{"id":24485,"date":"2026-11-16T10:49:30","date_gmt":"2026-11-16T02:49:30","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html"},"modified":"2026-11-16T10:49:30","modified_gmt":"2026-11-16T02:49:30","slug":"how-to-change-password-on-cisco-router-username","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html","title":{"rendered":"How to Change Password on Cisco Router Username"},"content":{"rendered":"<p>Maintaining administrative control over network infrastructure begins with disciplined credential management. Whether performing routine security rotations, adjusting access privileges for network engineers, or replacing stale passwords on legacy equipment, updating local credentials in Cisco IOS and IOS-XE is a foundational operational task. <\/p>\n<p>While changing a local user&#8217;s password on a Cisco router requires only a few commands in the command-line interface (CLI), executing the change correctly requires an understanding of privilege levels, cryptographic hashing standards, and line security. Furthermore, administrators must know how to recover access if a password is forgotten and understand when an organization should transition from individual device accounts to centralized authentication architectures.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step-by-Step_Guide_Updating_a_Local_Username_and_Password_via_CLI\" title=\"Step-by-Step Guide: Updating a Local Username and Password via CLI\">Step-by-Step Guide: Updating a Local Username and Password via CLI<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Prerequisites\" title=\"Prerequisites\">Prerequisites<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_1_Enter_Privileged_EXEC_Mode\" title=\"Step 1: Enter Privileged EXEC Mode\">Step 1: Enter Privileged EXEC Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_2_Enter_Global_Configuration_Mode\" title=\"Step 2: Enter Global Configuration Mode\">Step 2: Enter Global Configuration Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_3_Overwrite_the_Username_and_Password\" title=\"Step 3: Overwrite the Username and Password\">Step 3: Overwrite the Username and Password<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_4_Verify_the_Updated_Configuration\" title=\"Step 4: Verify the Updated Configuration\">Step 4: Verify the Updated Configuration<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_5_Save_the_Configuration_to_NVRAM\" title=\"Step 5: Save the Configuration to NVRAM\">Step 5: Save the Configuration to NVRAM<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Frequently_Asked_Questions_Understanding_password_vs_secret_and_Hashing_Types\" title=\"Frequently Asked Questions: Understanding password vs. secret and Hashing Types\">Frequently Asked Questions: Understanding password vs. secret and Hashing Types<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#What_is_the_technical_difference_between_the_password_and_secret_keywords\" title=\"What is the technical difference between the password and secret keywords?\">What is the technical difference between the password and secret keywords?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#What_do_Cisco_password_encryption_types_Type_0_7_5_8_9_mean\" title=\"What do Cisco password encryption types (Type 0, 7, 5, 8, 9) mean?\">What do Cisco password encryption types (Type 0, 7, 5, 8, 9) mean?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Why_is_service_password-encryption_insufficient_for_enterprise_security\" title=\"Why is service password-encryption insufficient for enterprise security?\">Why is service password-encryption insufficient for enterprise security?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Which_password_algorithm_should_administrators_use\" title=\"Which password algorithm should administrators use?\">Which password algorithm should administrators use?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Configuration_Template_Secure_Local_User_Provisioning_with_SSH\" title=\"Configuration Template: Secure Local User Provisioning with SSH\">Configuration Template: Secure Local User Provisioning with SSH<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Disaster_Recovery_Guide_Resetting_Passwords_via_ROMMON_Without_Losing_Configuration\" title=\"Disaster Recovery Guide: Resetting Passwords via ROMMON Without Losing Configuration\">Disaster Recovery Guide: Resetting Passwords via ROMMON Without Losing Configuration<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_1_Establish_a_Physical_Console_Connection\" title=\"Step 1: Establish a Physical Console Connection\">Step 1: Establish a Physical Console Connection<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_2_Interrupt_the_Router_Boot_Sequence\" title=\"Step 