{"id":24488,"date":"2026-11-16T10:54:39","date_gmt":"2026-11-16T02:54:39","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html"},"modified":"2026-11-16T10:54:39","modified_gmt":"2026-11-16T02:54:39","slug":"how-to-change-vlan-in-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html","title":{"rendered":"How to Change VLAN in Cisco Switch"},"content":{"rendered":"<p>VLAN (Virtual Local Area Network) segmentation is foundational to enterprise network design, separating broadcast domains, enforcing security boundaries, and directing traffic flow across Layer 2 environments. Whether reallocating workstation ports during office reconfigurations, altering native tags on inter-switch uplinks, or transitioning switch virtual interfaces (SVIs) away from the default management subnet, network administrators regularly need to modify VLAN assignments in Cisco IOS and IOS-XE switches.<\/p>\n<p>Applying VLAN modifications accurately requires an understanding of interface modes, trunk negotiation, and control-plane reachability to avoid unexpected outages or remote access lockouts. The following sections detail step-by-step methods for updating access ports, trunk links, and management interfaces, followed by operational verification steps, ready-to-use CLI templates, and official Cisco Catalyst configuration guidelines.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Reassigning_an_Access_Port_to_a_New_VLAN\" title=\"Reassigning an Access Port to a New VLAN\">Reassigning an Access Port to a New VLAN<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_1_Access_Privileged_EXEC_and_Global_Configuration_Mode\" title=\"Step 1: Access Privileged EXEC and Global Configuration Mode\">Step 1: Access Privileged EXEC and Global Configuration Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_2_Ensure_the_Target_VLAN_Exists\" title=\"Step 2: Ensure the Target VLAN Exists\">Step 2: Ensure the Target VLAN Exists<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_3_Enter_the_Target_Interface\" title=\"Step 3: Enter the Target Interface\">Step 3: Enter the Target Interface<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_4_Reassign_the_Access_VLAN\" title=\"Step 4: Reassign the Access VLAN\">Step 4: Reassign the Access VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_5_Save_Configuration_Changes\" title=\"Step 5: Save Configuration Changes\">Step 5: Save Configuration Changes<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Changing_VLANs_on_Multiple_Ports_Using_Interface_Range\" title=\"Changing VLANs on Multiple Ports Using Interface Range\">Changing VLANs on Multiple Ports Using Interface Range<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_1_Enter_Global_Configuration_Mode\" title=\"Step 1: Enter Global Configuration Mode\">Step 1: Enter Global Configuration Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_2_Define_the_Interface_Range\" title=\"Step 2: Define the Interface Range\">Step 2: Define the Interface Range<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_3_Apply_the_Access_VLAN_Bulk_Change\" title=\"Step 3: Apply the Access VLAN Bulk Change\">Step 3: Apply the Access VLAN Bulk Change<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_4_Persist_the_Configuration\" title=\"Step 4: Persist the Configuration\">Step 4: Persist the Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Modifying_Native_and_Allowed_VLANs_on_Trunk_Ports\" title=\"Modifying Native and Allowed VLANs on Trunk Ports\">Modifying Native and Allowed VLANs on Trunk Ports<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_1_Enter_the_Trunk_Interface_Configuration\" title=\"Step 1: Enter the Trunk Interface Configuration\">Step 1: Enter the Trunk Interface Configuration<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_2_Modify_the_Native_VLAN\" title=\"Step 2: Modify the Native VLAN\">Step 2: Modify the Native VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_3_Adjust_the_Allowed_VLAN_List\" title=\"Step 3: Adjust the Allowed VLAN List\">Step 3: Adjust the Allowed VLAN List<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_4_Commit_Changes\" title=\"Step 4: Commit Changes\">Step 4: Commit Changes<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Changing_the_Switch_Management_VLAN_and_SVI\" title=\"Changing the Switch Management VLAN and SVI\">Changing the Switch Management VLAN and SVI<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_1_Create_the_New_Management_VLAN\" title=\"Step 1: Create the New Management VLAN\">Step 1: Create the New Management VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_2_Deactivate_or_Reassign_the_Old_SVI\" title=\"Step 2: Deactivate or Reassign the Old SVI\">Step 2: Deactivate or Reassign the Old SVI<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_3_Configure_the_New_SVI\" title=\"Step 3: Configure the New SVI\">Step 