{"id":24481,"date":"2026-11-16T10:41:41","date_gmt":"2026-11-16T02:41:41","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html"},"modified":"2026-11-16T10:41:41","modified_gmt":"2026-11-16T02:41:41","slug":"how-to-change-ip-address-on-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html","title":{"rendered":"How to Change IP Address on Cisco Switch"},"content":{"rendered":"<p>Managing network infrastructure often requires re-addressing devices during subnet migrations, security segmentation projects, or initial deployments. On Cisco Catalyst switches, management access is handled through a Switch Virtual Interface (SVI)\u2014a logical Layer 3 interface tied to a specific VLAN. Changing this IP address requires precision: an incorrect subnet mask, a forgotten default gateway, or an uncommitted change can immediately sever management access and isolate the switch from the network.<\/p>\n<p>This comprehensive guide covers everything required to reconfigure a Cisco switch IP address via the Cisco IOS command-line interface (CLI). You will learn the underlying architecture, how to safely inspect the current configuration, execute the change, update routing parameters, execute remote changes without lockout, and troubleshoot reachability issues.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Cisco_Catalyst_Management_IP_Architecture_and_Specifications\" title=\"Cisco Catalyst Management IP Architecture and Specifications\">Cisco Catalyst Management IP Architecture and Specifications<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Switch_Virtual_Interface_SVI_Definition\" title=\"Switch Virtual Interface (SVI) Definition\">Switch Virtual Interface (SVI) Definition<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#SVI_Operational_State_Requirements_Autostate\" title=\"SVI Operational State Requirements (Autostate)\">SVI Operational State Requirements (Autostate)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#How_to_Find_the_Current_IP_Address_Using_the_Cisco_IOS_CLI\" title=\"How to Find the Current IP Address Using the Cisco IOS CLI\">How to Find the Current IP Address Using the Cisco IOS CLI<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_1_Access_Privileged_EXEC_Mode\" title=\"Step 1: Access Privileged EXEC Mode\">Step 1: Access Privileged EXEC Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_2_Identify_Active_Interfaces_and_Assigned_IPs\" title=\"Step 2: Identify Active Interfaces and Assigned IPs\">Step 2: Identify Active Interfaces and Assigned IPs<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_3_Retrieve_the_Subnet_Mask\" title=\"Step 3: Retrieve the Subnet Mask\">Step 3: Retrieve the Subnet Mask<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step-by-Step_Guide_Changing_the_Management_IP_Address_via_CLI\" title=\"Step-by-Step Guide: Changing the Management IP Address via CLI\">Step-by-Step Guide: Changing the Management IP Address via CLI<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_1_Enter_Global_Configuration_Mode\" title=\"Step 1: Enter Global Configuration Mode\">Step 1: Enter Global Configuration Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_2_Enter_the_Interface_Configuration_Context\" title=\"Step 2: Enter the Interface Configuration Context\">Step 2: Enter the Interface Configuration Context<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_3_Assign_the_New_IP_Address_and_Subnet_Mask\" title=\"Step 3: Assign the New IP Address and Subnet Mask\">Step 3: Assign the New IP Address and Subnet Mask<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_4_Ensure_the_Interface_Is_Active\" title=\"Step 4: Ensure the Interface Is Active\">Step 4: Ensure the Interface Is Active<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_5_Save_the_Running_Configuration\" title=\"Step 5: Save the Running Configuration\">Step 5: Save the Running Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Updating_the_Default_Gateway_and_Routing_Settings\" title=\"Updating the Default Gateway and Routing Settings\">Updating the Default Gateway and Routing Settings<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Scenario_A_Layer_2_Switches_ip_default-gateway\" title=\"Scenario A: Layer 2 Switches (ip default-gateway)\">Scenario A: Layer 2 Switches (ip default-gateway)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Scenario_B_Layer_3_Multi-Layer_Switches_ip_route\" title=\"Scenario B: Layer 3 Multi-Layer Switches (ip route)\">Scenario B: Layer 3 Multi-Layer Switches (ip route)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Safely_Changing_a_Remote_Switch_IP_Without_Dropping_SSH_Connectivity\" title=\"Safely Changing a Remote Switch IP Without Dropping SSH Connectivity\">Safely Changing a Remote Switch IP Without Dropping SSH Connectivity<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_1_Arm_the_Automated_Reload_Timer\" title=\"Step 