{"id":24486,"date":"2026-11-16T10:51:03","date_gmt":"2026-11-16T02:51:03","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html"},"modified":"2026-11-16T10:51:03","modified_gmt":"2026-11-16T02:51:03","slug":"how-to-change-native-vlan-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html","title":{"rendered":"How to Change the Native VLAN on a Cisco Switch"},"content":{"rendered":"<p>In an IEEE 802.1Q trunking environment, the native VLAN designates which virtual local area network handles untagged traffic passing across an inter-switch link. By default, Cisco Catalyst switches assign VLAN 1 as the native VLAN across all switchports and trunk links. While functional out of the box, leaving this default intact presents substantial security liabilities and operational hazards. <\/p>\n<p>Hardening layer 2 infrastructure requires network administrators to reassign the native VLAN to an isolated, unused VLAN ID across all trunk connections. This guide covers the security rationale for changing VLAN 1, the core IEEE 802.1Q architectural rules, the exact Cisco IOS\/IOS-XE configuration commands, verification templates, native VLAN tagging mechanisms, and methods for resolving common trunk mismatches.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Security_Considerations_Why_Change_Default_Native_VLAN_1\" title=\"Security Considerations: Why Change Default Native VLAN 1?\">Security Considerations: Why Change Default Native VLAN 1?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Cisco_Catalyst_VLAN_Trunking_Specifications_and_Reference_Rules\" title=\"Cisco Catalyst VLAN Trunking Specifications and Reference Rules\">Cisco Catalyst VLAN Trunking Specifications and Reference Rules<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step-by-Step_Guide_Configuring_the_Native_VLAN_on_a_Trunk_Port\" title=\"Step-by-Step Guide: Configuring the Native VLAN on a Trunk Port\">Step-by-Step Guide: Configuring the Native VLAN on a Trunk Port<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_1_Create_the_Dedicated_Native_VLAN\" title=\"Step 1: Create the Dedicated Native VLAN\">Step 1: Create the Dedicated Native VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_2_Access_the_Target_Trunk_Interface\" title=\"Step 2: Access the Target Trunk Interface\">Step 2: Access the Target Trunk Interface<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_3_Validate_Trunk_Mode_and_Encapsulation\" title=\"Step 3: Validate Trunk Mode and Encapsulation\">Step 3: Validate Trunk Mode and Encapsulation<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_4_Apply_the_Native_VLAN_Modification\" title=\"Step 4: Apply the Native VLAN Modification\">Step 4: Apply the Native VLAN Modification<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_5_Mirror_Configuration_on_the_Remote_Switch\" title=\"Step 5: Mirror Configuration on the Remote Switch\">Step 5: Mirror Configuration on the Remote Switch<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_6_Save_the_Running_Configuration\" title=\"Step 6: Save the Running Configuration\">Step 6: Save the Running Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Verifying_Trunk_Port_Native_VLAN_Configuration_CLI_Templates\" title=\"Verifying Trunk Port Native VLAN Configuration: CLI Templates\">Verifying Trunk Port Native VLAN Configuration: CLI Templates<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Verification_Template_1_show_interfaces_trunk\" title=\"Verification Template 1: show interfaces trunk\">Verification Template 1: show interfaces trunk<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Verification_Template_2_show_interfaces_switchport\" title=\"Verification Template 2: show interfaces &lt;interface_id&gt; switchport\">Verification Template 2: show interfaces &lt;interface_id&gt; switchport<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Enforcing_8021Q_Tagging_on_Native_VLAN_Traffic\" title=\"Enforcing 802.1Q Tagging on Native VLAN Traffic\">Enforcing 802.1Q Tagging on Native VLAN Traffic<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_1_Verify_System_Support\" title=\"Step 1: Verify System Support\">Step 1: Verify System Support<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_2_Enable_Global_Native_8021Q_Tagging\" title=\"Step 2: Enable Global Native 802.1Q Tagging\">Step 2: Enable Global Native 802.1Q Tagging<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_3_Configure_Per-Interface_Tagging_Platform-Dependent\" title=\"Step 