{"id":24502,"date":"2026-11-16T11:19:16","date_gmt":"2026-11-16T03:19:16","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html"},"modified":"2026-11-16T11:19:16","modified_gmt":"2026-11-16T03:19:16","slug":"how-to-block-mac-address-in-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html","title":{"rendered":"How to Block MAC Address in Cisco Switch"},"content":{"rendered":"<p>Whether isolating an infected host, stopping an unauthorized device from accessing sensitive subnets, or mitigating Layer 2 attacks like ARP spoofing, blocking traffic by Media Access Control (MAC) address is a core operational task for network administrators. Cisco IOS and Cisco IOS-XE switches provide multiple native mechanisms to discard or filter frames based on hardware addresses. <\/p>\n<p>Depending on your network topology and security goals, you can enforce MAC-level blocks globally within a broadcast domain, at specific physical ingress ports, or proactively through dynamic port security. Understanding the distinct operational characteristics of each method ensures you choose the right approach without disrupting legitimate traffic or exhausting switch hardware resources.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Evaluating_Layer_2_MAC_Blocking_Methods_Comparison_and_Trade-Offs\" title=\"Evaluating Layer 2 MAC Blocking Methods: Comparison and Trade-Offs\">Evaluating Layer 2 MAC Blocking Methods: Comparison and Trade-Offs<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Selecting_the_Optimal_Method\" title=\"Selecting the Optimal Method\">Selecting the Optimal Method<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Dropping_a_Specific_MAC_Address_with_Static_MAC_Table_Entries\" title=\"Dropping a Specific MAC Address with Static MAC Table Entries\">Dropping a Specific MAC Address with Static MAC Table Entries<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_1_Identify_the_Offending_MAC_Address_and_VLAN\" title=\"Step 1: Identify the Offending MAC Address and VLAN\">Step 1: Identify the Offending MAC Address and VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_2_Access_Global_Configuration_Mode\" title=\"Step 2: Access Global Configuration Mode\">Step 2: Access Global Configuration Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_3_Apply_the_Static_Drop_Command\" title=\"Step 3: Apply the Static Drop Command\">Step 3: Apply the Static Drop Command<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_4_Verify_Hardware_Table_Enforcement\" title=\"Step 4: Verify Hardware Table Enforcement\">Step 4: Verify Hardware Table Enforcement<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_5_Save_the_Running_Configuration\" title=\"Step 5: Save the Running Configuration\">Step 5: Save the Running Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Blocking_MAC_Addresses_Using_Layer_2_MAC_Access-Lists\" title=\"Blocking MAC Addresses Using Layer 2 MAC Access-Lists\">Blocking MAC Addresses Using Layer 2 MAC Access-Lists<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Single_Host_Block_Template\" title=\"Single Host Block Template\">Single Host Block Template<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Multi-Host_and_Vendor_OUI_Filtering_Template\" title=\"Multi-Host and Vendor OUI Filtering Template\">Multi-Host and Vendor OUI Filtering Template<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Enforcing_Port-Level_Access_Restrictions_with_Cisco_Port_Security\" title=\"Enforcing Port-Level Access Restrictions with Cisco Port Security\">Enforcing Port-Level Access Restrictions with Cisco Port Security<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_1_Configure_the_Target_Interface_as_an_Access_Port\" title=\"Step 1: Configure the Target Interface as an Access Port\">Step 1: Configure the Target Interface as an Access Port<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_2_Enable_Port_Security_and_Define_Capacity\" title=\"Step 2: Enable Port Security and Define Capacity\">Step 2: Enable Port Security and Define Capacity<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_3_Select_and_Apply_a_Violation_Mode\" title=\"Step 3: Select and Apply a Violation Mode\">Step 3: Select and Apply a Violation Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Step_4_Specify_Allowed_MAC_Addresses\" title=\"Step 4: Specify Allowed MAC Addresses\">Step 4: Specify Allowed MAC Addresses<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Verification_and_Unblocking_Frequently_Asked_Questions\" title=\"Verification and Unblocking: Frequently Asked Questions\">Verification and Unblocking: Frequently Asked Questions<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#How_do_I_view_and_verify_active_static_drop_entries\" title=\"How do I view and verify active static drop entries?