{"id":24480,"date":"2026-11-16T10:39:58","date_gmt":"2026-11-16T02:39:58","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html"},"modified":"2026-11-16T10:39:58","modified_gmt":"2026-11-16T02:39:58","slug":"how-to-change-encapsulation-on-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html","title":{"rendered":"How to Change Encapsulation on Cisco Switch"},"content":{"rendered":"<p>Trunk links are essential in enterprise networking, carrying traffic for multiple Virtual Local Area Networks (VLANs) across switches, routers, and firewalls over a single physical or logical interface. To ensure that the receiving device forwards each Ethernet frame to its intended broadcast domain, the switch applies a VLAN encapsulation mechanism. <\/p>\n<p>While the networking industry has unified around the open standard IEEE 802.1Q (<code>dot1q<\/code>), network engineers frequently encounter different switch architectures across Cisco Catalyst and Nexus product lines. Depending on whether a switch platform supports legacy multi-protocol encapsulation or modern single-protocol operations, the syntax and behavior for setting encapsulation vary significantly. This guide covers how to inspect, configure, and troubleshoot VLAN trunk encapsulation across Cisco switches.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Trunk_Encapsulation_Protocols_IEEE_8021Q_vs_Cisco_ISL\" title=\"Trunk Encapsulation Protocols: IEEE 802.1Q vs. Cisco ISL\">Trunk Encapsulation Protocols: IEEE 802.1Q vs. Cisco ISL<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Command_Reference_switchport_trunk_encapsulation\" title=\"Command Reference: switchport trunk encapsulation\">Command Reference: switchport trunk encapsulation<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Syntax\" title=\"Syntax\">Syntax<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Parameters\" title=\"Parameters\">Parameters<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Default_Configuration\" title=\"Default Configuration\">Default Configuration<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Command_Modes\" title=\"Command Modes\">Command Modes<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Usage_Guidelines\" title=\"Usage Guidelines\">Usage Guidelines<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step-by-Step_Guide_Configuring_dot1q_Trunk_Encapsulation\" title=\"Step-by-Step Guide: Configuring dot1q Trunk Encapsulation\">Step-by-Step Guide: Configuring dot1q Trunk Encapsulation<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step_1_Access_Global_Configuration_Mode\" title=\"Step 1: Access Global Configuration Mode\">Step 1: Access Global Configuration Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step_2_Select_the_Interface_or_Interface_Range\" title=\"Step 2: Select the Interface or Interface Range\">Step 2: Select the Interface or Interface Range<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step_3_Set_the_Encapsulation_Type_to_dot1q\" title=\"Step 3: Set the Encapsulation Type to dot1q\">Step 3: Set the Encapsulation Type to dot1q<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step_4_Configure_the_Interface_Mode_to_Trunk\" title=\"Step 4: Configure the Interface Mode to Trunk\">Step 4: Configure the Interface Mode to Trunk<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step_5_Best_Practice_Define_the_Native_VLAN_and_Allowed_VLANs\" title=\"Step 5: (Best Practice) Define the Native VLAN and Allowed VLANs\">Step 5: (Best Practice) Define the Native VLAN and Allowed VLANs<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step_6_Verify_the_Encapsulation_Configuration\" title=\"Step 6: Verify the Encapsulation Configuration\">Step 6: Verify the Encapsulation Configuration<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Troubleshooting_Resolving_the_Trunk_Encapsulation_Is_Auto_Error\" title=\"Troubleshooting: Resolving the &#8220;Trunk Encapsulation Is Auto&#8221; Error\">Troubleshooting: Resolving the &#8220;Trunk Encapsulation Is Auto&#8221; Error<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#The_Problem\" title=\"The Problem\">The Problem<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Why_This_Happens\" title=\"Why This Happens\">Why This Happens<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#The_Solution\" title=\"The Solution\">The Solution<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Why_Is_the_switchport_trunk_encapsulation_Command_Missing_or_Invalid\" title=\"Why Is the &#8220;switchport trunk encapsulation&#8221; Command Missing or Invalid?\">Why Is the &#8220;switchport trunk encapsulation&#8221; Command Missing or Invalid?