3: Configure Per-Interface Tagging (Platform-Dependent)\">Step 3: Configure Per-Interface Tagging (Platform-Dependent)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_4_Verify_Native_VLAN_Tagging_Status\" title=\"Step 4: Verify Native VLAN Tagging Status\">Step 4: Verify Native VLAN Tagging Status<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Diagnosing_and_Resolving_CDP-4-NATIVE_VLAN_MISMATCH_Errors\" title=\"Diagnosing and Resolving CDP-4-NATIVE_VLAN_MISMATCH Errors\">Diagnosing and Resolving CDP-4-NATIVE_VLAN_MISMATCH Errors<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_1_Analyze_the_Error_Message\" title=\"Step 1: Analyze the Error Message\">Step 1: Analyze the Error Message<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_2_Check_STP_Inconsistent_Port_States\" title=\"Step 2: Check STP Inconsistent Port States\">Step 2: Check STP Inconsistent Port States<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_3_Align_Native_VLAN_Configurations_Across_the_Trunk\" title=\"Step 3: Align Native VLAN Configurations Across the Trunk\">Step 3: Align Native VLAN Configurations Across the Trunk<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\/#Step_4_Confirm_Resolution\" title=\"Step 4: Confirm Resolution\">Step 4: Confirm Resolution<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Security_Considerations_Why_Change_Default_Native_VLAN_1\"><\/span>Security Considerations: Why Change Default Native VLAN 1?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><strong>Q: What inherent security vulnerabilities exist when leaving the native VLAN set to default VLAN 1?<\/strong><br \/>\nA: Cisco switches utilize VLAN 1 as the default administrative, management, and transit subnet for factory-default configurations. Uncompressed control plane protocols\u2014including Cisco Discovery Protocol (CDP), VLAN Trunking Protocol (VTP), Port Aggregation Protocol (PAgP), and Dynamic Trunking Protocol (DTP)\u2014transmit across VLAN 1 by default. If untagged user data shares this same broadcast domain, malicious actors connected to unhardened access ports can more easily target internal network management interfaces, intercept control traffic, or orchestrate denial-of-service attacks against switch supervisor engines.<\/p>\n<p><strong>Q: How does default native VLAN configuration facilitate VLAN hopping via double-tagging?<\/strong><br \/>\nA: An 802.1Q double-tagging attack exploits the default behavior where native VLAN traffic traverses a trunk port untagged. An attacker sends a frame containing two separate 802.1Q headers: an outer tag matching the trunk&#8217;s native VLAN (typically VLAN 1) and an inner tag matching the targeted victim VLAN. When the ingress switch receives this frame on an access port that shares the native VLAN ID, it forwards the frame across the trunk after stripping the outer tag. Because the outer tag was stripped, the frame arrives at the downstream switch bearing only the inner tag. The destination switch reads this remaining tag and forwards the frame directly into the victim&#8217;s VLAN. This unidirectional breach bypasses Layer 3 inspection firewalls and access control lists (ACLs).<\/p>\n<p><strong>Q: What is the recognized best practice for native VLAN assignment?<\/strong><br \/>\nA: Network security frameworks (such as the DISA Network Infrastructure STIG and Cisco Hardening Guides) mandate assigning the native VLAN to a dedicated, unrouted &#8220;dummy&#8221; VLAN ID (such as VLAN 999 or VLAN 1002) that carries zero user or management traffic. No physical access ports should ever be mapped to this VLAN, and the subnet should not be configured with a Switch Virtual Interface (SVI) on any Layer 3 device.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Catalyst_VLAN_Trunking_Specifications_and_Reference_Rules\"><\/span>Cisco Catalyst VLAN Trunking Specifications and Reference Rules<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>According to the Cisco Catalyst and IOS-XE VLAN Trunking architectural specifications, 802.1Q encapsulation adheres to strict operational parameters:<\/p>\n<ul>\n<li><strong>Frame Encapsulation:<\/strong> An IEEE 802.1Q frame inserts a 4-byte tag into the standard Ethernet header containing a Tag Protocol Identifier (TPID 0x8100) and Tag Control Information (TCI, comprising Priority, DEI, and the 12-bit VLAN Identifier).