\">How do I view and verify active static drop entries?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#How_do_I_remove_a_static_drop_entry_and_unblock_the_device\" title=\"How do I remove a static drop entry and unblock the device?\">How do I remove a static drop entry and unblock the device?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#How_do_I_verify_if_a_MAC_ACL_is_active_and_dropping_frames\" title=\"How do I verify if a MAC ACL is active and dropping frames?\">How do I verify if a MAC ACL is active and dropping frames?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#How_do_I_recover_a_port_placed_into_an_err-disabled_state_by_Port_Security\" title=\"How do I recover a port placed into an err-disabled state by Port Security?\">How do I recover a port placed into an err-disabled state by Port Security?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Cisco_Catalyst_Platform_Specifications_and_Architecture_Reference\" title=\"Cisco Catalyst Platform Specifications and Architecture Reference\">Cisco Catalyst Platform Specifications and Architecture Reference<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Command_Syntax_Differences_by_OS\" title=\"Command Syntax Differences by OS\">Command Syntax Differences by OS<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Hardware_TCAM_Allocation\" title=\"Hardware TCAM Allocation\">Hardware TCAM Allocation<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Topology_and_Interface_Boundaries\" title=\"Topology and Interface Boundaries\">Topology and Interface Boundaries<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\/#Official_Technical_Resources\" title=\"Official Technical Resources\">Official Technical Resources<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Evaluating_Layer_2_MAC_Blocking_Methods_Comparison_and_Trade-Offs\"><\/span>Evaluating Layer 2 MAC Blocking Methods: Comparison and Trade-Offs<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Cisco Catalyst switches process Layer 2 frame forwarding through hardware Application-Specific Integrated Circuits (ASICs) and Content Addressable Memory (CAM) tables. Choosing the correct blocking method depends on whether you require an immediate reactive quarantine, fine-grained interface filtering, or proactive edge perimeter defense.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Method<\/th>\n<th style=\"text-align: left;\">Filtering Scope<\/th>\n<th style=\"text-align: left;\">Enforcement Mechanism<\/th>\n<th style=\"text-align: left;\">Hardware Resource Usage<\/th>\n<th style=\"text-align: left;\">Primary Use Case<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Static MAC Table Drop<\/strong><\/td>\n<td style=\"text-align: left;\">Broadcast Domain (VLAN)<\/td>\n<td style=\"text-align: left;\">Replaces dynamic CAM entry with a static drop target; discards frames matching source or destination MAC.<\/td>\n<td style=\"text-align: left;\">CAM \/ MAC Address Table<\/td>\n<td style=\"text-align: left;\">Emergency network-wide blackholing of a specific rogue hardware address.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Layer 2 MAC Access-List (PACL)<\/strong><\/td>\n<td style=\"text-align: left;\">Physical Port or EtherChannel<\/td>\n<td style=\"text-align: left;\">Inspects frame headers against defined access control entries (ACEs) on ingress.<\/td>\n<td style=\"text-align: left;\">Ternary CAM (TCAM)<\/td>\n<td style=\"text-align: left;\">Granular filtering on shared uplinks or access ports (blocking specific addresses while permitting others).<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Cisco Port Security<\/strong><\/td>\n<td style=\"text-align: left;\">Access or Trunk Port<\/td>\n<td style=\"text-align: left;\">Whitelists allowed MAC addresses per port; triggers violation action when unauthorized MAC is detected.<\/td>\n<td style=\"text-align: left;\">Port Security Hardware Table \/ Port Registers<\/td>\n<td style=\"text-align: left;\">Edge defense against rogue endpoints, unauthorized switches, or MAC flooding attacks.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3><span class=\"ez-toc-section\" id=\"Selecting_the_Optimal_Method\"><\/span>Selecting the Optimal Method<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>Use <strong>Static MAC Table Drop<\/strong> when a rogue device is actively communicating across multiple switchports in the same VLAN and you need an instantaneous, switch-wide blackhole.<\/li>\n<li>Use <strong>Layer 2 MAC Access-Lists<\/strong> when you need rule-based filtering applied selectively to specific interface boundaries without altering port state.