3: Configure the New SVI<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_4_Update_the_Default_Gateway\" title=\"Step 4: Update the Default Gateway\">Step 4: Update the Default Gateway<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Step_5_Verify_Connectivity_and_Save\" title=\"Step 5: Verify Connectivity and Save\">Step 5: Verify Connectivity and Save<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Verifying_VLAN_Assignments_and_Interface_Status\" title=\"Verifying VLAN Assignments and Interface Status\">Verifying VLAN Assignments and Interface Status<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#1_Global_VLAN_and_Port_Membership_show_vlan_brief\" title=\"1. Global VLAN and Port Membership: show vlan brief\">1. Global VLAN and Port Membership: show vlan brief<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#2_Interface_Layer_2_Properties_show_interfaces_switchport\" title=\"2. Interface Layer 2 Properties: show interfaces switchport\">2. Interface Layer 2 Properties: show interfaces switchport<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#3_Trunk_Link_Verification_show_interfaces_trunk\" title=\"3. Trunk Link Verification: show interfaces trunk\">3. Trunk Link Verification: show interfaces trunk<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-27\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#4_Port_Summary_Check_show_interfaces_status\" title=\"4. Port Summary Check: show interfaces status\">4. Port Summary Check: show interfaces status<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-28\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Cisco_VLAN_CLI_Configuration_Cheat_Sheet\" title=\"Cisco VLAN CLI Configuration Cheat Sheet\">Cisco VLAN CLI Configuration Cheat Sheet<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-29\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Cisco_Catalyst_VLAN_Architecture_and_Official_Documentation_Standards\" title=\"Cisco Catalyst VLAN Architecture and Official Documentation Standards\">Cisco Catalyst VLAN Architecture and Official Documentation Standards<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-30\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#1_VLAN_ID_Ranges_and_Storage_Behavior\" title=\"1. VLAN ID Ranges and Storage Behavior\">1. VLAN ID Ranges and Storage Behavior<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-31\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#2_Native_VLAN_Encapsulation_and_Tagging\" title=\"2. Native VLAN Encapsulation and Tagging\">2. Native VLAN Encapsulation and Tagging<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-32\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#3_Official_Documentation_References\" title=\"3. Official Documentation References\">3. Official Documentation References<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-33\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Reassigning_an_Access_Port_to_a_New_VLAN\"><\/span>Reassigning an Access Port to a New VLAN<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>An access port belongs to exactly one broadcast domain and forwards untagged Ethernet frames to connected end-user devices such as PCs, printers, or servers. When an endpoint moves to a new department or subnet, reassigning its switchport from its current access VLAN to a new one is a straightforward CLI procedure.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Access_Privileged_EXEC_and_Global_Configuration_Mode\"><\/span>Step 1: Access Privileged EXEC and Global Configuration Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Log in to your switch via SSH or the console port and elevate your session to privileged EXEC mode:<\/p>\n<pre><code class=\"language-text\">Switch&gt; enable\nSwitch# configure terminal\nSwitch(config)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Ensure_the_Target_VLAN_Exists\"><\/span>Step 2: Ensure the Target VLAN Exists<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Before assigning an interface to a VLAN, verify that the VLAN exists in the switch&#8217;s local database. While Cisco IOS will dynamically create an unconfigured VLAN when applied to an access port, explicitly creating and naming it maintains configuration hygiene:<\/p>\n<pre><code class=\"language-text\">Switch(config)# vlan 20\nSwitch(config-vlan)# name Marketing\nSwitch(config-vlan)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Enter_the_Target_Interface\"><\/span>Step 3: Enter the Target Interface<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Navigate to the interface configuration context for the physical port you intend to reassign:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet1\/0\/5\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Reassign_the_Access_VLAN\"><\/span>Step 4: Reassign the Access VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Explicitly