2: Interrupt the Router Boot Sequence\">Step 2: Interrupt the Router Boot Sequence<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_3_Instruct_the_Router_to_Ignore_the_Startup_Configuration\" title=\"Step 3: Instruct the Router to Ignore the Startup Configuration\">Step 3: Instruct the Router to Ignore the Startup Configuration<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_4_Bypass_the_Initial_Setup_Dialog_and_Merge_Configuration\" title=\"Step 4: Bypass the Initial Setup Dialog and Merge Configuration\">Step 4: Bypass the Initial Setup Dialog and Merge Configuration<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_5_Overwrite_the_Password_and_Restore_Interfaces\" title=\"Step 5: Overwrite the Password and Restore Interfaces\">Step 5: Overwrite the Password and Restore Interfaces<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Step_6_Commit_Repaired_Configuration\" title=\"Step 6: Commit Repaired Configuration\">Step 6: Commit Repaired Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Official_Cisco_Architecture_Standards_and_Command_Reference\" title=\"Official Cisco Architecture Standards and Command Reference\">Official Cisco Architecture Standards and Command Reference<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Formal_Command_Syntax\" title=\"Formal Command Syntax\">Formal Command Syntax<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Architectural_Limitations_of_the_Local_User_Database\" title=\"Architectural Limitations of the Local User Database\">Architectural Limitations of the Local User Database<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Centralized_AAA_vs_Local_Authentication_Architectural_Comparison\" title=\"Centralized AAA vs. Local Authentication: Architectural Comparison\">Centralized AAA vs. Local Authentication: Architectural Comparison<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_Updating_a_Local_Username_and_Password_via_CLI\"><\/span>Step-by-Step Guide: Updating a Local Username and Password via CLI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Updating a user\u2019s password in Cisco IOS does not require deleting the account. The Cisco IOS parser processes <code>username<\/code> statements idempotently: entering a new <code>username<\/code> command with an existing username immediately overwrites the stored password and privilege attributes associated with that account.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Prerequisites\"><\/span>Prerequisites<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>Access to the router via a direct serial console connection, Telnet, or SSH.<\/li>\n<li>An existing account with Privileged EXEC mode access (Privilege Level 15).<\/li>\n<\/ul>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Enter_Privileged_EXEC_Mode\"><\/span>Step 1: Enter Privileged EXEC Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Log in to the router. If your session lands in user EXEC mode (indicated by a <code>&gt;<\/code> prompt), elevate your privileges using the <code>enable<\/code> command:<\/p>\n<pre><code class=\"language-text\">Router&gt; enable\nPassword: *********\nRouter#\n<\/code><\/pre>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Enter_Global_Configuration_Mode\"><\/span>Step 2: Enter Global Configuration Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Modifications to the local user database must be made in global configuration mode:<\/p>\n<pre><code class=\"language-text\">Router# configure terminal\nEnter configuration commands, one per line.  End with CNTL\/Z.\nRouter(config)#\n<\/code><\/pre>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Overwrite_the_Username_and_Password\"><\/span>Step 3: Overwrite the Username and Password<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enter the <code>username<\/code> command, followed by the target username, the desired privilege level, and the <code>secret<\/code> keyword followed by the new password. <\/p>\n<pre><code class=\"language-text\">Router(config)# username admin privilege 15 secret CorrectHorseBatteryStaple!\n<\/code><\/pre>\n<ul>\n<li><strong><code>admin<\/code><\/strong>: The target account username (case-sensitive in modern IOS-XE versions).<\/li>\n<li><strong><code>privilege 15<\/code><\/strong>: Grants full administrative rights, bypassing the need for a secondary <code>enable<\/code> password to configure the router.<\/li>\n<li><strong><code>secret<\/code><\/strong>: Instructs IOS to hash the password before writing it to NVRAM.