{"id":24505,"date":"2026-11-16T11:24:23","date_gmt":"2026-11-16T03:24:23","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html"},"modified":"2026-11-16T11:24:23","modified_gmt":"2026-11-16T03:24:23","slug":"how-to-bounce-vpn-tunnel-cisco-asa","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html","title":{"rendered":"How to Bounce VPN Tunnel Cisco ASA"},"content":{"rendered":"<p>Site-to-site and remote access VPN tunnels on Cisco Adaptive Security Appliances (ASA) can occasionally stall, experience unidirectional traffic drops, or fail to rekey properly after configuration changes. Bouncing or clearing the Security Associations (SAs) forces the firewall to tear down the cryptographic session and renegotiate security parameters. However, executing global reset commands on a production firewall risks dropping every active tunnel in the enterprise.<\/p>\n<p>Whether you manage your Cisco ASA through the command-line interface (CLI) or the Adaptive Security Device Manager (ASDM), knowing how to pinpoint and reset a single tunnel is critical for maintaining uptime. This guide covers how to clear specific IKEv1, IKEv2, and IPsec associations, navigate the ASDM graphical interface, disconnect individual remote access users, and troubleshoot tunnels that fail to recover after a bounce.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Phase_1_vs_Phase_2_When_to_Clear_ISAKMP_vs_IPsec_SAs\" title=\"Phase 1 vs. Phase 2: When to Clear ISAKMP vs. IPsec SAs\">Phase 1 vs. Phase 2: When to Clear ISAKMP vs. IPsec SAs<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#What_is_the_operational_difference_between_clearing_Phase_1_and_Phase_2\" title=\"What is the operational difference between clearing Phase 1 and Phase 2?\">What is the operational difference between clearing Phase 1 and Phase 2?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#When_should_you_clear_only_the_IPsec_SA_Phase_2\" title=\"When should you clear only the IPsec SA (Phase 2)?\">When should you clear only the IPsec SA (Phase 2)?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#When_must_you_clear_the_ISAKMP_IKE_SA_Phase_1\" title=\"When must you clear the ISAKMP \/ IKE SA (Phase 1)?\">When must you clear the ISAKMP \/ IKE SA (Phase 1)?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Resetting_IKEv1_and_IPsec_Tunnels_by_Remote_Peer_IP_CLI\" title=\"Resetting IKEv1 and IPsec Tunnels by Remote Peer IP (CLI)\">Resetting IKEv1 and IPsec Tunnels by Remote Peer IP (CLI)<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_1_Verify_the_Active_SAs\" title=\"Step 1: Verify the Active SAs\">Step 1: Verify the Active SAs<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_2_Clear_IPsec_Phase_2_Only\" title=\"Step 2: Clear IPsec (Phase 2 Only)\">Step 2: Clear IPsec (Phase 2 Only)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_3_Clear_IKEv1_Phase_1_and_Associated_Phase_2\" title=\"Step 3: Clear IKEv1 (Phase 1 and Associated Phase 2)\">Step 3: Clear IKEv1 (Phase 1 and Associated Phase 2)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_4_Alternative_Method_Using_Session_Index\" title=\"Step 4: Alternative Method Using Session Index\">Step 4: Alternative Method Using Session Index<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_5_Trigger_Re-Negotiation\" title=\"Step 5: Trigger Re-Negotiation\">Step 5: Trigger Re-Negotiation<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Bouncing_Modern_IKEv2_Site-to-Site_VPN_Tunnels_CLI\" title=\"Bouncing Modern IKEv2 Site-to-Site VPN Tunnels (CLI)\">Bouncing Modern IKEv2 Site-to-Site VPN Tunnels (CLI)<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_1_Check_Current_IKEv2_Status\" title=\"Step 1: Check Current IKEv2 Status\">Step 1: Check Current IKEv2 Status<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_2_Terminate_the_Specific_IKEv2_Peer_SA\" title=\"Step 2: Terminate the Specific IKEv2 Peer SA\">Step 2: Terminate the Specific IKEv2 Peer SA<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_3_Clear_Only_Child_IPsec_SAs_Optional\" title=\"Step 3: Clear Only Child IPsec SAs (Optional)\">Step 3: Clear Only