1: Arm the Automated Reload Timer\">Step 1: Arm the Automated Reload Timer<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_2_Execute_Commands_as_a_Single_Batch\" title=\"Step 2: Execute Commands as a Single Batch\">Step 2: Execute Commands as a Single Batch<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Step_3_Establish_a_New_Connection_and_Cancel_the_Reload\" title=\"Step 3: Establish a New Connection and Cancel the Reload\">Step 3: Establish a New Connection and Cancel the Reload<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Cisco_Switch_IP_Configuration_Scripts_and_Command_Templates\" title=\"Cisco Switch IP Configuration Scripts and Command Templates\">Cisco Switch IP Configuration Scripts and Command Templates<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Layer_2_Catalyst_Switch_Template\" title=\"Layer 2 Catalyst Switch Template\">Layer 2 Catalyst Switch Template<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Layer_3_Multi-Layer_Switch_Template\" title=\"Layer 3 Multi-Layer Switch Template\">Layer 3 Multi-Layer Switch Template<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Frequently_Asked_Questions_Troubleshooting_Switch_Unreachability\" title=\"Frequently Asked Questions: Troubleshooting Switch Unreachability\">Frequently Asked Questions: Troubleshooting Switch Unreachability<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Why_can_I_ping_the_new_switch_IP_from_the_local_subnet_but_not_from_across_a_router\" title=\"Why can I ping the new switch IP from the local subnet, but not from across a router?\">Why can I ping the new switch IP from the local subnet, but not from across a router?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Why_does_show_ip_interface_brief_display_the_VLAN_interface_as_updown_or_downdown\" title=\"Why does show ip interface brief display the VLAN interface as &#8220;up\/down&#8221; or &#8220;down\/down&#8221;?\">Why does show ip interface brief display the VLAN interface as &#8220;up\/down&#8221; or &#8220;down\/down&#8221;?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-27\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Why_is_SSHTelnet_failing_even_though_the_switch_responds_to_ICMP_echo_ping\" title=\"Why is SSH\/Telnet failing even though the switch responds to ICMP echo (ping)?\">Why is SSH\/Telnet failing even though the switch responds to ICMP echo (ping)?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-28\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Does_assigning_a_new_IP_address_automatically_remove_the_old_IP\" title=\"Does assigning a new IP address automatically remove the old IP?\">Does assigning a new IP address automatically remove the old IP?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-29\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Catalyst_Management_IP_Architecture_and_Specifications\"><\/span>Cisco Catalyst Management IP Architecture and Specifications<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>In Cisco IOS and IOS XE architectures, management communication to a Layer 2 or Layer 3 Catalyst switch occurs through an in-band Switch Virtual Interface (SVI) or a dedicated out-of-band (OOB) Ethernet management port (such as <code>FastEthernet0<\/code> or <code>GigabitEthernet0\/0<\/code> on supported chassis).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Switch_Virtual_Interface_SVI_Definition\"><\/span>Switch Virtual Interface (SVI) Definition<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>An SVI is a routed interface representing a VLAN terminating on the switch. It provides Layer 3 processing for packets directed to or originating from the switch CPU (such as SSH, SNMP, Syslog, NTP, and RADIUS\/TACACS+ traffic).<\/p>\n<ul>\n<li><strong>Default Configuration:<\/strong> Out of the box, Cisco switches default management capabilities to <code>interface Vlan1<\/code>.<\/li>\n<li><strong>Security Recommendation:<\/strong> Production deployments routinely deactivate <code>Vlan1<\/code> for management and provision an isolated management VLAN (e.g., VLAN 10 or VLAN 99) across 802.1Q trunk links.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"SVI_Operational_State_Requirements_Autostate\"><\/span>SVI Operational State Requirements (Autostate)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For a management SVI to transition into an <code>up\/up<\/code> state and process packets, Cisco IOS enforces the Autostate algorithm. The SVI will remain <code>down\/down<\/code> or <code>up\/down<\/code> unless the following conditions are met:<br \/>\n1. The corresponding VLAN exists in the switch&#8217;s local VLAN database (<code>vlan.dat<\/code>).<br \/>\n2. The VLAN is active and not administratively shut down.