<\/li>\n<\/ul>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Verify_the_Updated_Configuration\"><\/span>Step 4: Verify the Updated Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Return to privileged EXEC mode and inspect the running configuration filtered by the username:<\/p>\n<pre><code class=\"language-text\">Router(config)# do show running-config | include username\nusername admin privilege 15 secret 9 $9$vD8e...\n<\/code><\/pre>\n<p>Verify that the account exists with the intended privilege level and that the output displays a hashed string rather than plaintext.<\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Save_the_Configuration_to_NVRAM\"><\/span>Step 5: Save the Configuration to NVRAM<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Changes made in <code>configure terminal<\/code> reside only in volatile RAM (<code>running-config<\/code>). To ensure the new password persists across reboots, commit the changes to NVRAM:<\/p>\n<pre><code class=\"language-text\">Router# copy running-config startup-config\nDestination filename [startup-config]? [Enter]\nBuilding configuration...\n[OK]\n<\/code><\/pre>\n<p>Alternatively, the legacy shorthand <code>write memory<\/code> executes the same function.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions_Understanding_password_vs_secret_and_Hashing_Types\"><\/span>Frequently Asked Questions: Understanding <code>password<\/code> vs. <code>secret<\/code> and Hashing Types<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"What_is_the_technical_difference_between_the_password_and_secret_keywords\"><\/span>What is the technical difference between the <code>password<\/code> and <code>secret<\/code> keywords?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When configuring local user accounts, Cisco IOS accepts either <code>username &lt;name&gt; password &lt;string&gt;<\/code> or <code>username &lt;name&gt; secret &lt;string&gt;<\/code>. <\/p>\n<p>The <code>password<\/code> keyword historically stores the string in cleartext (Type 0). Even if the global command <code>service password-encryption<\/code> is enabled, the password is only masked using Cisco&#8217;s proprietary Type 7 encoding\u2014a simple Vigen\u00e8re-cipher variant that can be decrypted in milliseconds using widely available tools.<\/p>\n<p>The <code>secret<\/code> keyword forces the router to pass the plaintext string through a one-way cryptographic hash function before storing it. The router never writes the plaintext string to memory or storage.<\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"What_do_Cisco_password_encryption_types_Type_0_7_5_8_9_mean\"><\/span>What do Cisco password encryption types (Type 0, 7, 5, 8, 9) mean?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Type 0 (Plaintext):<\/strong> Unencrypted, readable text stored directly in the configuration file.<\/li>\n<li><strong>Type 7 (Proprietary Obfuscation):<\/strong> A weak XOR-based masking algorithm. It prevents casual &#8220;over-the-shoulder&#8221; viewing of configuration files, but provides zero cryptographic defense against unauthorized decryption.<\/li>\n<li><strong>Type 5 (MD5):<\/strong> A one-way hash algorithm based on MD5 with a salt. While far superior to Type 7, modern GPU computing clusters can crack Type 5 hashes via brute-force and dictionary attacks.<\/li>\n<li><strong>Type 8 (PBKDF2 with SHA-256):<\/strong> Introduced in Cisco IOS 15.3(3)M and IOS-XE 3.10S. It applies a Password-Based Key Derivation Function with a SHA-256 HMAC and high iteration counts, offering robust resistance against brute-force attacks.<\/li>\n<li><strong>Type 9 (Scrypt):<\/strong> A memory-hard hash function designed specifically to thwart hardware-accelerated attacks (such as ASICs and GPUs). Type 9 is the strongest hashing mechanism natively supported in modern Cisco platforms.<\/li>\n<\/ul>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Why_is_service_password-encryption_insufficient_for_enterprise_security\"><\/span>Why is <code>service password-encryption<\/code> insufficient for enterprise security?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The <code>service password-encryption<\/code> command applies only Type 7 encoding to plaintext passwords found in commands like <code>password<\/code> or <code>enable password<\/code>. Because Type 7 is a reversible cipher rather than a hash, anyone who obtains a copy of your configuration file through TFTP snooping, backup repository compromises, or shoulder surfing can reverse the cipher back to cleartext instantly.<\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Which_password_algorithm_should_administrators_use\"><\/span>Which password algorithm should administrators use?