enforce access mode and assign the new VLAN ID. The <code>switchport access vlan<\/code> command replaces any previously configured access VLAN on that interface immediately:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport mode access\nSwitch(config-if)# switchport access vlan 20\nSwitch(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Save_Configuration_Changes\"><\/span>Step 5: Save Configuration Changes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Persist your changes from running memory to NVRAM to ensure the configuration survives a switch reboot:<\/p>\n<pre><code class=\"language-text\">Switch(config)# end\nSwitch# copy running-config startup-config\n<\/code><\/pre>\n<p>Once the command executes, the port drops any dynamic ARP or MAC entries associated with the old VLAN, flushes its CAM table entry for that port, and begins tagging ingress packets into the new broadcast domain.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Changing_VLANs_on_Multiple_Ports_Using_Interface_Range\"><\/span>Changing VLANs on Multiple Ports Using Interface Range<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Reconfiguring ports one by one across high-density access switches is time-consuming and error-prone. Cisco IOS provides the <code>interface range<\/code> macro command, allowing you to bulk-assign contiguous or non-contiguous blocks of interfaces to a target VLAN in a single operation.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Enter_Global_Configuration_Mode\"><\/span>Step 1: Enter Global Configuration Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enter global configuration mode:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Define_the_Interface_Range\"><\/span>Step 2: Define the Interface Range<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The <code>interface range<\/code> command accepts contiguous port spans separated by a hyphen, non-contiguous ports or modules separated by commas, or combinations of both. <\/p>\n<ul>\n<li>\n<p><strong>Contiguous ports on a single module:<\/strong><br \/>\n  <code>text<br \/>\n  Switch(config)# interface range GigabitEthernet1\/0\/1 - 12<\/code><br \/>\n  <em>(Note: Cisco IOS syntax requires a space before and after the hyphen).<\/em><\/p>\n<\/li>\n<li>\n<p><strong>Non-contiguous ports or mixed modules:<\/strong><br \/>\n  <code>text<br \/>\n  Switch(config)# interface range GigabitEthernet1\/0\/1 - 4, GigabitEthernet1\/0\/9 - 12, GigabitEthernet2\/0\/1<\/code><\/p>\n<\/li>\n<\/ul>\n<p>Upon entering the command, the prompt changes to <code>Switch(config-if-range)#<\/code>, indicating that any subsequent configuration will apply uniformly across all specified interfaces.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Apply_the_Access_VLAN_Bulk_Change\"><\/span>Step 3: Apply the Access VLAN Bulk Change<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Set the administrative mode to access and apply the desired VLAN:<\/p>\n<pre><code class=\"language-text\">Switch(config-if-range)# switchport mode access\nSwitch(config-if-range)# switchport access vlan 30\nSwitch(config-if-range)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Persist_the_Configuration\"><\/span>Step 4: Persist the Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Exit configuration mode and write the modifications to NVRAM:<\/p>\n<pre><code class=\"language-text\">Switch(config)# end\nSwitch# write memory\n<\/code><\/pre>\n<p>Using the <code>interface range<\/code> command minimizes human error during bulk re-addressing projects and ensures identical port security and Layer 2 properties across entire switch modules.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Modifying_Native_and_Allowed_VLANs_on_Trunk_Ports\"><\/span>Modifying Native and Allowed VLANs on Trunk Ports<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Unlike access ports, trunk links transport traffic for multiple VLANs across switches or between a switch and a router using IEEE 802.1Q encapsulation. Changing VLAN settings on a trunk involves either updating the <strong>native VLAN<\/strong> (which carries untagged control and data frames) or restricting the <strong>allowed VLAN list<\/strong> traversing the pipe.