Child IPsec SAs (Optional)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_4_Verify_and_Initiate\" title=\"Step 4: Verify and Initiate\">Step 4: Verify and Initiate<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#How_to_Reset_a_VPN_Tunnel_in_Cisco_ASDM_GUI\" title=\"How to Reset a VPN Tunnel in Cisco ASDM (GUI)\">How to Reset a VPN Tunnel in Cisco ASDM (GUI)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Disconnecting_Remote_Access_AnyConnect_SSLIPsec_Sessions\" title=\"Disconnecting Remote Access AnyConnect SSL\/IPsec Sessions\">Disconnecting Remote Access AnyConnect SSL\/IPsec Sessions<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Template_View_and_Log_Off_Specific_Remote_Access_Users\" title=\"Template: View and Log Off Specific Remote Access Users\">Template: View and Log Off Specific Remote Access Users<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Troubleshooting_Tunnels_That_Fail_to_Recover_After_a_Bounce\" title=\"Troubleshooting Tunnels That Fail to Recover After a Bounce\">Troubleshooting Tunnels That Fail to Recover After a Bounce<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_1_Verify_Traffic_Generation\" title=\"Step 1: Verify Traffic Generation\">Step 1: Verify Traffic Generation<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_2_Diagnose_Phase_1_Hangs\" title=\"Step 2: Diagnose Phase 1 Hangs\">Step 2: Diagnose Phase 1 Hangs<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_3_Diagnose_Phase_2_and_Quick_Mode_Issues\" title=\"Step 3: Diagnose Phase 2 and Quick Mode Issues\">Step 3: Diagnose Phase 2 and Quick Mode Issues<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Step_4_Run_Targeted_Non-Disruptive_Debugs\" title=\"Step 4: Run Targeted, Non-Disruptive Debugs\">Step 4: Run Targeted, Non-Disruptive Debugs<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Cisco_ASA_Crypto_Reset_Command_Reference\" title=\"Cisco ASA Crypto Reset Command Reference\">Cisco ASA Crypto Reset Command Reference<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#clear_crypto_ipsec_sa\" title=\"clear crypto ipsec sa\">clear crypto ipsec sa<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#clear_crypto_ikev1\" title=\"clear crypto ikev1\">clear crypto ikev1<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-27\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#clear_crypto_ikev2\" title=\"clear crypto ikev2\">clear crypto ikev2<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-28\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#vpn-sessiondb_logoff\" title=\"vpn-sessiondb logoff\">vpn-sessiondb logoff<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-29\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Phase_1_vs_Phase_2_When_to_Clear_ISAKMP_vs_IPsec_SAs\"><\/span>Phase 1 vs. Phase 2: When to Clear ISAKMP vs. IPsec SAs<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Before executing reset commands, you must identify whether the failure exists in the management plane negotiation (Phase 1) or the data encryption plane (Phase 2). Clearing the wrong layer can cause unnecessary renegotiation overhead or fail to resolve the underlying issue.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_is_the_operational_difference_between_clearing_Phase_1_and_Phase_2\"><\/span>What is the operational difference between clearing Phase 1 and Phase 2?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Phase 1 (ISAKMP \/ IKEv1 \/ IKEv2) is the control plane channel. It authenticates both tunnel endpoints using pre-shared keys or digital certificates, establishes a secure bidirectional management session, and exchanges keying material via Diffie-Hellman. <\/p>\n<p>Phase 2 (IPsec) is the data plane channel. It creates unidirectional Security Associations (one inbound, one outbound) using Encapsulating Security Payload (ESP) to encrypt and encapsulate actual payload traffic matching your crypto access control lists (ACLs) or traffic selectors.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"When_should_you_clear_only_the_IPsec_SA_Phase_2\"><\/span>When should you clear only the IPsec SA (Phase 2)?