<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Root_Cause\" title=\"Root Cause\">Root Cause<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Step-by-Step_Configuration_on_8021Q-Only_Switches\" title=\"Step-by-Step Configuration on 802.1Q-Only Switches\">Step-by-Step Configuration on 802.1Q-Only Switches<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Cisco_Switchport_Trunk_Configuration_Templates_and_Cheat_Sheet\" title=\"Cisco Switchport Trunk Configuration Templates and Cheat Sheet\">Cisco Switchport Trunk Configuration Templates and Cheat Sheet<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Template_1_Dual-Encapsulation_Switches_Catalyst_3560_3750_6500\" title=\"Template 1: Dual-Encapsulation Switches (Catalyst 3560, 3750, 6500)\">Template 1: Dual-Encapsulation Switches (Catalyst 3560, 3750, 6500)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Template_2_Standard_8021Q-Only_Switches_Catalyst_2960_9200_9300_9500\" title=\"Template 2: Standard 802.1Q-Only Switches (Catalyst 2960, 9200, 9300, 9500)\">Template 2: Standard 802.1Q-Only Switches (Catalyst 2960, 9200, 9300, 9500)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Template_3_Port-Channel_EtherChannel_Trunk\" title=\"Template 3: Port-Channel (EtherChannel) Trunk\">Template 3: Port-Channel (EtherChannel) Trunk<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Verification_Cheat_Sheet\" title=\"Verification Cheat Sheet\">Verification Cheat Sheet<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-27\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Trunk_Encapsulation_Protocols_IEEE_8021Q_vs_Cisco_ISL\"><\/span>Trunk Encapsulation Protocols: IEEE 802.1Q vs. Cisco ISL<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>VLAN encapsulation defines how frames are identified as belonging to specific VLANs across an inter-switch trunk link. Cisco switches historically supported two encapsulation protocols: Cisco&#8217;s proprietary Inter-Switch Link (ISL) and the industry-standard IEEE 802.1Q.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Criterion<\/th>\n<th style=\"text-align: left;\">IEEE 802.1Q (<code>dot1q<\/code>)<\/th>\n<th style=\"text-align: left;\">Cisco ISL (Inter-Switch Link)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Standardization<\/strong><\/td>\n<td style=\"text-align: left;\">IEEE Open Standard (802.1Q)<\/td>\n<td style=\"text-align: left;\">Cisco Proprietary<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Framing Technique<\/strong><\/td>\n<td style=\"text-align: left;\">Internal tagging: Inserts a 4-byte tag into the original Ethernet frame header<\/td>\n<td style=\"text-align: left;\">External encapsulation: Encapsulates the entire Ethernet frame inside a new 26-byte header and 4-byte CRC trailer<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Frame Overhead<\/strong><\/td>\n<td style=\"text-align: left;\">4 bytes (can expand frame from 1518 to 1522 bytes)<\/td>\n<td style=\"text-align: left;\">30 bytes total (26-byte header + 4-byte trailer)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Native VLAN Support<\/strong><\/td>\n<td style=\"text-align: left;\">Yes. Traffic on the native VLAN is transmitted untagged across the trunk<\/td>\n<td style=\"text-align: left;\">No. All frames traversing an ISL trunk are encapsulated, with no concept of untagged frames<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>VLAN Range<\/strong><\/td>\n<td style=\"text-align: left;\">1 to 4094 (12-bit VLAN identifier field)<\/td>\n<td style=\"text-align: left;\">1 to 1005 (historically; later expanded to 4094 in revised ASICs)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Hardware Compatibility<\/strong><\/td>\n<td style=\"text-align: left;\">Universal across all networking vendors and modern NICs<\/td>\n<td style=\"text-align: left;\">Cisco-only; deprecated and absent on all modern switching silicon<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Current Platform Status<\/strong><\/td>\n<td style=\"text-align: left;\">Default and sole standard in Cisco IOS, IOS-XE, and NX-OS<\/td>\n<td style=\"text-align: left;\">Obsolete; removed from Catalyst 2960, 3650, 3850, and 9000 platforms<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Command_Reference_switchport_trunk_encapsulation\"><\/span>Command Reference: switchport trunk encapsulation<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The <code>switchport trunk encapsulation<\/code> interface configuration command defines the encapsulation format used when the interface is configured as a trunk port.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Syntax\"><\/span>Syntax<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">switchport trunk encapsulation {dot1q | isl | negotiate}\nno switchport trunk encapsulation\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Parameters\"><\/span>Parameters<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong><code>dot1q<\/code><\/strong>: Forces the interface to use IEEE 802.1Q tagging on trunk connections.<\/li>\n<li><strong><code>isl<\/code><\/strong>: Forces the interface to use Cisco proprietary Inter-Switch Link encapsulation.<\/li>\n<li><strong><code>negotiate<\/code><\/strong>: Uses the Dynamic Trunking Protocol (DTP) to negotiate the encapsulation format with the neighboring switch port. If both sides support both types, ISL is favored by default on legacy Catalyst devices.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Default_Configuration\"><\/span>Default Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>On dual-encapsulation Catalyst platforms (e.g., Catalyst 3550, 3560, 3750, 4500, 6500), the default encapsulation state is <code>negotiate<\/code>.