{"id":24487,"date":"2026-11-16T10:52:41","date_gmt":"2026-11-16T02:52:41","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html"},"modified":"2026-11-16T10:52:41","modified_gmt":"2026-11-16T02:52:41","slug":"how-to-change-native-vlan-on-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html","title":{"rendered":"How to Change Native VLAN on Cisco Switch"},"content":{"rendered":"<p>In an enterprise Cisco switching environment, IEEE 802.1Q trunk links carry traffic across multiple VLANs by appending a four-byte tag to standard Ethernet frames. However, 802.1Q also designates a single native VLAN per trunk link to handle frames that traverse the connection without a VLAN tag. By factory default, Cisco switches assign VLAN 1 as both the management VLAN and the native VLAN across all interfaces. Leaving this default intact introduces operational and security risks, particularly VLAN hopping attacks. <\/p>\n<p>Reassigning the native VLAN to an isolated, non-default VLAN across all inter-switch links is a foundational hardening baseline. This guide covers the security rationale for migrating off VLAN 1, the official Cisco IOS command reference, step-by-step trunk interface configuration, verification commands, troubleshooting mismatch errors, and global native VLAN tagging.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Understanding_Native_VLAN_Security_Risks_and_VLAN_Hopping\" title=\"Understanding Native VLAN Security Risks and VLAN Hopping\">Understanding Native VLAN Security Risks and VLAN Hopping<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Why_is_leaving_the_native_VLAN_set_to_default_VLAN_1_considered_a_security_risk\" title=\"Why is leaving the native VLAN set to default VLAN 1 considered a security risk?\">Why is leaving the native VLAN set to default VLAN 1 considered a security risk?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#How_does_a_double-tagging_VLAN_hopping_attack_work\" title=\"How does a double-tagging VLAN hopping attack work?\">How does a double-tagging VLAN hopping attack work?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#What_is_the_recommended_industry_best_practice_for_native_VLAN_assignment\" title=\"What is the recommended industry best practice for native VLAN assignment?\">What is the recommended industry best practice for native VLAN assignment?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Cisco_IOS_Command_Reference_switchport_trunk_native_vlan\" title=\"Cisco IOS Command Reference: switchport trunk native vlan\">Cisco IOS Command Reference: switchport trunk native vlan<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Command_Description\" title=\"Command Description\">Command Description<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Syntax\" title=\"Syntax\">Syntax<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Syntax_Description\" title=\"Syntax Description\">Syntax Description<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Command_Modes\" title=\"Command Modes\">Command Modes<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Platform_and_Release_Compatibility\" title=\"Platform and Release Compatibility\">Platform and Release Compatibility<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Usage_Guidelines\" title=\"Usage Guidelines\">Usage Guidelines<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Step-by-Step_Guide_Changing_the_Native_VLAN_on_a_Trunk_Port\" title=\"Step-by-Step Guide: Changing the Native VLAN on a Trunk Port\">Step-by-Step Guide: Changing the Native VLAN on a Trunk Port<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Step_1_Create_the_Dedicated_Native_VLAN\" title=\"Step 1: Create the Dedicated Native VLAN\">Step 1: Create the Dedicated Native VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Step_2_Access_the_Trunk_Interface\" title=\"Step 2: Access the Trunk Interface\">Step 2: Access the Trunk Interface<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Step_3_Apply_the_Native_VLAN_Assignment\" title=\"Step 3: Apply the Native VLAN Assignment\">Step 3: Apply the Native VLAN Assignment<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Step_4_Configure_the_Opposing_Switch\" title=\"Step 4: Configure the Opposing Switch\">Step 4: Configure the Opposing Switch<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Step_5_Save_the_Running_Configuration\" title=\"Step 5: Save the Running Configuration\">Step 5: Save the Running Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#How_to_Verify_the_Active_Native_VLAN_Configuration\" title=\"How to Verify the Active Native VLAN Configuration\">How to Verify the Active Native VLAN Configuration<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Method_1_Global_Trunk_Inspection_show_interfaces_trunk\" title=\"Method 1: Global Trunk Inspection (show interfaces trunk)\">Method 1: Global Trunk Inspection (show interfaces trunk)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Method_2_Granular_Switchport_State_show_interfaces_switchport\" title=\"Method 2: Granular Switchport State (show interfaces switchport)\">Method 2: Granular Switchport State (show interfaces switchport)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Troubleshooting_Native_VLAN_Mismatches_and_Spanning_Tree_Blocks\" title=\"Troubleshooting Native VLAN Mismatches and Spanning Tree Blocks\">Troubleshooting Native VLAN Mismatches and Spanning Tree Blocks<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Diagnosing_the_Symptoms\" title=\"Diagnosing the