<\/li>\n<li><strong>Native VLAN Forwarding:<\/strong> When a frame belonging to the configured native VLAN is forwarded across an 802.1Q trunk, the switch transmits it without the 4-byte 802.1Q tag header unless explicit native VLAN tagging is enabled globally.<\/li>\n<li><strong>Ingress Untagged Frame Processing:<\/strong> Any untagged or priority-tagged (VLAN 0) frame arriving at an 802.1Q trunk interface is immediately assigned to the interface&#8217;s configured native VLAN.<\/li>\n<li><strong>Symmetry Constraint:<\/strong> Both endpoints of an active 802.1Q trunk link must share an identical native VLAN ID. Asymmetrical assignments trigger protocol guards within Spanning Tree Protocol (STP) and CDP.<\/li>\n<li><strong>Valid Range:<\/strong> The native VLAN must be a valid, operational VLAN configured within the normal (1\u20131005) or extended (1006\u20134094) range on platforms operating in VTP transparent mode or VTP version 3.<\/li>\n<\/ul>\n<pre><code>+--------------------------------------------------------------------------------+\n| Command \/ Parameter              | Default Value | Supported Context           |\n+----------------------------------+---------------+-----------------------------+\n| switchport trunk native vlan &lt;id&gt;| VLAN 1        | Interface \/ Port-Channel    |\n| vlan dot1q tag native            | Disabled      | Global Configuration        |\n| switchport trunk native vlan tag | Disabled      | Interface (Select IOS-XE)   |\n+----------------------------------+---------------+-----------------------------+\n<\/code><\/pre>\n<p>With these architectural rules defined, administrators can proceed to execute the native VLAN modification across active links.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_Configuring_the_Native_VLAN_on_a_Trunk_Port\"><\/span>Step-by-Step Guide: Configuring the Native VLAN on a Trunk Port<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Follow these sequential steps to modify the native VLAN on a physical interface or an EtherChannel port-channel interface using the Cisco IOS\/IOS-XE command-line interface (CLI).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Create_the_Dedicated_Native_VLAN\"><\/span>Step 1: Create the Dedicated Native VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Before assigning a new native VLAN to a trunk link, create the target VLAN within the local switch database.<\/p>\n<pre><code class=\"language-text\">Switch-A# configure terminal\nSwitch-A(config)# vlan 999\nSwitch-A(config-vlan)# name NATIVE_DUMMY_VLAN\nSwitch-A(config-vlan)# state active\nSwitch-A(config-vlan)# no shutdown\nSwitch-A(config-vlan)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Access_the_Target_Trunk_Interface\"><\/span>Step 2: Access the Target Trunk Interface<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Navigate to the interface or port-channel linking the two switches.<\/p>\n<pre><code class=\"language-text\">Switch-A(config)# interface GigabitEthernet0\/1\n<\/code><\/pre>\n<p><em>(Note: If configuring an EtherChannel link, apply this command directly to the logical port-channel interface, e.g., <code>interface Port-channel 1<\/code>, to ensure uniform propagation across all member links.)<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Validate_Trunk_Mode_and_Encapsulation\"><\/span>Step 3: Validate Trunk Mode and Encapsulation<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Confirm that the interface is statically defined as an 802.1Q trunk.<\/p>\n<pre><code class=\"language-text\">Switch-A(config-if)# switchport trunk encapsulation dot1q\nSwitch-A(config-if)# switchport mode trunk\n<\/code><\/pre>\n<p><em>(Note: The <code>switchport trunk encapsulation dot1q<\/code> command is automatically applied or omitted on newer Cisco Catalyst switches that exclusively support 802.1Q.)<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Apply_the_Native_VLAN_Modification\"><\/span>Step 4: Apply the Native VLAN Modification<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Set the designated native VLAN ID on the interface.<\/p>\n<pre><code class=\"language-text\">Switch-A(config-if)# switchport trunk native vlan 999\nSwitch-A(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Mirror_Configuration_on_the_Remote_Switch\"><\/span>Step 5: Mirror Configuration on the Remote Switch<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Because the native VLAN must match at both endpoints, access the interconnected switch immediately to apply identical settings.