<\/li>\n<li>On modern or fixed-configuration switches (e.g., Catalyst 2960, 1000, 3850, 9200, 9300), the default and only supported encapsulation is <code>dot1q<\/code>, and this command is not present in the CLI.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Command_Modes\"><\/span>Command Modes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>Interface configuration mode (<code>config-if<\/code>)<\/li>\n<li>Interface range configuration mode (<code>config-if-range<\/code>)<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Usage_Guidelines\"><\/span>Usage Guidelines<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li>The encapsulation type must be explicitly defined before an interface can be statically forced into trunk mode (<code>switchport mode trunk<\/code>) on dual-encapsulation hardware.<\/li>\n<li>Negating the command with <code>no switchport trunk encapsulation<\/code> resets the interface back to its default state (<code>negotiate<\/code>).<\/li>\n<\/ul>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_Configuring_dot1q_Trunk_Encapsulation\"><\/span>Step-by-Step Guide: Configuring dot1q Trunk Encapsulation<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Follow these steps to manually set an interface to use 802.1Q trunk encapsulation on switches that support selectable encapsulation protocols.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Access_Global_Configuration_Mode\"><\/span>Step 1: Access Global Configuration Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Log in to the switch CLI, enter privileged EXEC mode, and navigate to the global configuration prompt:<\/p>\n<pre><code class=\"language-text\">Switch&gt; enable\nSwitch# configure terminal\nSwitch(config)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Select_the_Interface_or_Interface_Range\"><\/span>Step 2: Select the Interface or Interface Range<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Specify the target port or port range that connects to the downstream switch, router, or hypervisor:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet 1\/0\/1\nSwitch(config-if)#\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Set_the_Encapsulation_Type_to_dot1q\"><\/span>Step 3: Set the Encapsulation Type to dot1q<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Explicitly assign IEEE 802.1Q encapsulation to the interface:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport trunk encapsulation dot1q\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Configure_the_Interface_Mode_to_Trunk\"><\/span>Step 4: Configure the Interface Mode to Trunk<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Force the port to operate as an unconditional trunk link:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport mode trunk\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Best_Practice_Define_the_Native_VLAN_and_Allowed_VLANs\"><\/span>Step 5: (Best Practice) Define the Native VLAN and Allowed VLANs<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Restrict trunk traffic to designated VLANs and align the native VLAN with your network security policy:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport trunk native vlan 99\nSwitch(config-if)# switchport trunk allowed vlan 10,20,30,99\nSwitch(config-if)# switchport nonegotiate\nSwitch(config-if)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_6_Verify_the_Encapsulation_Configuration\"><\/span>Step 6: Verify the Encapsulation Configuration<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Run verification commands to confirm the administrative and operational encapsulation status:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces GigabitEthernet 1\/0\/1 switchport\n<\/code><\/pre>\n<p>Look for the following lines in the command output:<br \/>\n* <code>Administrative Trunking Encapsulation: dot1q<\/code><br \/>\n* <code>Operational Trunking Encapsulation: dot1q<\/code><\/p>\n<p>To confirm active trunking state across all ports:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces trunk\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Resolving_the_Trunk_Encapsulation_Is_Auto_Error\"><\/span>Troubleshooting: Resolving the &#8220;Trunk Encapsulation Is Auto&#8221; Error<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"The_Problem\"><\/span>The Problem<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When attempting to change a switch port to trunk mode on switches such as the Catalyst 3560 or 3750 series, Cisco IOS may reject the command and return an error message:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet 1\/0\/2\nSwitch(config-if)# switchport mode trunk\nCommand rejected: An interface whose trunk encapsulation is &quot;Auto&quot; cannot be configured to &quot;trunk&quot; mode.\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Why_This_Happens\"><\/span>Why This Happens<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>On multi-encapsulation switches, the factory default encapsulation setting is <code>negotiate<\/code> (which displays as <code>\"Auto\"<\/code> in error outputs). In this state, the port relies on Dynamic Trunking Protocol (DTP) to determine whether to run ISL or 802.1Q. <\/p>\n<p>Because <code>switchport mode trunk<\/code> forces the interface to unconditionally become a trunk without negotiating, Cisco IOS requires the administrator to first declare <em>which<\/em> encapsulation protocol to use. The operating system refuses to force an interface into trunk mode while its encapsulation remains unassigned or dynamic.