enabled&#8221;<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Why_does_this_error_occur\" title=\"Why does this error occur?\">Why does this error occur?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Does_BGP_Route_Refresh_eliminate_the_need_for_this_command\" title=\"Does BGP Route Refresh eliminate the need for this command?\">Does BGP Route Refresh eliminate the need for this command?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#What_are_the_memory_implications_of_enabling_soft_reconfiguration\" title=\"What are the memory implications of enabling soft reconfiguration?\">What are the memory implications of enabling soft reconfiguration?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Configuration_Templates_Enabling_Inbound_Soft_Reconfiguration\" title=\"Configuration Templates: Enabling Inbound Soft Reconfiguration\">Configuration Templates: Enabling Inbound Soft Reconfiguration<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Classic_Cisco_IOS_Global_BGP_Process\" title=\"Classic Cisco IOS (Global BGP Process)\">Classic Cisco IOS (Global BGP Process)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Cisco_IOS-XE_Address-Family_Configuration\" title=\"Cisco IOS-XE (Address-Family Configuration)\">Cisco IOS-XE (Address-Family Configuration)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#VRF-Aware_BGP_Template\" title=\"VRF-Aware BGP Template\">VRF-Aware BGP Template<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Checking_Received_Routes_in_Cisco_NX-OS_and_IOS-XR\" title=\"Checking Received Routes in Cisco NX-OS and IOS-XR\">Checking Received Routes in Cisco NX-OS and IOS-XR<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Cisco_NX-OS_Nexus_Switches\" title=\"Cisco NX-OS (Nexus Switches)\">Cisco NX-OS (Nexus Switches)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Cisco_IOS-XR_Carrier_Routing_Platforms\" title=\"Cisco IOS-XR (Carrier Routing Platforms)\">Cisco IOS-XR (Carrier Routing Platforms)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Cisco_Command_Reference_show_ip_bgp_neighbors_Suite\" title=\"Cisco Command Reference: show ip bgp neighbors Suite\">Cisco Command Reference: show ip bgp neighbors Suite<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Command_Syntax\" title=\"Command Syntax\">Command Syntax<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Parameter_Reference\" title=\"Parameter Reference\">Parameter Reference<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Command_Specifications\" title=\"Command Specifications\">Command Specifications<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"BGP_Route_Inspection_received-routes_vs_routes\"><\/span>BGP Route Inspection: <code>received-routes<\/code> vs. <code>routes<\/code><span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Before issuing verification commands, it is essential to distinguish between pre-policy and post-policy BGP tables. Cisco routers process incoming network advertisements through an ingress policy pipeline, sorting entries across distinct stages of the Routing Information Base (Adj-RIB-In and Loc-RIB).<\/p>\n<p>The following comparison outlines the operational differences between the <code>received-routes<\/code> and <code>routes<\/code> keywords:<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Feature \/ Criterion<\/th>\n<th style=\"text-align: left;\"><code>show ip bgp neighbors &lt;IP&gt; received-routes<\/code><\/th>\n<th style=\"text-align: left;\"><code>show ip bgp neighbors &lt;IP&gt; routes<\/code><\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Routing Phase<\/strong><\/td>\n<td style=\"text-align: left;\"><strong>Pre-policy<\/strong> (raw inbound updates)<\/td>\n<td style=\"text-align: left;\"><strong>Post-policy<\/strong> (filtered updates)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>BGP Table Location<\/strong><\/td>\n<td style=\"text-align: left;\">Stored in the unedited Adj-RIB-In table.<\/td>\n<td style=\"text-align: left;\">Processed into the local BGP table (Loc-RIB).<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Policy Impact<\/strong><\/td>\n<td style=\"text-align: left;\">Displays routes <strong>before<\/strong> inbound route-maps, prefix-lists, or distribute-lists are applied.<\/td>\n<td style=\"text-align: left;\">Displays only routes that have <strong>passed<\/strong> all inbound policy filters.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Filtered Routes<\/strong><\/td>\n<td style=\"text-align: left;\">Visible (including denied and discarded prefixes).<\/td>\n<td style=\"text-align: left;\">Hidden (denied routes are suppressed).<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Memory Overhead<\/strong><\/td>\n<td style=\"text-align: left;\">Requires local storage of unmodified paths via soft reconfiguration.<\/td>\n<td style=\"text-align: left;\">No additional memory overhead required.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Primary Use Case<\/strong><\/td>\n<td style=\"text-align: left;\">Diagnosing whether a peer is sending a route that is being dropped by local policy.<\/td>\n<td style=\"text-align: left;\">Verifying which routes from a peer were accepted and are candidates for the routing table.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Understanding this distinction clarifies why a prefix might appear under <code>received-routes<\/code> but remain absent from <code>routes<\/code>: inbound policy rejected the prefix.