<\/p>\n<pre><code class=\"language-text\">Switch-B# configure terminal\nSwitch-B(config)# vlan 999\nSwitch-B(config-vlan)# name NATIVE_DUMMY_VLAN\nSwitch-B(config-vlan)# exit\nSwitch-B(config)# interface GigabitEthernet0\/1\nSwitch-B(config-if)# switchport mode trunk\nSwitch-B(config-if)# switchport trunk native vlan 999\nSwitch-B(config-if)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_6_Save_the_Running_Configuration\"><\/span>Step 6: Save the Running Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Commit the configuration changes to non-volatile RAM (NVRAM) on both devices.<\/p>\n<pre><code class=\"language-text\">Switch-A# copy running-config startup-config\nSwitch-B# copy running-config startup-config\n<\/code><\/pre>\n<h2><span class=\"ez-toc-section\" id=\"Verifying_Trunk_Port_Native_VLAN_Configuration_CLI_Templates\"><\/span>Verifying Trunk Port Native VLAN Configuration: CLI Templates<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use the following CLI commands and output reference templates to confirm that the native VLAN is active and operational.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Verification_Template_1_show_interfaces_trunk\"><\/span>Verification Template 1: <code>show interfaces trunk<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This command provides a concise table displaying all operational trunks and their active native VLAN mappings.<\/p>\n<pre><code class=\"language-text\">Switch-A# show interfaces trunk\n\nPort        Mode             Encapsulation  Status        Native vlan\nGi0\/1       on               802.1q         trunking      999\n\nPort        Vlans allowed on trunk\nGi0\/1       1-4094\n\nPort        Vlans allowed and active in management domain\nGi0\/1       10,20,30,999\n\nPort        Vlans in spanning tree forwarding state and not pruned\nGi0\/1       10,20,30,999\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Verification_Template_2_show_interfaces_switchport\"><\/span>Verification Template 2: <code>show interfaces &lt;interface_id&gt; switchport<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This command inspects administrative and operational parameters for a specific interface.<\/p>\n<pre><code class=\"language-text\">Switch-A# show interfaces GigabitEthernet0\/1 switchport\nName: Gi0\/1\nSwitchport: Enabled\nAdministrative Mode: trunk\nOperational Mode: trunk\nAdministrative Trunking Encapsulation: dot1q\nOperational Trunking Encapsulation: dot1q\nNegotiation of Trunking: Off\nAccess Mode VLAN: 1 (default)\nTrunking Native Mode VLAN: 999 (NATIVE_DUMMY_VLAN)\nAdministrative Native VLAN tagging: disabled\nVoice VLAN: none\nAdministrative private-vlan host-association: none\nTrunking VLANs Enabled: ALL\nPruning VLANs Enabled: 2-1001\nCapture Mode Disabled\nCapture VLANs Allowed: ALL\n<\/code><\/pre>\n<p>Once the trunk interface reports the expected native VLAN ID under both operational and administrative headers, the baseline configuration is complete.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Enforcing_8021Q_Tagging_on_Native_VLAN_Traffic\"><\/span>Enforcing 802.1Q Tagging on Native VLAN Traffic<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Modifying the native VLAN away from VLAN 1 mitigates basic reconnaissance, but untagged transit frames remain an inherent risk across trunks. To close this attack surface entirely, configure Cisco switches to explicitly tag native VLAN traffic with an 802.1Q header.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Verify_System_Support\"><\/span>Step 1: Verify System Support<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Native VLAN tagging is supported across Cisco IOS, IOS-XE, and NX-OS architectures. Check global switch readiness by entering global configuration mode.