Symptoms\">Diagnosing the Symptoms<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Understanding_the_Network_Impact\" title=\"Understanding the Network Impact\">Understanding the Network Impact<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Remediation_Workflow\" title=\"Remediation Workflow\">Remediation Workflow<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Advanced_Hardening_Global_Native_VLAN_Tagging_Configuration_Template\" title=\"Advanced Hardening: Global Native VLAN Tagging Configuration Template\">Advanced Hardening: Global Native VLAN Tagging Configuration Template<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Global_Activation_Template\" title=\"Global Activation Template\">Global Activation Template<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-27\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Verification_Output\" title=\"Verification Output\">Verification Output<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-28\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Deployment_Caveats\" title=\"Deployment Caveats\">Deployment Caveats<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-29\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\/#Summary\" title=\"Summary\">Summary<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Understanding_Native_VLAN_Security_Risks_and_VLAN_Hopping\"><\/span>Understanding Native VLAN Security Risks and VLAN Hopping<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"Why_is_leaving_the_native_VLAN_set_to_default_VLAN_1_considered_a_security_risk\"><\/span>Why is leaving the native VLAN set to default VLAN 1 considered a security risk?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Default VLAN 1 carries critical Layer 2 control traffic, including Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP), Port Aggregation Protocol (PAgP), and Spanning Tree Protocol (STP) Bridge Protocol Data Units (BPDUs). Because all unconfigured switchports default to VLAN 1, an unauthorized device connected to an unhardened port automatically gains access to this broadcast domain. If the native VLAN on trunk links remains set to VLAN 1, untagged traffic from unauthorized access ports can traverse trunk links without inspection or routing controls, exposing management and control planes to interception and spoofing.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"How_does_a_double-tagging_VLAN_hopping_attack_work\"><\/span>How does a double-tagging VLAN hopping attack work?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Double-tagging exploits the switch&#8217;s native VLAN handling to inject traffic into a destination VLAN without traversing a router or firewall:<br \/>\n1. An attacker on an access port generates an Ethernet frame with two 802.1Q tags: an outer tag matching the trunk&#8217;s native VLAN (e.g., VLAN 1) and an inner tag targeting a restricted VLAN (e.g., VLAN 10).<br \/>\n2. The initial switch receives the frame, observes that the outer tag matches the trunk interface&#8217;s native VLAN, strips the outer tag, and forwards the frame across the trunk link untagged.<br \/>\n3. The downstream switch receives the frame. Because the outer tag was stripped, it reads the inner tag (VLAN 10), treats it as legitimate tagged traffic, and switches the packet directly into the target VLAN.<\/p>\n<p>Because this attack relies on the first switch stripping the outer native VLAN tag, double-tagging is strictly unidirectional; return traffic cannot route back using the same mechanism. However, it allows attackers to bypass access control lists (ACLs) to execute blind packet injection, such as sending malicious TCP resets, UDP exploits, or ICMP floods to target subnets.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_is_the_recommended_industry_best_practice_for_native_VLAN_assignment\"><\/span>What is the recommended industry best practice for native VLAN assignment?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Network security benchmarks, including the CIS Cisco IOS Benchmarks and NSA network infrastructure guidelines, recommend establishing a dedicated dummy VLAN (such as VLAN 999 or VLAN 888) strictly for native VLAN transit across trunk links. This dedicated VLAN should:<br \/>\n* Have no active access ports assigned to it.<br \/>\n* Contain no active Switched Virtual Interfaces (SVIs) or default gateways.<br \/>\n* Be isolated from any user data, voice, or network management traffic.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_IOS_Command_Reference_switchport_trunk_native_vlan\"><\/span>Cisco IOS Command Reference: switchport trunk native vlan<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"Command_Description\"><\/span>Command Description<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Configures the 802.1Q native VLAN for a Layer 2 interface operating in trunk mode. Frames associated with this VLAN ID traverse the trunk link without an 802.1Q encapsulation header unless native VLAN tagging is explicitly enabled.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Syntax\"><\/span>Syntax<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">switchport trunk native vlan vlan-id\nno switchport trunk native vlan\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Syntax_Description\"><\/span>Syntax Description<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><code>vlan-id<\/code>: The VLAN identifier to be used as the native VLAN. The valid range is 1 to 4094 (standard and extended VLAN ranges).