<br \/>\n3. At least one Layer 2 physical switchport or port-channel assigned to that VLAN is in the operational <code>up\/up<\/code> spanning-tree forwarding state, or an active 802.1Q trunk port is up and has the VLAN unpruned in its allowed VLAN list.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Find_the_Current_IP_Address_Using_the_Cisco_IOS_CLI\"><\/span>How to Find the Current IP Address Using the Cisco IOS CLI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Before modifying any network settings, determine the current management interface, its IP address, subnet mask, and operational status.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Access_Privileged_EXEC_Mode\"><\/span>Step 1: Access Privileged EXEC Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Connect to the switch via console or SSH and enter Privileged EXEC mode using the <code>enable<\/code> command:<\/p>\n<pre><code class=\"language-text\">Switch&gt; enable\nSwitch#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Identify_Active_Interfaces_and_Assigned_IPs\"><\/span>Step 2: Identify Active Interfaces and Assigned IPs<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Execute <code>show ip interface brief<\/code> to display a summary table of all physical interfaces and virtual interfaces:<\/p>\n<pre><code class=\"language-text\">Switch# show ip interface brief\nInterface              IP-Address      OK? Method Status                Protocol\nVlan1                  192.168.1.2     YES manual up                    up      \nGigabitEthernet0\/1     unassigned      YES unset  up                    up      \nGigabitEthernet0\/2     unassigned      YES unset  down                  down    \n<\/code><\/pre>\n<p>Identify the SVI configured with an IP address (commonly <code>Vlan1<\/code> or a dedicated management VLAN).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Retrieve_the_Subnet_Mask\"><\/span>Step 3: Retrieve the Subnet Mask<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The <code>show ip interface brief<\/code> output does not display subnet masks. To obtain the exact subnet mask and routing settings, query the specific VLAN interface:<\/p>\n<pre><code class=\"language-text\">Switch# show ip interface vlan 1\nVlan1 is up, line protocol is up\n  Internet address is 192.168.1.2\/24\n  Broadcast address is 255.255.255.255\n  Address determined by non-volatile memory\n  MTU is 1500 bytes\n<\/code><\/pre>\n<p>Alternatively, view the active running configuration for that interface:<\/p>\n<pre><code class=\"language-text\">Switch# show running-config interface vlan 1\ninterface Vlan1\n ip address 192.168.1.2 255.255.255.0\n no shutdown\nend\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_Changing_the_Management_IP_Address_via_CLI\"><\/span>Step-by-Step Guide: Changing the Management IP Address via CLI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once you have verified the active SVI, you can reconfigure the IP address. Cisco IOS allows you to overwrite the primary IP address directly on the interface.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Enter_Global_Configuration_Mode\"><\/span>Step 1: Enter Global Configuration Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>From Privileged EXEC mode, enter global configuration mode:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nEnter configuration commands, one per line. End with CNTL\/Z.\nSwitch(config)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Enter_the_Interface_Configuration_Context\"><\/span>Step 2: Enter the Interface Configuration Context<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Navigate to the SVI that holds the management IP address:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface vlan 1\nSwitch(config-if)#\n<\/code><\/pre>\n<p><em>(Replace <code>1<\/code> with your dedicated management VLAN ID if applicable).<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Assign_the_New_IP_Address_and_Subnet_Mask\"><\/span>Step 3: Assign the New IP Address and Subnet Mask<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Issue the <code>ip address<\/code> command with your new network parameters. In Cisco IOS, applying this command automatically replaces the existing primary IP address:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# ip address 10.10.20.15 255.255.255.0\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Ensure_the_Interface_Is_Active\"><\/span>Step 4: Ensure the Interface Is Active<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Ensure that the interface is not administratively disabled:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# no shutdown\nSwitch(config-if)# exit\nSwitch(config)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Save_the_Running_Configuration\"><\/span>Step 5: Save the Running Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Return to Privileged EXEC mode and commit the changes from RAM (<code>running-config<\/code>) to NVRAM (<code>startup-config<\/code>) so they persist across reboots:<\/p>\n<pre><code class=\"language-text\">Switch(config)# end\nSwitch# copy running-config startup-config\nDestination filename [startup-config]? [Press Enter]\nBuilding configuration...