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>You should reset only Phase 2 when:<br \/>\n* Phase 1 is fully established (<code>MM_ACTIVE<\/code> for IKEv1 or active state for IKEv2), but traffic is stalling or passing unidirectionally.<br \/>\n* You modified a crypto access list, traffic selector, or IPsec transform set and need existing tunnels to renegotiate encryption domains without re-authenticating the peer.<br \/>\n* Encrypted packet counters (<code>encaps<\/code>) are incrementing, but decrypted packet counters (<code>decaps<\/code>) remain flat at zero.<\/p>\n<p>Clearing Phase 2 renegotiates Quick Mode (IKEv1) or <code>CREATE_CHILD_SA<\/code> (IKEv2) over the existing, verified management channel. This is fast, non-disruptive to the control plane, and completes in milliseconds.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"When_must_you_clear_the_ISAKMP_IKE_SA_Phase_1\"><\/span>When must you clear the ISAKMP \/ IKE SA (Phase 1)?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>You must reset Phase 1 when:<br \/>\n* Pre-shared keys, authentication certificates, or Phase 1 policy parameters (encryption, hashing, DH group) have been updated on either endpoint.<br \/>\n* Dead Peer Detection (DPD) has timed out, leaving an orphan SA in the local database.<br \/>\n* The tunnel is stuck in an intermediate negotiation state (such as <code>MM_WAIT_MSG2<\/code> or <code>MM_WAIT_MSG6<\/code>).<br \/>\n* A peer device rebooted or crashed, leaving stale Phase 1 state records on the ASA.<\/p>\n<p><em>Note:<\/em> Tearing down Phase 1 automatically destroys all associated child Phase 2 IPsec SAs. Once Phase 1 is cleared, the entire tunnel renegotiates from scratch.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Resetting_IKEv1_and_IPsec_Tunnels_by_Remote_Peer_IP_CLI\"><\/span>Resetting IKEv1 and IPsec Tunnels by Remote Peer IP (CLI)<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To restart an IKEv1 site-to-site tunnel without disrupting other active tunnels on the firewall, always append the remote peer&#8217;s public IP address to your command. Running <code>clear crypto isakmp sa<\/code> without an argument drops <strong>all<\/strong> IKEv1 tunnels on the ASA.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Verify_the_Active_SAs\"><\/span>Step 1: Verify the Active SAs<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">ciscoasa# show crypto isakmp sa\nciscoasa# show crypto ipsec sa peer &lt;REMOTE_PEER_IP&gt;\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Clear_IPsec_Phase_2_Only\"><\/span>Step 2: Clear IPsec (Phase 2 Only)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To reset data plane security associations while keeping Phase 1 intact:<\/p>\n<pre><code class=\"language-text\">ciscoasa# clear crypto ipsec sa peer &lt;REMOTE_PEER_IP&gt;\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Clear_IKEv1_Phase_1_and_Associated_Phase_2\"><\/span>Step 3: Clear IKEv1 (Phase 1 and Associated Phase 2)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To tear down the entire tunnel (Phase 1 and Phase 2) for a specific peer:<\/p>\n<pre><code class=\"language-text\">ciscoasa# clear crypto ikev1 sa peer &lt;REMOTE_PEER_IP&gt;\n<\/code><\/pre>\n<p><em>(On legacy ASA software releases prior to 8.4, use <code>vpn-sessiondb logoff tunnel-group &lt;REMOTE_PEER_IP&gt;<\/code> or <code>clear crypto isakmp sa &lt;REMOTE_PEER_IP&gt;<\/code> if supported by the platform build.)<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Alternative_Method_Using_Session_Index\"><\/span>Step 4: Alternative Method Using Session Index<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If the tunnel refuses to clear by peer IP, terminate it directly from the VPN session database:<\/p>\n<pre><code class=\"language-text\">ciscoasa# show vpn-sessiondb l2l filter ipaddress &lt;REMOTE_PEER_IP&gt;\n! Locate the Index number from the output (e.g., Index : 14205)\nciscoasa# vpn-sessiondb logoff index &lt;INDEX_NUMBER&gt;\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Trigger_Re-Negotiation\"><\/span>Step 5: Trigger