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Whenever supported by the platform, administrators should configure Type 9 (scrypt) or Type 8 (SHA-256) hashes explicitly:<\/p>\n<pre><code class=\"language-text\">Router(config)# username admin privilege 15 algorithm-type scrypt secret Str0ngP@ssw0rd!\n<\/code><\/pre>\n<p>If the legacy software image does not support <code>algorithm-type<\/code>, the standard <code>secret<\/code> keyword defaults to Type 5 (MD5), which remains considerably safer than Type 7.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Configuration_Template_Secure_Local_User_Provisioning_with_SSH\"><\/span>Configuration Template: Secure Local User Provisioning with SSH<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To put these credential parameters into practice, the following production template configures an administrative local account, disables insecure Telnet, generates 2048-bit RSA keys, and restricts console and virtual terminal (VTY) access strictly to local database authentication over SSH Version 2.<\/p>\n<pre><code class=\"language-cisco\">! ====================================================================\n! Cisco IOS \/ IOS-XE Production Local Administrator &amp; SSH Template\n! ====================================================================\n\nconfigure terminal\n\n! 1. Define device naming context (required for RSA key generation)\nhostname R1-CORE\nip domain-name enterprise.internal\n\n! 2. Generate RSA key pair for SSH negotiation (2048-bit minimum)\ncrypto key generate rsa modulus 2048\n\n! 3. Enforce SSH Version 2 and set basic connection boundaries\nip ssh version 2\nip ssh time-out 60\nip ssh authentication-retries 3\n\n! 4. Create primary administrative user using Type 9 (Scrypt) hashing\nusername admin privilege 15 algorithm-type scrypt secret C1sc0$ecure2026!\n\n! 5. Secure Virtual Terminal (VTY) lines (Telnet blocked, SSH required)\nline vty 0 4\n exec-timeout 10 0\n logging synchronous\n login local\n transport input ssh\nline vty 5 15\n exec-timeout 10 0\n logging synchronous\n login local\n transport input ssh\n\n! 6. Secure auxiliary and console lines with local database validation\nline con 0\n exec-timeout 15 0\n logging synchronous\n login local\n\nline aux 0\n no exec\n\n! 7. Commit changes to persistent storage\nend\nwrite memory\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Disaster_Recovery_Guide_Resetting_Passwords_via_ROMMON_Without_Losing_Configuration\"><\/span>Disaster Recovery Guide: Resetting Passwords via ROMMON Without Losing Configuration<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>If the administrative password is lost or an administrator is completely locked out of the router, credentials can be reset through physical console access using the ROM Monitor (ROMMON) recovery procedure. This process alters the configuration register to bypass the startup configuration during boot, allowing the password to be overwritten without erasing existing network parameters.<\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Establish_a_Physical_Console_Connection\"><\/span>Step 1: Establish a Physical Console Connection<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Connect a serial rollover cable from your workstation to the router\u2019s RJ-45 or USB console port. Open a terminal emulator configured for standard serial settings:<br \/>\n&#8211; <strong>Baud Rate:<\/strong> 9600 bps<br \/>\n&#8211; <strong>Data Bits:<\/strong> 8<br \/>\n&#8211; <strong>Parity:<\/strong> None<br \/>\n&#8211; <strong>Stop Bits:<\/strong> 1<br \/>\n&#8211; <strong>Flow Control:<\/strong> None<\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Interrupt_the_Router_Boot_Sequence\"><\/span>Step 2: Interrupt the Router Boot Sequence<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ol>\n<li>Power cycle the router (turn the power switch off, wait 10 seconds, then turn it on).<\/li>\n<li>Within the first 60 seconds of booting, send a <strong>Break<\/strong> signal from your terminal emulator (e.g., <code>Ctrl + Break<\/code> in PuTTY or Tera Term).<\/li>\n<li>The boot sequence aborts, dropping the console into the ROMMON prompt:<br \/>\n   <code>text<br \/>\n   rommon 1 &gt;<\/code><\/li>\n<\/ol>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Instruct_the_Router_to_Ignore_the_Startup_Configuration\"><\/span>Step 3: Instruct the Router to Ignore the Startup Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Instruct the processor to bypass NVRAM during startup by changing the configuration register from its standard value (<code>0x2102<\/code>) to <code>0x2142<\/code>:<\/p>\n<pre><code class=\"language-text\">rommon 1 &gt; confreg 0x2142\nrommon 2 &gt; reset\n<\/code><\/pre>\n<p>The router will reboot, ignoring the stored configuration, and load a blank system image.