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Check_Received_Routes_in_Cisco_IOS_and_IOS-XE\"><\/span>How to Check Received Routes in Cisco IOS and IOS-XE<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>In standard Cisco IOS and IOS-XE deployments, inspecting pre-policy prefixes requires querying the specific neighbor&#8217;s inbound table. Follow this step-by-step workflow to verify received advertisements.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Identify_the_Target_BGP_Neighbor\"><\/span>Step 1: Identify the Target BGP Neighbor<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Determine the operational state and IP address of your BGP neighbor:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp summary\n<\/code><\/pre>\n<p>Verify that the neighbor relationship shows an established state and displays a numeric prefix counter under the <code>State\/PfxRcd<\/code> column.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Query_Pre-Policy_Advertisements\"><\/span>Step 2: Query Pre-Policy Advertisements<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To view all raw prefixes advertised by the neighbor before inbound filters are applied, run:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp neighbors 192.0.2.1 received-routes\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Interpret_the_Command_Output\"><\/span>Step 3: Interpret the Command Output<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The output displays the BGP table entries received directly from the peer:<\/p>\n<pre><code class=\"language-text\">BGP table version is 482, local router ID is 198.51.100.1\nStatus codes: s suppressed, d damped, h history, * valid, &gt; best, i - internal,\n              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,\n              x best-external, a additional-path, c RIB-compressed,\nOrigin codes: i - IGP, e - EGP, ? - incomplete\nRPKI validation codes: V valid, I invalid, N Not found\n\n     Network          Next Hop            Metric LocPrf Weight Path\n *   10.10.0.0\/16     192.0.2.1                0             0 65001 65100 i\n *   172.16.0.0\/12    192.0.2.1                0             0 65001 ?\n<\/code><\/pre>\n<ul>\n<li><strong>Valid marker (<code>*<\/code>)<\/strong>: Confirms the router received a well-formed BGP update.<\/li>\n<li><strong>Next Hop<\/strong>: Indicates the gateway advertised by the peer.<\/li>\n<li><strong>Path<\/strong>: Displays the autonomous system path traversed before reaching your router.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Filter_Output_for_Specific_Prefixes\"><\/span>Step 4: Filter Output for Specific Prefixes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When peering with an upstream transit provider sending full internet routing tables, narrow the output to a specific prefix:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp neighbors 192.0.2.1 received-routes 10.10.0.0\/16\n<\/code><\/pre>\n<p>Alternatively, use regular expressions or pipe filters to find specific AS paths or subnets:<\/p>\n<pre><code class=\"language-text\">Router# show ip bgp neighbors 192.0.2.1 received-routes | include 10.10.\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Inbound_Soft_Reconfiguration_Not_Enabled\"><\/span>Troubleshooting: &#8220;Inbound Soft Reconfiguration Not Enabled&#8221;<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When running <code>show ip bgp neighbors &lt;IP&gt; received-routes<\/code>, Cisco IOS and IOS-XE routers often return the following error message:<\/p>\n<pre><code class=\"language-text\">% Inbound soft reconfiguration not enabled on neighbor 192.0.2.1\n<\/code><\/pre>\n<p>Below are common operational questions and solutions associated with this error.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_does_this_error_occur\"><\/span>Why does this error occur?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>By default, Cisco IOS and IOS-XE do not retain raw, pre-policy routing updates in memory. When a BGP update arrives, the router applies inbound policies (such as route-maps), places accepted routes into the BGP table, and discards the original advertisement to conserve RAM. Because the unmodified Adj-RIB-In is discarded, the router has no raw data to show when prompted for <code>received-routes<\/code>.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Does_BGP_Route_Refresh_eliminate_the_need_for_this_command\"><\/span>Does BGP Route Refresh eliminate the need for this command?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Not entirely. The BGP Route Refresh capability (RFC 2918) allows routers to request fresh routing updates dynamically from a peer using the command <code>clear ip bgp &lt;IP&gt; in<\/code>. While Route Refresh enables non-disruptive policy changes without dropping BGP sessions, it still applies filters on the fly and discards the raw input. If you need to view raw pre-policy updates at any time, inbound soft reconfiguration must be explicitly enabled.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_are_the_memory_implications_of_enabling_soft_reconfiguration\"><\/span>What are the memory implications of enabling soft reconfiguration?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enabling inbound soft reconfiguration instructs the router to store two copies of every prefix advertised by that neighbor: the pre-policy update and the accepted post-policy update. For small-to-medium peering sessions, the memory footprint is negligible. However, on edge routers receiving full internet routing tables (over 900,000 routes per peer), enabling this command can consume hundreds of megabytes of additional control-plane RAM per neighbor.