<\/li>\n<li><code>no switchport trunk native vlan<\/code>: Resets the native VLAN back to the switch default (VLAN 1).<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Command_Modes\"><\/span>Command Modes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>Interface configuration (<code>config-if<\/code>)<\/li>\n<li>Interface range configuration (<code>config-if-range<\/code>)<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Platform_and_Release_Compatibility\"><\/span>Platform and Release Compatibility<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Supported across all modern Cisco Catalyst and Industrial Ethernet switching platforms running Cisco IOS, Cisco IOS-XE (Catalyst 2960, 3560, 3650, 3850, 9200, 9300, 9400, 9500, and 9600 series), and Cisco Nexus running NX-OS (where the command syntax is identical within interface configuration mode).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Usage_Guidelines\"><\/span>Usage Guidelines<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>The interface must be configured as a Layer 2 switchport (<code>switchport<\/code>) operating in trunk mode (<code>switchport mode trunk<\/code>).<\/li>\n<li>If the specified VLAN ID does not exist in the switch&#8217;s local VLAN database, traffic for that VLAN will not be forwarded until the VLAN is created.<\/li>\n<li>Both endpoints of the trunk link must be configured with an identical native VLAN ID. A mismatch triggers CDP alerts and causes Spanning Tree Protocol to place the link into an inconsistent blocking state.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_Changing_the_Native_VLAN_on_a_Trunk_Port\"><\/span>Step-by-Step Guide: Changing the Native VLAN on a Trunk Port<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To safely reassign the native VLAN on an active or newly provisioned trunk interface, follow this sequential sequence in Cisco IOS\/IOS-XE.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Create_the_Dedicated_Native_VLAN\"><\/span>Step 1: Create the Dedicated Native VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Before assigning a new native VLAN to an interface, create it in the local VLAN database and provide a descriptive name to prevent administrative confusion.<\/p>\n<pre><code class=\"language-text\">Switch1# configure terminal\nSwitch1(config)# vlan 999\nSwitch1(config-vlan)# name UNUSED_NATIVE_VLAN\nSwitch1(config-vlan)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Access_the_Trunk_Interface\"><\/span>Step 2: Access the Trunk Interface<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enter interface configuration mode for the physical interface or Port-Channel carrying the trunk link.<\/p>\n<pre><code class=\"language-text\">Switch1(config)# interface GigabitEthernet0\/1\n<\/code><\/pre>\n<p><em>(Note: If configuring an EtherChannel\/LACP bundle, apply these commands to the logical <code>interface Port-channel &lt;id&gt;<\/code> rather than the physical member ports).<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Apply_the_Native_VLAN_Assignment\"><\/span>Step 3: Apply the Native VLAN Assignment<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Ensure the port is operating as an 802.1Q trunk, then execute the reassignment command.<\/p>\n<pre><code class=\"language-text\">Switch1(config-if)# switchport trunk encapsulation dot1q\nSwitch1(config-if)# switchport mode trunk\nSwitch1(config-if)# switchport trunk native vlan 999\n<\/code><\/pre>\n<p><em>(Note: On newer Catalyst platforms, such as the 9000 series, 802.1Q is the only supported encapsulation type, meaning the <code>switchport trunk encapsulation dot1q<\/code> command is deprecated and rejected as invalid).<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Configure_the_Opposing_Switch\"><\/span>Step 4: Configure the Opposing Switch<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Immediately apply the same configuration to the remote peer switch on the other end of the link. Minimizing delay between configuring both sides prevents automated Spanning Tree Protocol blocks caused by temporary mismatches.<\/p>\n<pre><code class=\"language-text\">Switch2# configure terminal\nSwitch2(config)# vlan 999\nSwitch2(config-vlan)# name UNUSED_NATIVE_VLAN\nSwitch2(config-vlan)# interface GigabitEthernet0\/1\nSwitch2(config-if)# switchport mode trunk\nSwitch2(config-if)# switchport trunk native vlan 999\nSwitch2(config-if)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Save_the_Running_Configuration\"><\/span>Step 5: Save the Running Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Commit the configuration to NVRAM on both switches to ensure settings persist through reboots.<\/p>\n<pre><code class=\"language-text\">Switch1# copy running-config startup-config\nSwitch2# copy running-config startup-config\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Verify_the_Active_Native_VLAN_Configuration\"><\/span>How to Verify the Active Native VLAN Configuration<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once configured, verify that both the administrative settings and operational states reflect the newly assigned native VLAN ID.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Method_1_Global_Trunk_Inspection_show_interfaces_trunk\"><\/span>Method 1: Global Trunk Inspection (<code>show interfaces trunk<\/code>)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The <code>show interfaces trunk<\/code> command provides a top-level summary of all operational trunk ports, showing operational mode, encapsulation, trunking status, and the assigned native VLAN.