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Enter_the_Trunk_Interface_Configuration\"><\/span>Step 1: Enter the Trunk Interface Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Identify your trunk interface (frequently an uplink or high-speed fiber port) and enter interface mode:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# interface GigabitEthernet1\/0\/24\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Modify_the_Native_VLAN\"><\/span>Step 2: Modify the Native VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>By default, Cisco switches assign VLAN 1 as the 802.1Q native VLAN. For security hardening, network standards recommend changing the native VLAN to an unused, non-default VLAN ID (such as VLAN 99 or 999):<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport trunk native vlan 99\n<\/code><\/pre>\n<blockquote>\n<p><strong>Caution:<\/strong> The native VLAN must match on both ends of the trunk link. If there is a mismatch, Cisco Discovery Protocol (CDP) will generate <code>%CDP-4-NATIVE_VLAN_MISMATCH<\/code> syslog errors, and Spanning Tree Protocol (STP) will block the port to prevent Layer 2 forwarding loops. Immediately execute the corresponding native VLAN change on the connected neighboring switch.<\/p>\n<\/blockquote>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Adjust_the_Allowed_VLAN_List\"><\/span>Step 3: Adjust the Allowed VLAN List<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>By default, a trunk permits all active VLANs (<code>1-4094<\/code>). To enhance security and restrict unnecessary broadcast traffic from crossing uplinks, adjust the allowed list using granular parameters:<\/p>\n<ul>\n<li>\n<p><strong>Safely add a new VLAN to an existing trunk:<\/strong><br \/>\n  <code>text<br \/>\n  Switch(config-if)# switchport trunk allowed vlan add 40<\/code><br \/>\n  <em>(Warning: Do not use <code>switchport trunk allowed vlan 40<\/code> without the <code>add<\/code> keyword, as omitting <code>add<\/code> overwrites the entire trunk list and restricts the link solely to VLAN 40, severing traffic for all other subnets).<\/em><\/p>\n<\/li>\n<li>\n<p><strong>Remove a specific VLAN from an active trunk:<\/strong><br \/>\n  <code>text<br \/>\n  Switch(config-if)# switchport trunk allowed vlan remove 10<\/code><\/p>\n<\/li>\n<li>\n<p><strong>Reset the trunk to pass all VLANs:<\/strong><br \/>\n  <code>text<br \/>\n  Switch(config-if)# switchport trunk allowed vlan all<\/code><\/p>\n<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Commit_Changes\"><\/span>Step 4: Commit Changes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Save the updated trunk parameters:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# end\nSwitch# copy running-config startup-config\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Changing_the_Switch_Management_VLAN_and_SVI\"><\/span>Changing the Switch Management VLAN and SVI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A Switch Virtual Interface (SVI) provides Layer 3 IP connectivity to the switch for administrative management protocols such as SSH, SNMP, and Syslog. By default, out-of-the-box Cisco switches assign the management IP address to <code>Interface VLAN 1<\/code>. Best practices dictate migrating management reachability to an isolated, dedicated management VLAN (e.g., VLAN 100).<\/p>\n<p>Because reconfiguring the management IP disrupts remote connectivity, perform these steps via a direct console connection or stage the commands carefully within a single configuration session.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Create_the_New_Management_VLAN\"><\/span>Step 1: Create the New Management VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Ensure the new management VLAN is provisioned on the switch and permitted across any incoming trunk links:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# vlan 100\nSwitch(config-vlan)# name Management_Network\nSwitch(config-vlan)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Deactivate_or_Reassign_the_Old_SVI\"><\/span>Step 2: Deactivate or Reassign the Old SVI<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To prevent IP address conflicts and ensure traffic routes over the new subnet, shut down or remove the IP from the existing SVI:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface vlan 1\nSwitch(config-if)# no ip address\nSwitch(config-if)# shutdown\nSwitch(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Configure_the_New_SVI\"><\/span>Step 3: Configure the New SVI<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Create the new SVI, assign its static IP address, and bring the interface administratively up:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface vlan 100\nSwitch(config-if)# description In-Band Management\nSwitch(config-if)# ip address 10.10.100.15 255.255.255.0\nSwitch(config-if)# no shutdown\nSwitch(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Update_the_Default_Gateway\"><\/span>Step 4: Update the Default Gateway<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For pure Layer 2 switches, point the default gateway to the Layer 3 core switch or firewall router servicing the new management subnet:<\/p>\n<pre><code class=\"language-text\">Switch(config)# ip default-gateway 10.10.100.1\nSwitch(config)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Verify_Connectivity_and_Save\"><\/span>Step 5: Verify Connectivity and Save<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Test reachability by pinging your management gateway, then commit the configuration:<\/p>\n<pre><code class=\"language-text\">Switch# ping 10.10.100.1\nSwitch# write memory\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Verifying_VLAN_Assignments_and_Interface_Status\"><\/span>Verifying VLAN Assignments and Interface Status<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>After modifying VLAN configurations, verify that the ports have bound to their expected domains and that operational trunk states reflect your adjustments. Cisco IOS provides dedicated operational <code>show<\/code> commands for this purpose.