Re-Negotiation<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Because Cisco ASA negotiates policy-based IPsec on demand, send interesting traffic across the tunnel to bring it back up:<\/p>\n<pre><code class=\"language-text\">ciscoasa# ping &lt;LOCAL_INTERFACE_NAME&gt; &lt;REMOTE_INTERNAL_IP&gt;\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Bouncing_Modern_IKEv2_Site-to-Site_VPN_Tunnels_CLI\"><\/span>Bouncing Modern IKEv2 Site-to-Site VPN Tunnels (CLI)<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>IKEv2 features separate command structures from legacy ISAKMP. Resetting an IKEv2 security association targets the management channel and immediately clears any associated child SAs.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Check_Current_IKEv2_Status\"><\/span>Step 1: Check Current IKEv2 Status<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">ciscoasa# show crypto ikev2 sa\nciscoasa# show crypto ikev2 sa detail\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Terminate_the_Specific_IKEv2_Peer_SA\"><\/span>Step 2: Terminate the Specific IKEv2 Peer SA<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">ciscoasa# clear crypto ikev2 sa peer &lt;REMOTE_PEER_IP&gt;\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Clear_Only_Child_IPsec_SAs_Optional\"><\/span>Step 3: Clear Only Child IPsec SAs (Optional)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If IKEv2 is stable and you only want to force Phase 2 re-keying:<\/p>\n<pre><code class=\"language-text\">ciscoasa# clear crypto ipsec sa peer &lt;REMOTE_PEER_IP&gt;\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Verify_and_Initiate\"><\/span>Step 4: Verify and Initiate<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">! Monitor the re-establishment\nciscoasa# show crypto ikev2 sa\nciscoasa# show crypto ipsec sa peer &lt;REMOTE_PEER_IP&gt;\n\n! Force tunnel initiation via packet tracer if no host is generating traffic\nciscoasa# packet-tracer input &lt;INSIDE_INTERFACE&gt; icmp &lt;LOCAL_INTERNAL_IP&gt; 8 0 &lt;REMOTE_INTERNAL_IP&gt;\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Reset_a_VPN_Tunnel_in_Cisco_ASDM_GUI\"><\/span>How to Reset a VPN Tunnel in Cisco ASDM (GUI)<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>If you prefer using the Cisco Adaptive Security Device Manager (ASDM) graphical interface, you can locate and disconnect any active LAN-to-LAN tunnel with a few clicks.<\/p>\n<ol>\n<li><strong>Log in to ASDM:<\/strong> Launch the ASDM client and authenticate to your ASA with administrative credentials.<\/li>\n<li><strong>Access the Monitoring Pane:<\/strong> In the top navigation bar, click on <strong>Monitoring<\/strong>.<\/li>\n<li><strong>Navigate to Sessions:<\/strong> In the left-hand menu tree, expand <strong>VPN<\/strong> &gt; <strong>VPN Statistics<\/strong>, and select <strong>Sessions<\/strong>.<\/li>\n<li><strong>Filter by Connection Type:<\/strong> In the main panel, locate the <strong>Filter by<\/strong> drop-down menu on the right and select <strong>IPsec Site-to-Site<\/strong> (or <strong>IPsec LAN-to-LAN<\/strong> depending on your ASDM version).<\/li>\n<li><strong>Locate the Tunnel:<\/strong> Review the active session list for the remote gateway&#8217;s public IP address or configured Tunnel Group name.<\/li>\n<li><strong>Terminate the Session:<\/strong> Click on the target tunnel row to highlight it, then click the <strong>Logout<\/strong> button at the bottom right of the pane.<\/li>\n<li><strong>Confirm Termination:<\/strong> When prompted with the confirmation dialog, click <strong>OK<\/strong> to disconnect the session.<\/li>\n<li><strong>Verify Status:<\/strong> Click <strong>Refresh<\/strong> to verify the tunnel has been cleared from active sessions. Generate interesting traffic through the tunnel or use ASDM\u2019s Packet Tracer tool (<strong>Tools<\/strong> &gt; <strong>Packet Tracer<\/strong>) to trigger renegotiation.