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Enable_Global_Native_8021Q_Tagging\"><\/span>Step 2: Enable Global Native 802.1Q Tagging<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Execute the global command to force all 802.1Q trunk ports on the switch to apply an 802.1Q header to native VLAN frames:<\/p>\n<pre><code class=\"language-text\">Switch-A(config)# vlan dot1q tag native\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Configure_Per-Interface_Tagging_Platform-Dependent\"><\/span>Step 3: Configure Per-Interface Tagging (Platform-Dependent)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>On modern Cisco Catalyst 9000-series switches running IOS-XE, you can override or specify native VLAN tagging on individual interfaces rather than globally:<\/p>\n<pre><code class=\"language-text\">Switch-A(config)# interface GigabitEthernet0\/1\nSwitch-A(config-if)# switchport trunk native vlan tag\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Verify_Native_VLAN_Tagging_Status\"><\/span>Step 4: Verify Native VLAN Tagging Status<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Verify that native VLAN tagging is operationally active.<\/p>\n<pre><code class=\"language-text\">Switch-A# show vlan dot1q tag native\nvlan dot1q tag native is enabled\n\nSwitch-A# show interfaces GigabitEthernet0\/1 switchport | include tagging\nAdministrative Native VLAN tagging: enabled\nOperational Native VLAN tagging: enabled\n<\/code><\/pre>\n<p><em>Operational Caution:<\/em> When <code>vlan dot1q tag native<\/code> is activated on one side of a trunk, the connecting switch must also support and enforce native tagging. If one switch sends tagged native frames while the peer expects untagged frames, connectivity disruptions will occur for that specific VLAN.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Diagnosing_and_Resolving_CDP-4-NATIVE_VLAN_MISMATCH_Errors\"><\/span>Diagnosing and Resolving CDP-4-NATIVE_VLAN_MISMATCH Errors<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When native VLAN values differ between two connected trunk ports, Cisco switches detect the discrepancy using CDP and Spanning Tree Protocol, generating recurring console warnings.<\/p>\n<pre><code class=\"language-text\">%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0\/1 (999), with Switch-B GigabitEthernet0\/1 (1).\n%SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 1 on GigabitEthernet0\/1 VLAN999.\n%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking GigabitEthernet0\/1 on VLAN0999. Inconsistent local vlan.\n<\/code><\/pre>\n<p>Follow this sequence to diagnose and resolve these errors:<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Analyze_the_Error_Message\"><\/span>Step 1: Analyze the Error Message<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Parse the syslog output to isolate the affected components:<br \/>\n*   <strong>Local Interface:<\/strong> <code>GigabitEthernet0\/1<\/code><br \/>\n*   <strong>Local Native VLAN:<\/strong> <code>999<\/code><br \/>\n*   <strong>Remote Device Name:<\/strong> <code>Switch-B<\/code><br \/>\n*   <strong>Remote Interface:<\/strong> <code>GigabitEthernet0\/1<\/code><br \/>\n*   <strong>Remote Native VLAN:<\/strong> <code>1<\/code><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Check_STP_Inconsistent_Port_States\"><\/span>Step 2: Check STP Inconsistent Port States<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Spanning Tree automatically places mismatched VLANs into a Type Inconsistent \/ Port VLAN ID (PVID) inconsistent state to prevent Layer 2 loops. Confirm this with:<\/p>\n<pre><code class=\"language-text\">Switch-A# show spanning-tree inconsistentports\n\nName                 Interface            Inconsistency\n-------------------- -------------------- ------------------\nVLAN0999             GigabitEthernet0\/1   Port Vlan ID Inconsistency\n\nNumber of inconsistent ports is 1\n<\/code><\/pre>\n<p>While the port remains in this inconsistent state, frames for the conflicting VLANs are dropped.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Align_Native_VLAN_Configurations_Across_the_Trunk\"><\/span>Step 3: Align Native VLAN Configurations Across the Trunk<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Log in to the switch reporting the incorrect native VLAN (in this case, <code>Switch-B<\/code>) and update the interface configuration:<\/p>\n<pre><code class=\"language-text\">Switch-B(config)# interface GigabitEthernet0\/1\nSwitch-B(config-if)# switchport trunk native vlan 999\nSwitch-B(config-if)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Confirm_Resolution\"><\/span>Step 4: Confirm Resolution<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Within 60 seconds (the default CDP transmission interval), the spanning tree state clears automatically, unblocking the link:<\/p>\n<pre><code class=\"language-text\">%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet0\/1 on VLAN0999. Port consistency restored.