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"1_Global_VLAN_and_Port_Membership_show_vlan_brief\"><\/span>1. Global VLAN and Port Membership: <code>show vlan brief<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The <code>show vlan brief<\/code> command displays all configured VLANs along with every access port assigned to them:<\/p>\n<pre><code class=\"language-text\">Switch# show vlan brief\n\nVLAN Name                             Status    Ports\n---- -------------------------------- --------- -------------------------------\n1    default                          active    Gi1\/0\/13, Gi1\/0\/14\n20   Marketing                        active    Gi1\/0\/5, Gi1\/0\/6\n30   Engineering                      active    Gi1\/0\/1, Gi1\/0\/2, Gi1\/0\/3, Gi1\/0\/4\n100  Management_Network               active    \n<\/code><\/pre>\n<p><em>Note: Trunk ports do not appear in the <code>show vlan brief<\/code> output because they do not belong statically to a single access VLAN.<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"2_Interface_Layer_2_Properties_show_interfaces_switchport\"><\/span>2. Interface Layer 2 Properties: <code>show interfaces switchport<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To review the granular administrative and operational status of an individual port, run <code>show interfaces &lt;interface-id&gt; switchport<\/code>:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces GigabitEthernet1\/0\/5 switchport\nName: Gi1\/0\/5\nSwitchport: Enabled\nAdministrative Mode: static access\nOperational Mode: static access\nAdministrative Trunking Encapsulation: dot1q\nNegotiation of Trunking: Off\nAccess Mode VLAN: 20 (Marketing)\nTrunking Native Mode VLAN: 1 (default)\nAdministrative Native VLAN tagging: enabled\nVoice VLAN: none\n<\/code><\/pre>\n<p>Verify that <strong>Operational Mode<\/strong> matches your intended configuration and that <strong>Access Mode VLAN<\/strong> reflects the updated ID.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"3_Trunk_Link_Verification_show_interfaces_trunk\"><\/span>3. Trunk Link Verification: <code>show interfaces trunk<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For uplinks, verify the operational native VLAN and the list of permitted and active forwarding VLANs:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces trunk\n\nPort        Mode             Encapsulation  Status        Native vlan\nGi1\/0\/24    on               802.1q         trunking      99\n\nPort        Vlans allowed on trunk\nGi1\/0\/24    20,30,40,99,100\n\nPort        Vlans allowed and active in management domain\nGi1\/0\/24    20,30,40,99,100\n\nPort        Vlans in spanning tree forwarding state and not pruned\nGi1\/0\/24    20,30,40,99,100\n<\/code><\/pre>\n<p>Confirm that your modified native VLAN matches the neighbor switch and that newly added VLANs appear in the <code>Vlans in spanning tree forwarding state<\/code> output.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"4_Port_Summary_Check_show_interfaces_status\"><\/span>4. Port Summary Check: <code>show interfaces status<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To quickly verify port-to-VLAN mappings across the entire chassis at a glance:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces status\nPort      Name               Status       Vlan       Duplex  Speed Type\nGi1\/0\/1                      connected    30         a-full  a-1000 10\/100\/1000BaseTX\nGi1\/0\/5                      connected    20         a-full  a-1000 10\/100\/1000BaseTX\nGi1\/0\/24  UPLINK-CORE        connected    trunk      a-full  a-1000 10\/100\/1000BaseTX\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_VLAN_CLI_Configuration_Cheat_Sheet\"><\/span>Cisco VLAN CLI Configuration Cheat Sheet<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use these copy-and-paste syntax blocks to streamline day-to-day administrative tasks:<\/p>\n<pre><code class=\"language-text\">! ==========================================================\n! 1. CREATE VLAN\n! ==========================================================\nconfigure terminal\nvlan &lt;VLAN_ID&gt;\n name &lt;VLAN_NAME&gt;\nexit\n\n! ==========================================================\n! 