<\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Disconnecting_Remote_Access_AnyConnect_SSLIPsec_Sessions\"><\/span>Disconnecting Remote Access AnyConnect SSL\/IPsec Sessions<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Remote access VPNs running Cisco Secure Client (AnyConnect) operate through the ASA\u2019s WebVPN\/SSL and IKEv2 remote access database. They cannot be bounced using standard <code>clear crypto ipsec sa<\/code> commands. Instead, use the session database management utilities.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Template_View_and_Log_Off_Specific_Remote_Access_Users\"><\/span>Template: View and Log Off Specific Remote Access Users<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">! Step 1: Locate the user session and session index\nciscoasa# show vpn-sessiondb anyconnect filter name &lt;USERNAME&gt;\n\n! Step 2: Log off the user by username\nciscoasa# vpn-sessiondb logoff name &lt;USERNAME&gt;\n\n! Step 3: Alternatively, log off the user by session index\nciscoasa# vpn-sessiondb logoff index &lt;SESSION_INDEX&gt;\n\n! Step 4: Disconnect all users tied to a specific tunnel group\/connection profile\nciscoasa# vpn-sessiondb logoff tunnel-group &lt;TUNNEL_GROUP_NAME&gt;\n\n! Step 5: Verify user termination\nciscoasa# show vpn-sessiondb anyconnect filter name &lt;USERNAME&gt;\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Tunnels_That_Fail_to_Recover_After_a_Bounce\"><\/span>Troubleshooting Tunnels That Fail to Recover After a Bounce<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When a cleared tunnel remains down, it is typically caught in an asymmetric routing loop, an access-list mismatch, or a negotiation failure. Follow this sequential troubleshooting workflow to pinpoint the root cause.<\/p>\n<pre><code>+----------------------------------------------------------------+\n|                 Tunnel Down After SA Clear                     |\n+----------------------------------------------------------------+\n                               |\n                               v\n             [ Did you send Interesting Traffic? ]\n                               |\n            +------------------+------------------+\n            | No                                  | Yes\n            v                                     v\n  [ Send ping from host or           [ Check Phase 1 State ]\n    run packet-tracer ]              ciscoasa# show crypto isakmp sa\n                                     ciscoasa# show crypto ikev2 sa\n                                                  |\n                    +-----------------------------+-----------------------------+\n                    |                                                           |\n                    v                                                           v\n       [ Phase 1 Down \/ Incomplete ]                                  [ Phase 1 Up \/ Active ]\n         MM_WAIT_MSG2 \/ MSG3 \/ MSG6                                     MM_ACTIVE \/ IKEv2 Up\n                    |                                                           |\n                    v                                                           v\n     1. Verify UDP 500 \/ 4500 reachability.                       [ Check Phase 2 (IPsec) ]\n     2. Confirm Pre-Shared Key (PSK).                            ciscoasa# show crypto ipsec sa\n     3. Check IKE proposals (AES\/SHA\/DH).                                       |\n                                                  +-----------------------------+-----------------------------+\n                                                  |                                                           |\n                                                  v                                                           v\n                                     [ QM_IDLE \/ Incomplete ]                                    [ Encaps &gt; 0, Decaps = 0 ]\n                                                  |                                                           |\n                                                  v                                                           v\n                                   1. Compare Crypto ACLs (Proxy IDs).                         1. Check upstream NAT \/ ESP drops.