\n[OK]\n<\/code><\/pre>\n<p><em>(Alternatively, execute the shortcut <code>write memory<\/code> or <code>wr<\/code>).<\/em><\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Updating_the_Default_Gateway_and_Routing_Settings\"><\/span>Updating the Default Gateway and Routing Settings<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Changing the IP address of a switch to a new subnet almost always requires updating its default gateway. Without an accurate gateway, the switch can communicate with devices on its local subnet but cannot return traffic to management stations residing in other subnets.<\/p>\n<p>The command required depends on whether your switch functions purely at Layer 2 or has Layer 3 IP routing enabled.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Scenario_A_Layer_2_Switches_ip_default-gateway\"><\/span>Scenario A: Layer 2 Switches (<code>ip default-gateway<\/code>)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If the switch operates as a pure Layer 2 bridge (standard for Catalyst 2960, 1000, or multi-layer switches operating with <code>no ip routing<\/code>), configure the default gateway in global configuration mode:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# ip default-gateway 10.10.20.1\nSwitch(config)# end\nSwitch# copy running-config startup-config\n<\/code><\/pre>\n<p>To verify the updated gateway:<\/p>\n<pre><code class=\"language-text\">Switch# show ip default-gateway\n10.10.20.1\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Scenario_B_Layer_3_Multi-Layer_Switches_ip_route\"><\/span>Scenario B: Layer 3 Multi-Layer Switches (<code>ip route<\/code>)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If your Catalyst switch (e.g., Catalyst 3650, 3850, 9200, 9300) operates as a Layer 3 switch with <code>ip routing<\/code> enabled, the <code>ip default-gateway<\/code> command is ignored. Instead, manage default egress traffic using a static default route (<code>0.0.0.0\/0<\/code>):<\/p>\n<ol>\n<li>Check the existing routing table:<br \/>\n   <code>text<br \/>\n   Switch# show ip route<\/code><\/li>\n<li>Remove the old static default route:<br \/>\n   <code>text<br \/>\n   Switch(config)# no ip route 0.0.0.0 0.0.0.0 192.168.1.1<\/code><\/li>\n<li>Add the new static default route pointing to your new next-hop gateway:<br \/>\n   <code>text<br \/>\n   Switch(config)# ip route 0.0.0.0 0.0.0.0 10.10.20.1<br \/>\n   Switch(config)# end<br \/>\n   Switch# copy running-config startup-config<\/code><\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Safely_Changing_a_Remote_Switch_IP_Without_Dropping_SSH_Connectivity\"><\/span>Safely Changing a Remote Switch IP Without Dropping SSH Connectivity<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Re-addressing a switch over an active SSH or Telnet session carries significant risk. Modifying the IP address or default gateway terminates the active TCP session instantly. If a syntax error occurs, or the new subnet\/gateway is unreachable, you face a permanent lockout that requires an on-site console cable intervention.<\/p>\n<p>Use this failsafe procedure to protect against remote lockouts.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Arm_the_Automated_Reload_Timer\"><\/span>Step 1: Arm the Automated Reload Timer<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Before executing configuration changes, schedule a safety reload:<\/p>\n<pre><code class=\"language-text\">Switch# reload in 10\nSystem configuration has been modified. Save? [yes\/no]: no\nProceed with reload? [confirm] [Press Enter]\n<\/code><\/pre>\n<ul>\n<li><strong>How this protects you:<\/strong> The switch will reboot back into its current <code>startup-config<\/code> in 10 minutes. If you lose access, do nothing; the switch will automatically reload the previous working configuration.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Execute_Commands_as_a_Single_Batch\"><\/span>Step 2: Execute Commands as a Single Batch<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To prevent mid-session disconnects caused by an IP change without an updated gateway, combine your interface IP change, gateway update, and interface state into a single batch entry:<\/p>\n<pre><code class=\"language-text\">configure terminal\ninterface vlan 1\n ip address 10.10.20.15 255.255.255.0\n no shutdown\n exit\nip default-gateway 10.10.20.1\nend\n<\/code><\/pre>\n<p>Paste these lines all at once into the terminal window. Your current SSH session will terminate as the old IP stops responding.