<\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Bypass_the_Initial_Setup_Dialog_and_Merge_Configuration\"><\/span>Step 4: Bypass the Initial Setup Dialog and Merge Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When the router boots, it will present the initial configuration dialog. Reject it:<\/p>\n<pre><code class=\"language-text\">Would you like to enter the initial configuration dialog? [yes\/no]: no\nRouter&gt;\n<\/code><\/pre>\n<p>Enter privileged EXEC mode (no password will be prompted):<\/p>\n<pre><code class=\"language-text\">Router&gt; enable\nRouter#\n<\/code><\/pre>\n<p><strong>Crucial Step:<\/strong> Do <strong>not<\/strong> enter configuration mode and make changes yet. You must load your existing configuration from NVRAM into active memory:<\/p>\n<pre><code class=\"language-text\">Router# copy startup-config running-config\nDestination filename [running-config]? [Enter]\nR1-CORE#\n<\/code><\/pre>\n<p><em>Note: Once this command executes, the router prompt changes back to its configured hostname (<code>R1-CORE#<\/code>), and all interfaces, routing tables, and access lists are preserved.<\/em><\/p>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Overwrite_the_Password_and_Restore_Interfaces\"><\/span>Step 5: Overwrite the Password and Restore Interfaces<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Interfaces loaded from the startup configuration remain in an administratively down state to prevent routing loops during recovery. Re-enter global configuration mode, reset the administrative password, re-enable interfaces, and restore the configuration register to normal operation (<code>0x2102<\/code>):<\/p>\n<pre><code class=\"language-text\">R1-CORE# configure terminal\nR1-CORE(config)# username admin privilege 15 algorithm-type scrypt secret NewRecoveryP@ss2026!\nR1-CORE(config)# config-register 0x2102\nR1-CORE(config)# interface GigabitEthernet0\/0\/0\nR1-CORE(config-if)# no shutdown\nR1-CORE(config-if)# exit\nR1-CORE(config)# exit\n<\/code><\/pre>\n<hr \/>\n<h3><span class=\"ez-toc-section\" id=\"Step_6_Commit_Repaired_Configuration\"><\/span>Step 6: Commit Repaired Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Write the modified configuration containing the new credentials and restored register setting back to NVRAM:<\/p>\n<pre><code class=\"language-text\">R1-CORE# copy running-config startup-config\n[OK]\n<\/code><\/pre>\n<p>The router is now accessible with the new credentials and will boot normally on subsequent restarts.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Official_Cisco_Architecture_Standards_and_Command_Reference\"><\/span>Official Cisco Architecture Standards and Command Reference<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>According to the <em>Cisco IOS Security Configuration Guide: Securing User Services<\/em> and the <em>Cisco IOS Master Command Reference<\/em>, local user management operates under strict structural parameters defined by the system architecture.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Formal_Command_Syntax\"><\/span>Formal Command Syntax<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">username name [privilege level] [algorithm-type {md5 | sha256 | scrypt}] secret secret-value\n<\/code><\/pre>\n<ul>\n<li><strong><code>name<\/code><\/strong>: Case-sensitive string (up to 64 characters on modern IOS versions) identifying the credential holder.<\/li>\n<li><strong><code>privilege level<\/code><\/strong>: An integer ranging from <code>0<\/code> to <code>15<\/code>. <\/li>\n<li><code>0<\/code>: Provides access to only basic operational commands (<code>logout<\/code>, <code>enable<\/code>, <code>exit<\/code>).<\/li>\n<li><code>1<\/code>: Default user EXEC level (read-only diagnostics such as non-privileged <code>ping<\/code> or <code>show<\/code> commands).<\/li>\n<li><code>15<\/code>: Full administrative system privileges (equivalent to root). Levels 2 through 14 can be assigned custom command authorization profiles via the <code>privilege &lt;mode&gt; level &lt;num&gt; &lt;command&gt;<\/code> syntax.<\/li>\n<li><strong><code>algorithm-type<\/code><\/strong>: Designates the key derivation scheme. Omitting this token causes IOS to fall back to the default hashing method configured globally or the platform&#8217;s default (MD5 on older releases).<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Architectural_Limitations_of_the_Local_User_Database\"><\/span>Architectural Limitations of the Local User Database<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco&#8217;s official security architecture frameworks outline clear limitations regarding the local user database:<\/p>\n<ol>\n<li><strong>Scalability Boundaries:<\/strong> Local user definitions are bound to the NVRAM of each specific device. Managing credentials across hundreds of devices results in manual configuration overhead and a higher probability of human error.