\n                                   2. Verify Transform-Set \/ Proposal.                         2. Verify remote routing table.\n                                   3. Confirm NAT Exemption (Identity NAT).                    3. Check reverse path filtering (RPF).\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Verify_Traffic_Generation\"><\/span>Step 1: Verify Traffic Generation<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco ASA does not bring up a policy-based IPsec tunnel automatically after a reset unless data traffic matches the crypto map.<br \/>\n* Ping a remote host sourced from an interface on the local protected subnet:<br \/>\n  <code>text<br \/>\n  ciscoasa# ping inside &lt;REMOTE_INTERNAL_IP&gt;<\/code><br \/>\n* Alternatively, simulate the packet using the ASA packet-tracer utility:<br \/>\n  <code>text<br \/>\n  ciscoasa# packet-tracer input inside tcp &lt;LOCAL_INTERNAL_IP&gt; 1025 &lt;REMOTE_INTERNAL_IP&gt; 443<\/code><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Diagnose_Phase_1_Hangs\"><\/span>Step 2: Diagnose Phase 1 Hangs<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Run <code>show crypto isakmp sa<\/code> (or <code>show crypto ikev2 sa<\/code>) and analyze the state:<br \/>\n* <strong><code>MM_WAIT_MSG2<\/code> or <code>MM_WAIT_MSG3<\/code>:<\/strong> The ASA sent its initial proposal but received no reply. Check network path reachability, upstream ISP firewall rules blocking UDP port 500\/4500, or Phase 1 policy mismatches (encryption, hash, or authentication method).<br \/>\n* <strong><code>MM_WAIT_MSG5<\/code> or <code>MM_WAIT_MSG6<\/code>:<\/strong> Authentication failed. The peers exchanged identities, but validation stalled. Re-verify the pre-shared key on both firewalls:<br \/>\n  <code>text<br \/>\n  ciscoasa# show run tunnel-group &lt;REMOTE_PEER_IP&gt;<\/code><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Diagnose_Phase_2_and_Quick_Mode_Issues\"><\/span>Step 3: Diagnose Phase 2 and Quick Mode Issues<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If Phase 1 reaches <code>MM_ACTIVE<\/code> but the tunnel drops packets, check Phase 2:<br \/>\n* <strong>Crypto ACL (Proxy ID \/ Traffic Selector) Mismatch:<\/strong> The local access list defining interesting traffic must perfectly mirror the remote peer&#8217;s crypto access list.<br \/>\n  <code>text<br \/>\n  ciscoasa# show run access-list &lt;CRYPTO_ACL_NAME&gt;<\/code><br \/>\n* <strong>NAT Exemption (Identity NAT) Bypassed:<\/strong> Ensure traffic destined for the remote VPN subnet is not being translated by your global internet PAT rule. The identity NAT rule must sit above dynamic PAT rules:<br \/>\n  <code>text<br \/>\n  ciscoasa# show nat<\/code><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Run_Targeted_Non-Disruptive_Debugs\"><\/span>Step 4: Run Targeted, Non-Disruptive Debugs<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Never run unconstrained debugs on a busy production firewall. Constrain the debug engine to the single peer IP address:<\/p>\n<pre><code class=\"language-text\">ciscoasa# debug crypto condition peer &lt;REMOTE_PEER_IP&gt;\nciscoasa# debug crypto ikev1 127\nciscoasa# debug crypto ipsec 127\n! After observing negotiation:\nciscoasa# undebug all\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_ASA_Crypto_Reset_Command_Reference\"><\/span>Cisco ASA Crypto Reset Command Reference<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The following reference documents the formal command syntax, operational modes, and parameter descriptions for session maintenance commands defined in the Cisco Secure Firewall ASA Series Command Reference.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"clear_crypto_ipsec_sa\"><\/span><code>clear crypto ipsec sa<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Deletes active IPsec (Phase 2) Security Associations and flushes encryption keys for specified or all data plane tunnels.