<\/p>\n<pre><code class=\"language-text\">Switch1# show interfaces trunk\n\nPort        Mode             Encapsulation  Status        Native vlan\nGi0\/1       on               802.1q         trunking      999\n\nPort        Vlans allowed on trunk\nGi0\/1       1-4094\n\nPort        Vlans allowed and active in management domain\nGi0\/1       1,10,20,30,999\n\nPort        Vlans in spanning tree forwarding state and not pruned\nGi0\/1       1,10,20,30,999\n<\/code><\/pre>\n<p><strong>Verification Checkpoint:<\/strong> Confirm that the column labeled <strong>Native vlan<\/strong> displays <code>999<\/code> and that VLAN 999 is listed under active VLANs.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Method_2_Granular_Switchport_State_show_interfaces_switchport\"><\/span>Method 2: Granular Switchport State (<code>show interfaces switchport<\/code>)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For comprehensive diagnostic detail on a specific interface, use <code>show interfaces &lt;id&gt; switchport<\/code>.<\/p>\n<pre><code class=\"language-text\">Switch1# show interfaces GigabitEthernet0\/1 switchport\nName: Gi0\/1\nSwitchport: Enabled\nAdministrative Mode: trunk\nOperational Mode: trunk\nAdministrative Trunking Encapsulation: dot1q\nOperational Trunking Encapsulation: dot1q\nNegotiation of Trunking: On\nAccess Mode VLAN: 1 (default)\nTrunking Native Mode VLAN: 999 (UNUSED_NATIVE_VLAN)\nAdministrative Native VLAN tagging: disabled\nVoice VLAN: none\n<\/code><\/pre>\n<p><strong>Verification Checkpoint:<\/strong> Inspect the line reading <strong>Trunking Native Mode VLAN<\/strong>. It should report <code>999 (UNUSED_NATIVE_VLAN)<\/code>, confirming that the port&#8217;s trunking configuration is active.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Native_VLAN_Mismatches_and_Spanning_Tree_Blocks\"><\/span>Troubleshooting Native VLAN Mismatches and Spanning Tree Blocks<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When opposing ends of a trunk link have different native VLANs configured, Cisco switches generate syslog warnings and automatically alter port states to prevent bridging loops.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Diagnosing_the_Symptoms\"><\/span>Diagnosing the Symptoms<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>A native VLAN mismatch generates two primary syslog signatures:<\/p>\n<ol>\n<li><strong>Cisco Discovery Protocol (CDP) Alert:<\/strong><\/li>\n<\/ol>\n<pre><code class=\"language-text\">%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0\/1 (999), with Switch2 GigabitEthernet0\/1 (1).\n<\/code><\/pre>\n<ol>\n<li><strong>Spanning Tree Protocol (STP) Type-Inconsistency Alarm:<\/strong><\/li>\n<\/ol>\n<pre><code class=\"language-text\">%SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 1 on GigabitEthernet0\/1 VLAN999.\n%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking GigabitEthernet0\/1 on VLAN0999. Inconsistent local vlan.\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Understanding_the_Network_Impact\"><\/span>Understanding the Network Impact<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When CDP detects mismatched IDs, it logs a warning. More critically, Per-VLAN Spanning Tree Plus (PVST+) transmits BPDUs tagged with the PVID (Port VLAN ID) of the native VLAN. When a switch receives an untagged BPDU or a BPDU tagged with a different native VLAN ID than its local interface configuration, STP detects an inconsistency. To protect against Layer 2 forwarding loops and cross-VLAN leaking, STP transitions the native VLAN on that port into a <strong>PVID-inconsistent \/ Root-Inconsistent (blocking)<\/strong> state. Traffic on other trunked VLANs may continue passing, but the native VLAN remains down.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Remediation_Workflow\"><\/span>Remediation Workflow<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">Step 1: Check link status and identify peer native VLAN IDs\nSwitch1# show cdp neighbors GigabitEthernet0\/1 detail\n\nStep 2: Confirm local trunk settings\nSwitch1# show interfaces GigabitEthernet0\/1 trunk\n\nStep 3: Align configuration on the mismatched switchport\nSwitch2# configure terminal\nSwitch2(config)# interface GigabitEthernet0\/1\nSwitch2(config-if)# switchport trunk native vlan 999\nSwitch2(config-if)# end\n\nStep 4: Verify STP consistency restoration\nSwitch1# show spanning tree inconsistentports\n<\/code><\/pre>\n<p>Upon fixing the mismatch, the switch automatically restores the port to normal forwarding and logs a confirmation message:<\/p>\n<pre><code class=\"language-text\">%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet0\/1 on VLAN0999. Port consistency restored.\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Advanced_Hardening_Global_Native_VLAN_Tagging_Configuration_Template\"><\/span>Advanced Hardening: Global Native VLAN Tagging Configuration Template<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>As covered in the security analysis above, double-tagging exploits rely on untagged frames traversing a trunk link via the native VLAN. To close this attack vector completely, Cisco IOS supports 802.1Q native VLAN tagging. When enabled, the switch appends explicit 802.1Q tags to native VLAN frames, forcing downstream switches to drop spoofed outer tags and preventing untagged frame processing.