\n<\/code><\/pre>\n<p>Re-run verification commands to ensure no inconsistent ports remain:<\/p>\n<pre><code class=\"language-text\">Switch-A# show spanning-tree inconsistentports\n\nName                 Interface            Inconsistency\n-------------------- -------------------- ------------------\n\nNumber of inconsistent ports is 0\n<\/code><\/pre>\n<p>Changing the native VLAN on a Cisco switch is an essential hardening step for any Layer 2 network. By moving the native VLAN away from default VLAN 1, assigning it to an unused, unrouted dummy VLAN, keeping both ends of the trunk aligned, and enforcing explicit 802.1Q tagging, you protect your switches from common Layer 2 exploits like VLAN hopping and keep your control plane traffic secure.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-native-vlan-cisco-switch_24486.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+the+Native+VLAN+on+a+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\",\"How to Change the Native VLAN on a Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>In an IEEE 802.1Q trunking environment, the native VLAN designates which virtual local area network handles untagged traffic passing across an inter-switch link. By default, Cisco Catalyst switches assign VLAN 1 as the native VLAN across all switchports and trunk links. While functional out of the box, leaving this default intact presents substantial security liabilities&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change the Native VLAN on a Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change the Native VLAN on a Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"In an IEEE 802.1Q trunking environment, the native VLAN designates which virtual local area network handles untagged traffic passing across an inter-switch link. By default, Cisco Catalyst switches assign VLAN 1 as the native VLAN across all switchports and trunk links. While functional out of the box, leaving this default intact presents substantial security liabilities... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:51:03+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\",\"name\":\"How to Change the Native VLAN on a Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:51:03+00:00\",\"dateModified\":\"2026-11-16T02:51:03+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change the Native VLAN on a Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change the Native VLAN on a Cisco Switch\",\"datePublished\":\"2026-11-16T02:51:03+00:00\",\"dateModified\":\"2026-11-16T02:51:03+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#webpage\"},\"wordCount\":1315,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change the Native VLAN on a Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html","og_locale":"en_US","og_type":"article","og_title":"How to Change the Native VLAN on a Cisco Switch - SPOTO Official Blog","og_description":"In an IEEE 802.1Q trunking environment, the native VLAN designates which virtual local area network handles untagged traffic passing across an inter-switch link. By default, Cisco Catalyst switches assign VLAN 1 as the native VLAN across all switchports and trunk links. While functional out of the box, leaving this default intact presents substantial security liabilities... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:51:03+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html","name":"How to Change the Native VLAN on a Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:51:03+00:00","dateModified":"2026-11-16T02:51:03+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change the Native VLAN on a Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change the Native VLAN on a Cisco Switch","datePublished":"2026-11-16T02:51:03+00:00","dateModified":"2026-11-16T02:51:03+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#webpage"},"wordCount":1315,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-native-vlan-cisco-switch_24486.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24486"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24486"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24486\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24486"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24486"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24486"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}