<\/p>\n<ul>\n<li><strong>Command Mode:<\/strong> Privileged EXEC (<code>ciscoasa#<\/code>)<\/li>\n<li><strong>Syntax:<\/strong><br \/>\n  <code>text<br \/>\n  clear crypto ipsec sa [counters | entry &lt;dest_ip&gt; &lt;protocol&gt; &lt;spi&gt; | map &lt;map_name&gt; | peer &lt;peer_ip&gt;]<\/code><\/li>\n<li><strong>Parameters:<\/strong><\/li>\n<li><code>peer &lt;peer_ip&gt;<\/code>: <em>(Recommended)<\/em> Deletes IPsec SAs established with the specified remote peer address without impacting other tunnels.<\/li>\n<li><code>map &lt;map_name&gt;<\/code>: Deletes SAs associated with a specific crypto map name.<\/li>\n<li><code>entry &lt;dest_ip&gt; &lt;protocol&gt; &lt;spi&gt;<\/code>: Deletes a specific SA entry identified by destination IP, protocol (ESP\/AH), and Security Parameter Index (SPI).<\/li>\n<li><code>counters<\/code>: Resets packet and byte counters for IPsec SAs without dropping active connections.<\/li>\n<li><em>(No parameters)<\/em>: <strong>CAUTION.<\/strong> Deletes all active IPsec SAs across the entire firewall.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"clear_crypto_ikev1\"><\/span><code>clear crypto ikev1<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Terminates and resets Phase 1 Internet Key Exchange Version 1 (ISAKMP) management sessions.<\/p>\n<ul>\n<li><strong>Command Mode:<\/strong> Privileged EXEC (<code>ciscoasa#<\/code>)<\/li>\n<li><strong>Syntax:<\/strong><br \/>\n  <code>text<br \/>\n  clear crypto ikev1 {sa [peer &lt;peer_ip&gt;] | stats}<\/code><\/li>\n<li><strong>Parameters:<\/strong><\/li>\n<li><code>sa peer &lt;peer_ip&gt;<\/code>: Deletes the IKEv1 SA for the designated peer and tears down associated Phase 2 child SAs.<\/li>\n<li><code>stats<\/code>: Resets IKEv1 negotiation statistics to zero.<\/li>\n<li><code>sa<\/code>: <em>(Without arguments)<\/em> <strong>CAUTION.<\/strong> Clears all active IKEv1 Phase 1 SAs on the firewall.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"clear_crypto_ikev2\"><\/span><code>clear crypto ikev2<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Terminates active Internet Key Exchange Version 2 sessions and statistics.<\/p>\n<ul>\n<li><strong>Command Mode:<\/strong> Privileged EXEC (<code>ciscoasa#<\/code>)<\/li>\n<li><strong>Syntax:<\/strong><br \/>\n  <code>text<br \/>\n  clear crypto ikev2 {sa [peer &lt;peer_ip&gt;] | stats}<\/code><\/li>\n<li><strong>Parameters:<\/strong><\/li>\n<li><code>sa peer &lt;peer_ip&gt;<\/code>: Terminates the IKEv2 control channel for the specified remote endpoint.<\/li>\n<li><code>stats<\/code>: Clears all runtime IKEv2 statistical counters.<\/li>\n<li><code>sa<\/code>: <em>(Without arguments)<\/em> <strong>CAUTION.<\/strong> Drops every active IKEv2 session on the firewall.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"vpn-sessiondb_logoff\"><\/span><code>vpn-sessiondb logoff<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Terminates active VPN sessions from the unified session database across LAN-to-LAN, AnyConnect, and clientless sessions.<\/p>\n<ul>\n<li><strong>Command Mode:<\/strong> Privileged EXEC (<code>ciscoasa#<\/code>)<\/li>\n<li><strong>Syntax:<\/strong><br \/>\n  <code>text<br \/>\n  vpn-sessiondb logoff {all | anyconnect | index &lt;index_num&gt; | l2l | name &lt;username&gt; | protocol &lt;protocol&gt; | tunnel-group &lt;group_name&gt;}<\/code><\/li>\n<li><strong>Parameters:<\/strong><\/li>\n<li><code>index &lt;index_num&gt;<\/code>: Terminates the specific VPN session identified by its database index ID.<\/li>\n<li><code>name &lt;username&gt;<\/code>: Terminates all active sessions for the specified authenticated username.<\/li>\n<li><code>tunnel-group &lt;group_name&gt;<\/code>: Logs off all sessions associated with the specified connection profile or peer IP.<\/li>\n<li><code>l2l<\/code>: Terminates all active LAN-to-LAN IPsec tunnels.<\/li>\n<li><code>all<\/code>: <strong>CAUTION.<\/strong> Disconnects every active VPN session on the appliance.