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Establish_a_New_Connection_and_Cancel_the_Reload\"><\/span>Step 3: Establish a New Connection and Cancel the Reload<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ol>\n<li>Open a new terminal session from your management station and connect to the new IP:<br \/>\n   <code>bash<br \/>\n   ssh admin@10.10.20.15<\/code><\/li>\n<li>Upon successful authentication, <strong>immediately cancel the reload timer<\/strong>:<br \/>\n   <code>text<br \/>\n   Switch# reload cancel<\/code><\/li>\n<li>Save your running configuration to NVRAM:<br \/>\n   <code>text<br \/>\n   Switch# copy running-config startup-config<\/code><\/li>\n<\/ol>\n<p>If the new connection fails within 10 minutes, the reload timer expires, rebooting the switch to its prior IP and restoring access.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Switch_IP_Configuration_Scripts_and_Command_Templates\"><\/span>Cisco Switch IP Configuration Scripts and Command Templates<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use these pre-formatted scripts to streamline configuration. Replace all bracketed values (<code>&lt; ... &gt;<\/code>) with your site-specific parameters before pasting into the CLI.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Layer_2_Catalyst_Switch_Template\"><\/span>Layer 2 Catalyst Switch Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">enable\nconfigure terminal\n!\ninterface vlan &lt;MANAGEMENT_VLAN_ID&gt;\n description Management_SVI\n ip address &lt;NEW_IP_ADDRESS&gt; &lt;SUBNET_MASK&gt;\n no shutdown\n exit\n!\nip default-gateway &lt;NEW_GATEWAY_IP&gt;\n!\nend\ncopy running-config startup-config\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Layer_3_Multi-Layer_Switch_Template\"><\/span>Layer 3 Multi-Layer Switch Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">enable\nconfigure terminal\n!\ninterface vlan &lt;MANAGEMENT_VLAN_ID&gt;\n description Routed_Management_SVI\n ip address &lt;NEW_IP_ADDRESS&gt; &lt;SUBNET_MASK&gt;\n no shutdown\n exit\n!\nno ip route 0.0.0.0 0.0.0.0 &lt;OLD_GATEWAY_IP&gt;\nip route 0.0.0.0 0.0.0.0 &lt;NEW_GATEWAY_IP&gt;\n!\nend\ncopy running-config startup-config\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions_Troubleshooting_Switch_Unreachability\"><\/span>Frequently Asked Questions: Troubleshooting Switch Unreachability<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"Why_can_I_ping_the_new_switch_IP_from_the_local_subnet_but_not_from_across_a_router\"><\/span>Why can I ping the new switch IP from the local subnet, but not from across a router?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This issue almost always points to a missing or incorrect default gateway.<br \/>\n* On Layer 2 switches, verify that <code>ip default-gateway<\/code> is configured and matches the IP of the local router interface on that VLAN.<br \/>\n* On Layer 3 switches with <code>ip routing<\/code> active, ensure a default static route (<code>ip route 0.0.0.0 0.0.0.0 &lt;next-hop&gt;<\/code>) exists using <code>show ip route<\/code>.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_does_show_ip_interface_brief_display_the_VLAN_interface_as_updown_or_downdown\"><\/span>Why does <code>show ip interface brief<\/code> display the VLAN interface as &#8220;up\/down&#8221; or &#8220;down\/down&#8221;?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This is driven by the Cisco Autostate mechanism covered earlier:<br \/>\n* If the line protocol is <strong>down<\/strong>, ensure the VLAN is defined in the VLAN database (<code>show vlan brief<\/code>).<br \/>\n* Check that at least one physical port belonging to this VLAN is plugged in, operational, and in the STP forwarding state (<code>show interfaces status<\/code>).<br \/>\n* If using an 802.1Q trunk, verify the VLAN is not excluded by the <code>switchport trunk allowed vlan<\/code> filter.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_is_SSHTelnet_failing_even_though_the_switch_responds_to_ICMP_echo_ping\"><\/span>Why is SSH\/Telnet failing even though the switch responds to ICMP echo (ping)?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ol>\n<li><strong>Access Control Lists (ACLs):<\/strong> Check your VTY line configurations. Run <code>show running-config | section line vty<\/code>. If an <code>access-class<\/code> is applied, make sure your new management subnet is explicitly permitted in the referenced access list.<\/li>\n<li><strong>Crypto Key Invalidation:<\/strong> If the switch hostname or IP domain name was changed alongside the IP address, RSA key pairs may need regeneration:<br \/>\n   <code>text<br \/>\n   Switch(config)# crypto key generate rsa modulus 2048<\/code><\/li>\n<\/ol>\n<h3><span class=\"ez-toc-section\" id=\"Does_assigning_a_new_IP_address_automatically_remove_the_old_IP\"><\/span>Does assigning a new IP address automatically remove the old IP?