<\/li>\n<li>Use <strong>Port Security<\/strong> when hardening access-layer ports against unknown devices plugging into wall jacks.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Dropping_a_Specific_MAC_Address_with_Static_MAC_Table_Entries\"><\/span>Dropping a Specific MAC Address with Static MAC Table Entries<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The static MAC address drop command instructs the switch forwarding engine to discard all Layer 2 frames associated with a target hardware address in a designated VLAN. This action prevents the switch from forwarding frames sourced from or destined to that device.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Identify_the_Offending_MAC_Address_and_VLAN\"><\/span>Step 1: Identify the Offending MAC Address and VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Obtain the target device&#8217;s 48-bit hardware address formatted in standard Cisco dot-notation (<code>hhhh.hhhh.hhhh<\/code>) and verify the active VLAN where the device resides:<\/p>\n<pre><code class=\"language-text\">Switch# show mac address-table address 0011.2233.4455\n          Mac Address Table\n-------------------------------------------\nVlan    Mac Address       Type        Ports\n----    -----------       --------    -----\n  10    0011.2233.4455    DYNAMIC     Gi1\/0\/12\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Access_Global_Configuration_Mode\"><\/span>Step 2: Access Global Configuration Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enter privileged configuration mode on the switch:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nEnter configuration commands, one per line.  End with CNTL\/Z.\nSwitch(config)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Apply_the_Static_Drop_Command\"><\/span>Step 3: Apply the Static Drop Command<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Execute the static entry command, appending the <code>drop<\/code> keyword to designate the address for immediate discard:<\/p>\n<pre><code class=\"language-text\">Switch(config)# mac address-table static 0011.2233.4455 vlan 10 drop\n<\/code><\/pre>\n<p><em>(Note: On legacy Cisco Catalyst software versions prior to Cisco IOS 12.2, the command uses a hyphen: <code>mac-address-table static 0011.2233.4455 vlan 10 drop<\/code>.)<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Verify_Hardware_Table_Enforcement\"><\/span>Step 4: Verify Hardware Table Enforcement<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Confirm that the entry was converted from a dynamic learning state to a static drop entry:<\/p>\n<pre><code class=\"language-text\">Switch(config)# end\nSwitch# show mac address-table static vlan 10\n          Mac Address Table\n-------------------------------------------\nVlan    Mac Address       Type        Ports\n----    -----------       --------    -----\n  10    0011.2233.4455    STATIC      Drop\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Save_the_Running_Configuration\"><\/span>Step 5: Save the Running Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Commit your changes to non-volatile memory:<\/p>\n<pre><code class=\"language-text\">Switch# copy running-config startup-config\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Blocking_MAC_Addresses_Using_Layer_2_MAC_Access-Lists\"><\/span>Blocking MAC Addresses Using Layer 2 MAC Access-Lists<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For interface-level filtering that does not alter global CAM table behavior across an entire VLAN, implement a Port Access Control List (PACL). A MAC access-list filters frames at interface ingress before forwarding decisions occur.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Single_Host_Block_Template\"><\/span>Single Host Block Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">! Step 1: Define the named MAC access-list\nmac access-list extended ACL_BLOCK_ROGUE_MAC\n deny   host 0011.2233.4455 any\n permit any any\n\n! Step 2: Bind the access-list to the target interface\ninterface GigabitEthernet1\/0\/12\n mac access-group ACL_BLOCK_ROGUE_MAC in\n exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Multi-Host_and_Vendor_OUI_Filtering_Template\"><\/span>Multi-Host and Vendor OUI Filtering Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">! Block multiple specific MACs and an entire vendor OUI (using wildcard mask)\nmac access-list extended ACL_BLOCK_MULTIPLE_HOSTS\n deny   host aaaa.bbbb.cccc any\n deny   host 1111.2222.3333 any\n deny   0050.5600.0000 0000.00ff.ffff any\n permit any any\n\ninterface GigabitEthernet1\/0\/14\n mac access-group ACL_BLOCK_MULTIPLE_HOSTS in\n exit\n<\/code><\/pre>\n<p><em>Configuration Notes:<\/em><br \/>\n* Every Cisco MAC access-list contains an implicit <code>deny any any<\/code> rule at the end. You must append an explicit <code>permit any any<\/code> statement to prevent unintended disruption of all other Layer 2 traffic.