2. REASSIGN SINGLE ACCESS PORT\n! ==========================================================\ninterface &lt;INTERFACE_ID&gt;\n switchport mode access\n switchport access vlan &lt;VLAN_ID&gt;\n no shutdown\nexit\n\n! ==========================================================\n! 3. BULK REASSIGN MULTIPLE ACCESS PORTS\n! ==========================================================\ninterface range &lt;START_INTERFACE&gt; - &lt;END_INTERFACE&gt;\n switchport mode access\n switchport access vlan &lt;VLAN_ID&gt;\nexit\n\n! ==========================================================\n! 4. TRUNK CONFIGURATION (NATIVE &amp; ALLOWED LIST)\n! ==========================================================\ninterface &lt;TRUNK_INTERFACE_ID&gt;\n switchport mode trunk\n switchport trunk native vlan &lt;NATIVE_VLAN_ID&gt;\n switchport trunk allowed vlan add &lt;VLAN_TO_ADD&gt;\n switchport trunk allowed vlan remove &lt;VLAN_TO_REMOVE&gt;\nexit\n\n! ==========================================================\n! 5. MIGRATE SVI MANAGEMENT INTERFACE\n! ==========================================================\ninterface vlan &lt;OLD_MANAGEMENT_VLAN&gt;\n no ip address\n shutdown\nexit\ninterface vlan &lt;NEW_MANAGEMENT_VLAN&gt;\n description Management\n ip address &lt;MANAGEMENT_IP&gt; &lt;SUBNET_MASK&gt;\n no shutdown\nexit\nip default-gateway &lt;GATEWAY_IP&gt;\n\n! ==========================================================\n! 6. SAVE &amp; VERIFY COMMANDS\n! ==========================================================\nend\nwrite memory\nshow vlan brief\nshow interfaces trunk\nshow interfaces &lt;INTERFACE_ID&gt; switchport\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Catalyst_VLAN_Architecture_and_Official_Documentation_Standards\"><\/span>Cisco Catalyst VLAN Architecture and Official Documentation Standards<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Cisco Catalyst switches running Cisco IOS or Cisco IOS-XE adhere to IEEE 802.1Q encapsulation standards. The following parameters and operational limits govern VLAN implementation across Catalyst platforms:<\/p>\n<h3><span class=\"ez-toc-section\" id=\"1_VLAN_ID_Ranges_and_Storage_Behavior\"><\/span>1. VLAN ID Ranges and Storage Behavior<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco Catalyst platforms divide the IEEE 802.1Q 12-bit VLAN space (4,096 possible IDs) into distinct functional tiers:<\/p>\n<ul>\n<li><strong>Reserved System VLANs:<\/strong> VLAN 0 and VLAN 4095 are reserved for system usage and 802.1p frame prioritization. They cannot be created, modified, or deleted.<\/li>\n<li><strong>Default VLAN (VLAN 1):<\/strong> Present on all Cisco switches. It is non-deletable and non-prunable. By default, all ports belong to VLAN 1 until reassigned. Control protocols (e.g., CDP, VTP, PAgP, DTP) originate over VLAN 1 regardless of the native VLAN setting unless explicitly encapsulated via global control plane configurations.<\/li>\n<li><strong>Normal Range VLANs (VLANs 1\u20131005):<\/strong> Traditional VLANs used across enterprise networks. VLANs 1002\u20131005 are reserved for legacy architectures (FDDI, Token Ring) and cannot be deleted. In switches operating in VLAN Trunking Protocol (VTP) versions 1 or 2 (Client\/Server mode), normal-range VLAN definitions are stored in flash memory in the <code>vlan.dat<\/code> file rather than <code>startup-config<\/code>.<\/li>\n<li><strong>Extended Range VLANs (VLANs 1006\u20134094):<\/strong> Designed for service providers and high-density environments. To use extended range VLANs in VTP v1 or v2, the switch must operate in <strong>VTP Transparent mode<\/strong>. Under VTP v3, extended range VLANs can be created in both Server and Transparent modes and are saved directly into the running configuration file.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"2_Native_VLAN_Encapsulation_and_Tagging\"><\/span>2. Native VLAN Encapsulation and Tagging<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>By IEEE 802.1Q specifications, frames belonging to the configured native VLAN cross the trunk without an 802.1Q header (untagged). Cisco IOS provides the global command:<\/p>\n<pre><code class=\"language-text\">Switch(config)# vlan dot1q tag native\n<\/code><\/pre>\n<p>When enabled globally, the switch forces 802.1Q tags on native VLAN frames as well, preventing VLAN-hopping security vulnerabilities and double-tagging attacks.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"3_Official_Documentation_References\"><\/span>3. Official Documentation References<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For platform-specific caveats, hardware ASIC allocation matrices, and configuration command references, consult the following official Cisco publications:<\/p>\n<ul>\n<li><strong>Cisco Catalyst 9000 Series Switches:<\/strong> <em>Layer 2 Configuration Guide \u2014 Configuring VLANs<\/em> (Cisco IOS-XE Documentation Library).