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Yes. Entering <code>ip address &lt;new-ip&gt; &lt;subnet-mask&gt;<\/code> directly replaces the primary IP address. It does not append a second IP unless you explicitly append the <code>secondary<\/code> keyword to the command. You can confirm active assignments at any time using <code>show running-config interface vlan &lt;vlan-id&gt;<\/code>.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Changing the IP address on a Cisco Catalyst switch involves modifying the management SVI, ensuring alignment with the Autostate prerequisites, and updating the corresponding Layer 2 default gateway or Layer 3 default route. For remote environments, using proactive rollback mechanisms like the <code>reload in<\/code> safety timer guards against configuration lockouts. By verifying interface states prior to execution and committing changes to NVRAM immediately after testing, network administrators can ensure seamless management transitions across enterprise environments.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-ip-address-on-cisco-switch_24481.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+IP+Address+on+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\",\"How to Change IP Address on Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Managing network infrastructure often requires re-addressing devices during subnet migrations, security segmentation projects, or initial deployments. On Cisco Catalyst switches, management access is handled through a Switch Virtual Interface (SVI)\u2014a logical Layer 3 interface tied to a specific VLAN. Changing this IP address requires precision: an incorrect subnet mask, a forgotten default gateway, or an&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change IP Address on Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change IP Address on Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Managing network infrastructure often requires re-addressing devices during subnet migrations, security segmentation projects, or initial deployments. On Cisco Catalyst switches, management access is handled through a Switch Virtual Interface (SVI)\u2014a logical Layer 3 interface tied to a specific VLAN. Changing this IP address requires precision: an incorrect subnet mask, a forgotten default gateway, or an... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:41:41+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\",\"name\":\"How to Change IP Address on Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:41:41+00:00\",\"dateModified\":\"2026-11-16T02:41:41+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change IP Address on Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change IP Address on Cisco Switch\",\"datePublished\":\"2026-11-16T02:41:41+00:00\",\"dateModified\":\"2026-11-16T02:41:41+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#webpage\"},\"wordCount\":1345,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change IP Address on Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html","og_locale":"en_US","og_type":"article","og_title":"How to Change IP Address on Cisco Switch - SPOTO Official Blog","og_description":"Managing network infrastructure often requires re-addressing devices during subnet migrations, security segmentation projects, or initial deployments. On Cisco Catalyst switches, management access is handled through a Switch Virtual Interface (SVI)\u2014a logical Layer 3 interface tied to a specific VLAN. Changing this IP address requires precision: an incorrect subnet mask, a forgotten default gateway, or an... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:41:41+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html","name":"How to Change IP Address on Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:41:41+00:00","dateModified":"2026-11-16T02:41:41+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change IP Address on Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change IP Address on Cisco Switch","datePublished":"2026-11-16T02:41:41+00:00","dateModified":"2026-11-16T02:41:41+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#webpage"},"wordCount":1345,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-ip-address-on-cisco-switch_24481.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24481"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24481"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24481\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24481"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24481"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24481"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}