<br \/>\n* Standard MAC ACLs evaluate only source MAC addresses; extended MAC ACLs evaluate both source and destination addresses as well as EtherType values.<br \/>\n* Binding is executed on the interface level using the <code>mac access-group [ACL_NAME] in<\/code> command. Cisco Catalyst switches enforce PACLs exclusively in the inbound (<code>in<\/code>) direction.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Enforcing_Port-Level_Access_Restrictions_with_Cisco_Port_Security\"><\/span>Enforcing Port-Level Access Restrictions with Cisco Port Security<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Cisco Port Security protects edge access interfaces by limiting the hardware addresses permitted on a port. If an unapproved device connects, the switch enforces a predefined violation policy.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Configure_the_Target_Interface_as_an_Access_Port\"><\/span>Step 1: Configure the Target Interface as an Access Port<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Port security cannot run on dynamic switchports; you must explicitly define the interface as a static access port:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# interface GigabitEthernet1\/0\/5\nSwitch(config-if)# switchport mode access\nSwitch(config-if)# switchport access vlan 20\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Enable_Port_Security_and_Define_Capacity\"><\/span>Step 2: Enable Port Security and Define Capacity<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Activate the feature and set the maximum number of allowable MAC addresses (default is 1):<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport port-security\nSwitch(config-if)# switchport port-security maximum 1\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Select_and_Apply_a_Violation_Mode\"><\/span>Step 3: Select and Apply a Violation Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Choose an enforcement mode based on the desired level of isolation:<\/p>\n<ul>\n<li><strong>Protect:<\/strong> Drops frames from unauthorized MAC addresses silently. Does not generate syslog messages or disable the port.<\/li>\n<li><strong>Restrict:<\/strong> Drops frames from unauthorized MAC addresses, increments the security violation counter, and generates an SNMP trap and syslog message.<\/li>\n<li><strong>Shutdown (Default):<\/strong> Immediately transitions the interface into an <code>err-disabled<\/code> state, disables the physical link, and sends an alert.<\/li>\n<\/ul>\n<pre><code class=\"language-text\">Switch(config-if)# switchport port-security violation restrict\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Specify_Allowed_MAC_Addresses\"><\/span>Step 4: Specify Allowed MAC Addresses<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Define the permitted address either statically or dynamically via sticky learning:<\/p>\n<pre><code class=\"language-text\">! Option A: Static Assignment\nSwitch(config-if)# switchport port-security mac-address 00aa.bbcc.ddee\n\n! Option B: Sticky Learning (learns and saves the first active MAC connected)\nSwitch(config-if)# switchport port-security mac-address sticky\nSwitch(config-if)# end\n<\/code><\/pre>\n<p>When an unauthorized device is plugged in, the switch drops traffic according to the configured violation mode, stopping rogue devices before they enter the network.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Verification_and_Unblocking_Frequently_Asked_Questions\"><\/span>Verification and Unblocking: Frequently Asked Questions<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_view_and_verify_active_static_drop_entries\"><\/span>How do I view and verify active static drop entries?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To display all statically blocked MAC addresses across all active VLANs, execute:<\/p>\n<pre><code class=\"language-text\">Switch# show mac address-table static | include Drop\n<\/code><\/pre>\n<p>To limit output to a specific VLAN:<\/p>\n<pre><code class=\"language-text\">Switch# show mac address-table static vlan 10 | include Drop\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_remove_a_static_drop_entry_and_unblock_the_device\"><\/span>How do I remove a static drop entry and unblock the device?