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Configuration_Templates_Enabling_Inbound_Soft_Reconfiguration\"><\/span>Configuration Templates: Enabling Inbound Soft Reconfiguration<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To enable inspection of pre-policy routes, configure the <code>soft-reconfiguration inbound<\/code> parameter under the BGP process. Below are production-ready configuration snippets.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Classic_Cisco_IOS_Global_BGP_Process\"><\/span>Classic Cisco IOS (Global BGP Process)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Use this configuration for legacy Cisco IOS deployments running traditional IPv4 unicast routing:<\/p>\n<pre><code class=\"language-text\">router bgp 65000\n neighbor 192.0.2.1 remote-as 65001\n neighbor 192.0.2.1 soft-reconfiguration inbound\nend\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Cisco_IOS-XE_Address-Family_Configuration\"><\/span>Cisco IOS-XE (Address-Family Configuration)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Modern IOS-XE configurations isolate neighbors within specific address families (IPv4, IPv6, or VRF instances):<\/p>\n<pre><code class=\"language-text\">router bgp 65000\n neighbor 192.0.2.1 remote-as 65001\n !\n address-family ipv4 unicast\n  neighbor 192.0.2.1 activate\n  neighbor 192.0.2.1 soft-reconfiguration inbound\n exit-address-family\n !\n address-family ipv6 unicast\n  neighbor 2001:db8::1 remote-as 65001\n  neighbor 2001:db8::1 activate\n  neighbor 2001:db8::1 soft-reconfiguration inbound\n exit-address-family\nend\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"VRF-Aware_BGP_Template\"><\/span>VRF-Aware BGP Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For enterprise WAN and MPLS deployments utilizing Virtual Routing and Forwarding (VRF):<\/p>\n<pre><code class=\"language-text\">router bgp 65000\n address-family ipv4 vrf CUSTOMER_A\n  neighbor 10.255.1.2 remote-as 65100\n  neighbor 10.255.1.2 activate\n  neighbor 10.255.1.2 soft-reconfiguration inbound\n exit-address-family\nend\n<\/code><\/pre>\n<p><em>Note: After applying these commands, the router will store all future inbound updates from the specified neighbor. To populate the table immediately without resetting the peering session, run <code>clear ip bgp &lt;neighbor-ip&gt; in<\/code>.<\/em><\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Checking_Received_Routes_in_Cisco_NX-OS_and_IOS-XR\"><\/span>Checking Received Routes in Cisco NX-OS and IOS-XR<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Data center and carrier-grade operating systems handle BGP updates with different command syntax and default behaviors compared to standard IOS.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Cisco_NX-OS_Nexus_Switches\"><\/span>Cisco NX-OS (Nexus Switches)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco NX-OS requires explicit Address Family Identifier (AFI) keywords in its verification commands.<\/p>\n<ol>\n<li>\n<p><strong>Verify Neighbor Status:<\/strong><br \/>\n   <code>text<br \/>\n   switch# show bgp ipv4 unicast summary<\/code><\/p>\n<\/li>\n<li>\n<p><strong>Check Received Routes (Pre-Policy):<\/strong><br \/>\n   <code>text<br \/>\n   switch# show bgp ipv4 unicast neighbors 192.0.2.1 received-routes<\/code><\/p>\n<\/li>\n<li>\n<p><strong>Check Accepted Routes (Post-Policy):<\/strong><br \/>\n   <code>text<br \/>\n   switch# show bgp ipv4 unicast neighbors 192.0.2.1 routes<\/code><\/p>\n<\/li>\n<\/ol>\n<p><em>NX-OS Behavior Note:<\/em> Similar to IOS, if soft reconfiguration is not enabled, NX-OS will reject the command unless <code>soft-reconfiguration inbound always<\/code> is configured globally or on the neighbor under the BGP address family.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Cisco_IOS-XR_Carrier_Routing_Platforms\"><\/span>Cisco IOS-XR (Carrier Routing Platforms)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco IOS-XR features a modular control-plane architecture. By default, IOS-XR can store pre-policy route information when configured, but its command syntax conforms to a strict hierarchical structure:<\/p>\n<ol>\n<li>\n<p><strong>Check Received Routes (Pre-Policy):<\/strong><br \/>\n   <code>text<br \/>\n   RP\/0\/RSP0\/CPU0:Router# show bgp ipv4 unicast neighbors 192.0.2.1 received-routes<\/code><\/p>\n<\/li>\n<li>\n<p><strong>Inspect Received Routes for IPv6:<\/strong><br \/>\n   <code>text<br \/>\n   RP\/0\/RSP0\/CPU0:Router# show bgp ipv6 unicast neighbors 2001:db8::1 received-routes<\/code><\/p>\n<\/li>\n<li>\n<p><strong>Inspect Routes with Detail:<\/strong><br \/>\n   To view extended path attributes, communities, and MED for unedited received routes:<br \/>\n   <code>text<br \/>\n   RP\/0\/RSP0\/CPU0:Router# show bgp ipv4 unicast neighbors 192.0.2.1 received-routes detail<\/code><\/p>\n<\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Command_Reference_show_ip_bgp_neighbors_Suite\"><\/span>Cisco Command Reference: <code>show ip bgp neighbors<\/code> Suite<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The following reference table documents the syntax, operational modes, and parameters for the BGP verification command suite across Cisco IOS and IOS-XE platforms.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Command_Syntax\"><\/span>Command Syntax<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">show ip bgp neighbors [ip-address] [received-routes | routes | advertised-routes]\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Parameter_Reference\"><\/span>Parameter Reference<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><code>ip-address<\/code>: Specifies the IPv4 or IPv6 address of the target BGP neighbor.