<\/li>\n<li><strong>Cisco Catalyst 1000\/2960-X\/3850 Series Switches:<\/strong> <em>Software Configuration Guide, VLAN Configuration Chapter<\/em> (Cisco IOS Technical Support Reference).<\/li>\n<li><strong>Cisco Command Reference:<\/strong> <em>Cisco IOS Interface and Hardware Component Command Reference<\/em> (Covers full administrative keyword definitions for <code>switchport<\/code>, <code>vlan<\/code>, and <code>interface range<\/code> structures).<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Changing VLAN assignments across a Cisco switch environment requires using the appropriate CLI commands for your port type: applying <code>switchport access vlan<\/code> for single or bulk endpoint moves, maintaining matching native and allowed lists on 802.1Q trunk links, and carefully sequencing IP changes on SVIs to prevent remote management lockouts. Following these procedures and verifying your modifications with <code>show vlan brief<\/code> and <code>show interfaces trunk<\/code> ensures consistent broadcast domain segmentation and stable Layer 2 network performance.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-vlan-in-cisco-switch_24488.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+VLAN+in+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\",\"How to Change VLAN in Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>VLAN (Virtual Local Area Network) segmentation is foundational to enterprise network design, separating broadcast domains, enforcing security boundaries, and directing traffic flow across Layer 2 environments. Whether reallocating workstation ports during office reconfigurations, altering native tags on inter-switch uplinks, or transitioning switch virtual interfaces (SVIs) away from the default management subnet, network administrators regularly need&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change VLAN in Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change VLAN in Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"VLAN (Virtual Local Area Network) segmentation is foundational to enterprise network design, separating broadcast domains, enforcing security boundaries, and directing traffic flow across Layer 2 environments. Whether reallocating workstation ports during office reconfigurations, altering native tags on inter-switch uplinks, or transitioning switch virtual interfaces (SVIs) away from the default management subnet, network administrators regularly need... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:54:39+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\",\"name\":\"How to Change VLAN in Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:54:39+00:00\",\"dateModified\":\"2026-11-16T02:54:39+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change VLAN in Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change VLAN in Cisco Switch\",\"datePublished\":\"2026-11-16T02:54:39+00:00\",\"dateModified\":\"2026-11-16T02:54:39+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#webpage\"},\"wordCount\":1580,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change VLAN in Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html","og_locale":"en_US","og_type":"article","og_title":"How to Change VLAN in Cisco Switch - SPOTO Official Blog","og_description":"VLAN (Virtual Local Area Network) segmentation is foundational to enterprise network design, separating broadcast domains, enforcing security boundaries, and directing traffic flow across Layer 2 environments. Whether reallocating workstation ports during office reconfigurations, altering native tags on inter-switch uplinks, or transitioning switch virtual interfaces (SVIs) away from the default management subnet, network administrators regularly need... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:54:39+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html","name":"How to Change VLAN in Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:54:39+00:00","dateModified":"2026-11-16T02:54:39+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change VLAN in Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change VLAN in Cisco Switch","datePublished":"2026-11-16T02:54:39+00:00","dateModified":"2026-11-16T02:54:39+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#webpage"},"wordCount":1580,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-vlan-in-cisco-switch_24488.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24488"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24488"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24488\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24488"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24488"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24488"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}