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Negate the drop command using the exact MAC address and VLAN ID configured:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# no mac address-table static 0011.2233.4455 vlan 10 drop\nSwitch(config)# end\n<\/code><\/pre>\n<p>Once removed, normal dynamic address learning resumes for that MAC address on the next transmitted frame.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_verify_if_a_MAC_ACL_is_active_and_dropping_frames\"><\/span>How do I verify if a MAC ACL is active and dropping frames?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Check the hit counters on the access-list:<\/p>\n<pre><code class=\"language-text\">Switch# show access-lists ACL_BLOCK_ROGUE_MAC\nExtended MAC access list ACL_BLOCK_ROGUE_MAC\n    deny   host 0011.2233.4455 any (1452 matches)\n    permit any any (89431 matches)\n<\/code><\/pre>\n<p>To remove the filter entirely from a port:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet1\/0\/12\nSwitch(config-if)# no mac access-group ACL_BLOCK_ROGUE_MAC in\nSwitch(config-if)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_recover_a_port_placed_into_an_err-disabled_state_by_Port_Security\"><\/span>How do I recover a port placed into an err-disabled state by Port Security?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If an unauthorized MAC address caused an interface to enter the <code>err-disabled<\/code> state under <code>shutdown<\/code> violation mode:<\/p>\n<ol>\n<li>Confirm the error state:<br \/>\n   <code>text<br \/>\n   Switch# show interfaces status err-disabled<\/code><\/li>\n<li>Disconnect the offending device, then bounce the interface manually:<br \/>\n   <code>text<br \/>\n   Switch# configure terminal<br \/>\n   Switch(config)# interface GigabitEthernet1\/0\/5<br \/>\n   Switch(config-if)# shutdown<br \/>\n   Switch(config-if)# no shutdown<br \/>\n   Switch(config-if)# end<\/code><\/li>\n<li>Alternatively, enable automatic recovery so the port resets after a set timer:<br \/>\n   <code>text<br \/>\n   Switch(config)# errdisable recovery cause psecure-violation<br \/>\n   Switch(config)# errdisable recovery interval 300<\/code><\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Catalyst_Platform_Specifications_and_Architecture_Reference\"><\/span>Cisco Catalyst Platform Specifications and Architecture Reference<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Feature availability, command syntax, and hardware scale for Layer 2 filtering vary by hardware generation and Cisco IOS\/IOS-XE release.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Command_Syntax_Differences_by_OS\"><\/span>Command Syntax Differences by OS<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Cisco IOS-XE (Catalyst 9200, 9300, 9400, 9500, 9600 Series):<\/strong><br \/>\n  Uses the space-separated syntax exclusively:<br \/>\n  <code>mac address-table static [mac-address] vlan [vlan-id] drop<\/code><\/li>\n<li><strong>Classic Cisco IOS (Catalyst 2960-X, 3560, 3750, 3850 running legacy releases):<\/strong><br \/>\n  May support either <code>mac address-table<\/code> or the hyphenated <code>mac-address-table<\/code> syntax depending on maintenance train. Both variants manipulate the hardware forwarding database identically.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Hardware_TCAM_Allocation\"><\/span>Hardware TCAM Allocation<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>PACL Processing:<\/strong> Applied directly at interface ingress through the Port Access Control Processor. MAC ACL rules consume Layer 2 TCAM entries. If TCAM capacity is exhausted, additional access-groups cannot be applied to physical interfaces.<\/li>\n<li><strong>PACL vs. IP Traffic:<\/strong> On Cisco Catalyst platforms, MAC access-lists filter non-IP traffic by default. When filtering IPv4 or IPv6 traffic via MAC ACLs, verify that your specific switch model supports Layer 2 protocol filtering for IP packets in hardware, or use a VLAN Access Map (VACL) instead.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Topology_and_Interface_Boundaries\"><\/span>Topology and Interface Boundaries<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Port Security Restrictions:<\/strong><\/li>\n<li>Supported on Layer 2 switchports only. Port security cannot be configured on Layer 3 routed interfaces (<code>no switchport<\/code>), EtherChannel bundle members, or SPAN destination ports.<\/li>\n<li>While supported on trunk ports on select platforms, maximum MAC thresholds apply across all carried VLANs unless specifically configured per-VLAN using <code>switchport port-security maximum [value] vlan [vlan-list]<\/code>.