<\/li>\n<li><code>received-routes<\/code>: Displays all received BGP routes (pre-policy) from the specified neighbor. Requires <code>soft-reconfiguration inbound<\/code>.<\/li>\n<li><code>routes<\/code>: Displays all accepted BGP routes (post-policy) received from the specified neighbor that survived ingress filtering.<\/li>\n<li><code>advertised-routes<\/code>: Displays all BGP routes currently sent to the specified neighbor after outbound policies have been evaluated.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Command_Specifications\"><\/span>Command Specifications<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Command Mode:<\/strong> User EXEC (<code>&gt;<\/code>), Privileged EXEC (<code>#<\/code>)<\/li>\n<li><strong>Privilege Level:<\/strong> Level 1 (Read-Only)<\/li>\n<li><strong>Hardware Scope:<\/strong> Cisco ISR, ASR, Catalyst 8000\/9000, and legacy routing platforms.<\/li>\n<li><strong>Standard Dependencies:<\/strong> Peer must be in the <code>Established<\/code> state. Prefixes will only be listed under <code>received-routes<\/code> if the session was refreshed or established after <code>neighbor soft-reconfiguration inbound<\/code> was applied.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Checking received BGP routes on Cisco devices is a fundamental troubleshooting technique for resolving routing discrepancies and validating filter configurations. By using <code>received-routes<\/code>, engineers can verify the raw, pre-policy advertisements sent by an external peer, whereas <code>routes<\/code> displays what successfully passed local filtering. When working on memory-constrained devices or handling full internet routing tables, consider the RAM requirements of inbound soft reconfiguration before enabling it permanently across all peers.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-check-bgp-received-routes-in-cisco_24519.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+BGP+Received+Routes+in+Cisco+https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\",\"How to Check BGP Received Routes in Cisco\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>When troubleshooting Border Gateway Protocol (BGP) relationships on Cisco hardware, network engineers frequently need to determine whether a remote peer is advertising a specific prefix. While a route may not appear in the active BGP table or the local routing information base (RIB), it might still be arriving at the interface and getting filtered out&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check BGP Received Routes in Cisco - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check BGP Received Routes in Cisco - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"When troubleshooting Border Gateway Protocol (BGP) relationships on Cisco hardware, network engineers frequently need to determine whether a remote peer is advertising a specific prefix. While a route may not appear in the active BGP table or the local routing information base (RIB), it might still be arriving at the interface and getting filtered out... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T03:50:23+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\",\"name\":\"How to Check BGP Received Routes in Cisco - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T03:50:23+00:00\",\"dateModified\":\"2026-11-16T03:50:23+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check BGP Received Routes in Cisco\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check BGP Received Routes in Cisco\",\"datePublished\":\"2026-11-16T03:50:23+00:00\",\"dateModified\":\"2026-11-16T03:50:23+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#webpage\"},\"wordCount\":1166,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check BGP Received Routes in Cisco - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html","og_locale":"en_US","og_type":"article","og_title":"How to Check BGP Received Routes in Cisco - SPOTO Official Blog","og_description":"When troubleshooting Border Gateway Protocol (BGP) relationships on Cisco hardware, network engineers frequently need to determine whether a remote peer is advertising a specific prefix. While a route may not appear in the active BGP table or the local routing information base (RIB), it might still be arriving at the interface and getting filtered out... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T03:50:23+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html","name":"How to Check BGP Received Routes in Cisco - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T03:50:23+00:00","dateModified":"2026-11-16T03:50:23+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check BGP Received Routes in Cisco"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check BGP Received Routes in Cisco","datePublished":"2026-11-16T03:50:23+00:00","dateModified":"2026-11-16T03:50:23+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#webpage"},"wordCount":1166,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-bgp-received-routes-in-cisco_24519.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24519"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24519"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24519\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24519"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24519"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24519"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}