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Global_Activation_Template\"><\/span>Global Activation Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Apply this configuration across all switches in the Layer 2 domain:<\/p>\n<pre><code class=\"language-text\">! Step 1: Enable global 802.1Q tagging for all native VLAN traffic\nconfigure terminal\nvlan dot1q tag native\n\n! Step 2: Verify the operational status of native tagging\ndo show vlan dot1q tag native\nend\n\n! Step 3: Write configuration to memory\nwrite memory\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Verification_Output\"><\/span>Verification Output<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">Switch1# show vlan dot1q tag native\nvlan dot1q tag native is enabled\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Deployment_Caveats\"><\/span>Deployment Caveats<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Network-Wide Consistency:<\/strong> Enabling <code>vlan dot1q tag native<\/code> forces the switch to tag native VLAN frames on <em>all<\/em> 802.1Q trunks. Connected switches, firewalls, and hypervisors must also expect tagged traffic on that VLAN; otherwise, untagged communication will fail.<\/li>\n<li><strong>Control Traffic Exception:<\/strong> Certain switch-generated control frames (e.g., standard BPDUs and CDP packets) continue to transmit untagged or use proprietary encapsulation according to protocol specifications, regardless of this setting.<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Summary\"><\/span>Summary<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Migrating your network off default VLAN 1 is an essential security control. By creating an isolated native VLAN, applying <code>switchport trunk native vlan &lt;id&gt;<\/code> symmetrically across all inter-switch links, verifying configurations with <code>show interfaces trunk<\/code>, and implementing global native VLAN tagging (<code>vlan dot1q tag native<\/code>), you protect your network against VLAN hopping attacks and avoid Spanning Tree PVID inconsistencies.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-native-vlan-on-cisco-switch_24487.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+Native+VLAN+on+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\",\"How to Change Native VLAN on Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>In an enterprise Cisco switching environment, IEEE 802.1Q trunk links carry traffic across multiple VLANs by appending a four-byte tag to standard Ethernet frames. However, 802.1Q also designates a single native VLAN per trunk link to handle frames that traverse the connection without a VLAN tag. By factory default, Cisco switches assign VLAN 1 as&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change Native VLAN on Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change Native VLAN on Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"In an enterprise Cisco switching environment, IEEE 802.1Q trunk links carry traffic across multiple VLANs by appending a four-byte tag to standard Ethernet frames. However, 802.1Q also designates a single native VLAN per trunk link to handle frames that traverse the connection without a VLAN tag. By factory default, Cisco switches assign VLAN 1 as... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:52:41+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\",\"name\":\"How to Change Native VLAN on Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:52:41+00:00\",\"dateModified\":\"2026-11-16T02:52:41+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change Native VLAN on Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change Native VLAN on Cisco Switch\",\"datePublished\":\"2026-11-16T02:52:41+00:00\",\"dateModified\":\"2026-11-16T02:52:41+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#webpage\"},\"wordCount\":1377,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change Native VLAN on Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html","og_locale":"en_US","og_type":"article","og_title":"How to Change Native VLAN on Cisco Switch - SPOTO Official Blog","og_description":"In an enterprise Cisco switching environment, IEEE 802.1Q trunk links carry traffic across multiple VLANs by appending a four-byte tag to standard Ethernet frames. However, 802.1Q also designates a single native VLAN per trunk link to handle frames that traverse the connection without a VLAN tag. By factory default, Cisco switches assign VLAN 1 as... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:52:41+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html","name":"How to Change Native VLAN on Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:52:41+00:00","dateModified":"2026-11-16T02:52:41+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change Native VLAN on Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change Native VLAN on Cisco Switch","datePublished":"2026-11-16T02:52:41+00:00","dateModified":"2026-11-16T02:52:41+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#webpage"},"wordCount":1377,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-on-cisco-switch_24487.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24487"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24487"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24487\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24487"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24487"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24487"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}