<\/li>\n<li><strong>Static Drops and Multicast:<\/strong> The <code>drop<\/code> keyword cannot be combined with multicast or broadcast MAC address strings (<code>ffff.ffff.ffff<\/code> or addresses beginning with <code>0100.5e<\/code>).<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Official_Technical_Resources\"><\/span>Official Technical Resources<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For platform-specific TCAM limits and comprehensive configuration matrices, consult the following official Cisco Systems documentation:<br \/>\n* <em>Cisco Catalyst 9000 Series Switches Security Configuration Guide (Layer 2 Security)<\/em><br \/>\n* <em>Cisco IOS-XE Command Reference: Interface and Hardware Commands<\/em><br \/>\n* <em>Cisco Catalyst Switch Port Security Configuration and Troubleshooting Guides<\/em><\/p>\n<hr \/>\n<p>By matching the appropriate filtering mechanism to your operational scenario\u2014using static drop commands for rapid quarantine, MAC access-lists for granular port-level rules, or port security for persistent edge defense\u2014you can maintain tight control over hardware access across your Cisco switching infrastructure.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-block-mac-address-in-cisco-switch_24502.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Block+MAC+Address+in+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\",\"How to Block MAC Address in Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Whether isolating an infected host, stopping an unauthorized device from accessing sensitive subnets, or mitigating Layer 2 attacks like ARP spoofing, blocking traffic by Media Access Control (MAC) address is a core operational task for network administrators. Cisco IOS and Cisco IOS-XE switches provide multiple native mechanisms to discard or filter frames based on hardware&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Block MAC Address in Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Block MAC Address in Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Whether isolating an infected host, stopping an unauthorized device from accessing sensitive subnets, or mitigating Layer 2 attacks like ARP spoofing, blocking traffic by Media Access Control (MAC) address is a core operational task for network administrators. Cisco IOS and Cisco IOS-XE switches provide multiple native mechanisms to discard or filter frames based on hardware... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T03:19:16+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\",\"name\":\"How to Block MAC Address in Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T03:19:16+00:00\",\"dateModified\":\"2026-11-16T03:19:16+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Block MAC Address in Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Block MAC Address in Cisco Switch\",\"datePublished\":\"2026-11-16T03:19:16+00:00\",\"dateModified\":\"2026-11-16T03:19:16+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#webpage\"},\"wordCount\":1291,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Block MAC Address in Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html","og_locale":"en_US","og_type":"article","og_title":"How to Block MAC Address in Cisco Switch - SPOTO Official Blog","og_description":"Whether isolating an infected host, stopping an unauthorized device from accessing sensitive subnets, or mitigating Layer 2 attacks like ARP spoofing, blocking traffic by Media Access Control (MAC) address is a core operational task for network administrators. Cisco IOS and Cisco IOS-XE switches provide multiple native mechanisms to discard or filter frames based on hardware... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T03:19:16+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html","name":"How to Block MAC Address in Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T03:19:16+00:00","dateModified":"2026-11-16T03:19:16+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Block MAC Address in Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Block MAC Address in Cisco Switch","datePublished":"2026-11-16T03:19:16+00:00","dateModified":"2026-11-16T03:19:16+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#webpage"},"wordCount":1291,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-block-mac-address-in-cisco-switch_24502.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24502"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24502"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24502\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24502"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24502"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24502"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}