<\/li>\n<li><strong>Absence of Centralized Accounting:<\/strong> While local accounts can authenticate an administrator and authorize them to privilege level 15, the local database cannot generate granular, real-time command accounting logs showing which commands an engineer executed.<\/li>\n<li><strong>Password Lifecycle Limitations:<\/strong> Local user databases do not provide native password aging, complexity policies, account lockouts after sequential failures, or multi-factor authentication (MFA) without secondary AAA frameworks.<\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Centralized_AAA_vs_Local_Authentication_Architectural_Comparison\"><\/span>Centralized AAA vs. Local Authentication: Architectural Comparison<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>As enterprise networks expand beyond a handful of routing devices, managing standalone passwords across individual hardware endpoints becomes unsustainable. The industry standard replaces or supplements local databases with centralized Authentication, Authorization, and Accounting (AAA) servers running <strong>TACACS+<\/strong> or <strong>RADIUS<\/strong>.<\/p>\n<p>The following comparison details the operational and technical differences between local user management, TACACS+, and RADIUS:<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Comparison Metric<\/th>\n<th style=\"text-align: left;\">Local Router Database<\/th>\n<th style=\"text-align: left;\">TACACS+ (e.g., Cisco ISE)<\/th>\n<th style=\"text-align: left;\">RADIUS (e.g., FreeRADIUS, Microsoft NPS)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Primary Standard \/ RFC<\/strong><\/td>\n<td style=\"text-align: left;\">Proprietary to Cisco IOS NVRAM<\/td>\n<td style=\"text-align: left;\">RFC 8907 (Cisco Origin)<\/td>\n<td style=\"text-align: left;\">RFC 2865 \/ RFC 2866 (IETF Open Standard)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Transport Layer &amp; Ports<\/strong><\/td>\n<td style=\"text-align: left;\">Internal system memory<\/td>\n<td style=\"text-align: left;\">TCP Port 49 (Reliable connection)<\/td>\n<td style=\"text-align: left;\">UDP Ports 1812\/1813 or 1645\/1646<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Packet Encryption<\/strong><\/td>\n<td style=\"text-align: left;\">N\/A (Stored locally)<\/td>\n<td style=\"text-align: left;\"><strong>Entire packet payload<\/strong> encrypted<\/td>\n<td style=\"text-align: left;\">Only the password field is hashed (MD5)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>AAA Architecture<\/strong><\/td>\n<td style=\"text-align: left;\">Monolithic (Authentication couples with Privilege)<\/td>\n<td style=\"text-align: left;\"><strong>Fully Modular:<\/strong> Authenticates, authorizes, and accounts independently<\/td>\n<td style=\"text-align: left;\">Combines Authentication and Authorization into a single response<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Per-Command Authorization<\/strong><\/td>\n<td style=\"text-align: left;\">No (Limited to static privilege levels 0\u201315)<\/td>\n<td style=\"text-align: left;\"><strong>Yes:<\/strong> Validates individual CLI commands on the AAA server in real time<\/td>\n<td style=\"text-align: left;\">No (Practically limited to assigning privilege attributes)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Accounting Granularity<\/strong><\/td>\n<td style=\"text-align: left;\">Minimal (Local syslog events only)<\/td>\n<td style=\"text-align: left;\"><strong>High:<\/strong> Logs every executed command, execution timestamp, and user identity<\/td>\n<td style=\"text-align: left;\">Session-level accounting (start, stop, time, and packets transferred)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Credential Management<\/strong><\/td>\n<td style=\"text-align: left;\">Per-device manual rotation or orchestration<\/td>\n<td style=\"text-align: left;\">Centralized directory integration (Active Directory, LDAP, SAML, MFA)<\/td>\n<td style=\"text-align: left;\">Centralized directory integration (Active Directory, LDAP, 802.1X)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Primary Industry Use Case<\/strong><\/td>\n<td style=\"text-align: left;\">Disaster recovery, emergency out-of-band access<\/td>\n<td style=\"text-align: left;\"><strong>Device Administration (TACACS+ is built for CLI management)<\/strong><\/td>\n<td style=\"text-align: left;\"><strong>Network Access Control (NAC, 802.1X, VPN client authentication)<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Updating