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Bouncing a VPN tunnel on a Cisco ASA is an effective way to resolve stalled encryption states, force re-authentication, or apply updated security policies. However, executing unconstrained global clear commands can turn a single-tunnel troubleshooting task into an enterprise-wide network outage. By targeting your commands using the remote peer&#8217;s IP address (<code>clear crypto ipsec sa peer<\/code> or <code>clear crypto ikev2 sa peer<\/code>), leveraging <code>vpn-sessiondb logoff index<\/code>, or using ASDM&#8217;s session logout interface, you can isolate and recover individual site-to-site and AnyConnect sessions with minimal disruption.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-bounce-vpn-tunnel-cisco-asa_24505.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Bounce+VPN+Tunnel+Cisco+ASA+https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\",\"How to Bounce VPN Tunnel Cisco ASA\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Site-to-site and remote access VPN tunnels on Cisco Adaptive Security Appliances (ASA) can occasionally stall, experience unidirectional traffic drops, or fail to rekey properly after configuration changes. Bouncing or clearing the Security Associations (SAs) forces the firewall to tear down the cryptographic session and renegotiate security parameters. However, executing global reset commands on a production&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Bounce VPN Tunnel Cisco ASA - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Bounce VPN Tunnel Cisco ASA - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Site-to-site and remote access VPN tunnels on Cisco Adaptive Security Appliances (ASA) can occasionally stall, experience unidirectional traffic drops, or fail to rekey properly after configuration changes. Bouncing or clearing the Security Associations (SAs) forces the firewall to tear down the cryptographic session and renegotiate security parameters. However, executing global reset commands on a production... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T03:24:23+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\",\"name\":\"How to Bounce VPN Tunnel Cisco ASA - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T03:24:23+00:00\",\"dateModified\":\"2026-11-16T03:24:23+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Bounce VPN Tunnel Cisco ASA\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Bounce VPN Tunnel Cisco ASA\",\"datePublished\":\"2026-11-16T03:24:23+00:00\",\"dateModified\":\"2026-11-16T03:24:23+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#webpage\"},\"wordCount\":1516,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Bounce VPN Tunnel Cisco ASA - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html","og_locale":"en_US","og_type":"article","og_title":"How to Bounce VPN Tunnel Cisco ASA - SPOTO Official Blog","og_description":"Site-to-site and remote access VPN tunnels on Cisco Adaptive Security Appliances (ASA) can occasionally stall, experience unidirectional traffic drops, or fail to rekey properly after configuration changes. Bouncing or clearing the Security Associations (SAs) forces the firewall to tear down the cryptographic session and renegotiate security parameters. However, executing global reset commands on a production... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T03:24:23+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html","name":"How to Bounce VPN Tunnel Cisco ASA - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T03:24:23+00:00","dateModified":"2026-11-16T03:24:23+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Bounce VPN Tunnel Cisco ASA"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Bounce VPN Tunnel Cisco ASA","datePublished":"2026-11-16T03:24:23+00:00","dateModified":"2026-11-16T03:24:23+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#webpage"},"wordCount":1516,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-bounce-vpn-tunnel-cisco-asa_24505.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24505"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24505"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24505\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24505"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24505"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24505"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}