an administrative password on a Cisco router is a simple operation using the <code>username &lt;name&gt; privilege 15 secret &lt;password&gt;<\/code> syntax, but doing so securely requires careful attention to cryptographic hashing. Administrators should avoid the vulnerable <code>password<\/code> keyword and Type 7 cipher in favor of modern Type 8 (SHA-256) or Type 9 (scrypt) hashing. <\/p>\n<p>While local accounts remain essential as reliable, out-of-band fallbacks during network outages or password recovery procedures, production environments should ultimately delegate routine access to centralized AAA protocols like TACACS+. This layered approach ensures that local credentials serve their true purpose: a secure, hardened safety net for disaster recovery.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-password-on-cisco-router-username_24485.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+Password+on+Cisco+Router+Username+https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\",\"How to Change Password on Cisco Router Username\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Maintaining administrative control over network infrastructure begins with disciplined credential management. Whether performing routine security rotations, adjusting access privileges for network engineers, or replacing stale passwords on legacy equipment, updating local credentials in Cisco IOS and IOS-XE is a foundational operational task. While changing a local user&#8217;s password on a Cisco router requires only a&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change Password on Cisco Router Username - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change Password on Cisco Router Username - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Maintaining administrative control over network infrastructure begins with disciplined credential management. Whether performing routine security rotations, adjusting access privileges for network engineers, or replacing stale passwords on legacy equipment, updating local credentials in Cisco IOS and IOS-XE is a foundational operational task. While changing a local user&#8217;s password on a Cisco router requires only a... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:49:30+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\",\"name\":\"How to Change Password on Cisco Router Username - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:49:30+00:00\",\"dateModified\":\"2026-11-16T02:49:30+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change Password on Cisco Router Username\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change Password on Cisco Router Username\",\"datePublished\":\"2026-11-16T02:49:30+00:00\",\"dateModified\":\"2026-11-16T02:49:30+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#webpage\"},\"wordCount\":1687,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change Password on Cisco Router Username - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html","og_locale":"en_US","og_type":"article","og_title":"How to Change Password on Cisco Router Username - SPOTO Official Blog","og_description":"Maintaining administrative control over network infrastructure begins with disciplined credential management. Whether performing routine security rotations, adjusting access privileges for network engineers, or replacing stale passwords on legacy equipment, updating local credentials in Cisco IOS and IOS-XE is a foundational operational task. While changing a local user&#8217;s password on a Cisco router requires only a... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:49:30+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html","name":"How to Change Password on Cisco Router Username - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:49:30+00:00","dateModified":"2026-11-16T02:49:30+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change Password on Cisco Router Username"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change Password on Cisco Router Username","datePublished":"2026-11-16T02:49:30+00:00","dateModified":"2026-11-16T02:49:30+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#webpage"},"wordCount":1687,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-password-on-cisco-router-username_24485.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24485"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24485"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24485\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24485"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24485"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24485"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}