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"The_Solution\"><\/span>The Solution<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Resolve this error by setting the encapsulation type before issuing the <code>switchport mode trunk<\/code> command:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet 1\/0\/2\nSwitch(config-if)# switchport trunk encapsulation dot1q\nSwitch(config-if)# switchport mode trunk\n<\/code><\/pre>\n<p>Once <code>dot1q<\/code> is explicitly defined, the <code>switchport mode trunk<\/code> command applies without error.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Why_Is_the_switchport_trunk_encapsulation_Command_Missing_or_Invalid\"><\/span>Why Is the &#8220;switchport trunk encapsulation&#8221; Command Missing or Invalid?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When working on newer Catalyst platforms or layer-2-only switches, entering <code>switchport trunk encapsulation dot1q<\/code> often generates an error:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport trunk encapsulation dot1q\n                                     ^\n% Invalid input detected at '^' marker.\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Root_Cause\"><\/span>Root Cause<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This error occurs because the switch hardware <strong>only supports IEEE 802.1Q<\/strong>. <\/p>\n<p>Cisco deprecated the proprietary ISL standard in the mid-2000s. Consequently, switches designed exclusively for 802.1Q\u2014including the Catalyst 2950, 2960, 2960-X, 1000 series, and modern enterprise platforms like the Catalyst 3650, 3850, 9200, 9300, 9400, 9500, and 9600 series\u2014do not include ISL hardware framing circuits. <\/p>\n<p>Because there is no alternative encapsulation protocol to select, the entire <code>switchport trunk encapsulation<\/code> command branch is omitted from Cisco IOS and Cisco IOS-XE on these platforms.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step-by-Step_Configuration_on_8021Q-Only_Switches\"><\/span>Step-by-Step Configuration on 802.1Q-Only Switches<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>On platforms where the command is rejected, configure the trunk directly:<\/p>\n<ol>\n<li><strong>Verify interface switchport support<\/strong>: Ensure the interface is configured as a Layer 2 switchport if working on a multilayer switch:<br \/>\n   <code>text<br \/>\n   Switch(config-if)# switchport<\/code><\/li>\n<li><strong>Set the trunk mode directly<\/strong>: Omit the encapsulation command entirely and apply trunk mode:<br \/>\n   <code>text<br \/>\n   Switch(config-if)# switchport mode trunk<\/code><\/li>\n<li><strong>Verify the administrative encapsulation<\/strong>:<br \/>\n   <code>text<br \/>\n   Switch# show interfaces GigabitEthernet 1\/0\/1 switchport<\/code><br \/>\n   The output will show <code>Administrative Trunking Encapsulation: dot1q<\/code> hardcoded by the system.<\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Switchport_Trunk_Configuration_Templates_and_Cheat_Sheet\"><\/span>Cisco Switchport Trunk Configuration Templates and Cheat Sheet<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use these copy-and-paste templates directly in the Cisco CLI, modifying VLAN IDs and interface names to match your network design.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Template_1_Dual-Encapsulation_Switches_Catalyst_3560_3750_6500\"><\/span>Template 1: Dual-Encapsulation Switches (Catalyst 3560, 3750, 6500)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">interface &lt;INTERFACE_ID&gt;\n description UPLINK_TO_SWITCH_LEGACY\n switchport trunk encapsulation dot1q\n switchport mode trunk\n switchport trunk native vlan &lt;NATIVE_VLAN_ID&gt;\n switchport trunk allowed vlan &lt;VLAN_LIST&gt;\n switchport nonegotiate\n no shutdown\n exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Template_2_Standard_8021Q-Only_Switches_Catalyst_2960_9200_9300_9500\"><\/span>Template 2: Standard 802.1Q-Only Switches (Catalyst 2960, 9200, 9300, 9500)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">interface &lt;INTERFACE_ID&gt;\n description UPLINK_TO_SWITCH_MODERN\n switchport\n switchport mode trunk\n switchport trunk native vlan &lt;NATIVE_VLAN_ID&gt;\n switchport trunk allowed vlan &lt;VLAN_LIST&gt;\n switchport nonegotiate\n no shutdown\n exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Template_3_Port-Channel_EtherChannel_Trunk\"><\/span>Template 3: Port-Channel (EtherChannel) Trunk<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">interface Port-channel 1\n description TRUNK_ETHERCHANNEL\n ! Include encapsulation command only if on a dual-encapsulation platform:\n switchport trunk encapsulation dot1q\n switchport mode trunk\n switchport trunk native vlan &lt;NATIVE_VLAN_ID&gt;\n switchport trunk allowed vlan &lt;VLAN_LIST&gt;\n switchport nonegotiate\n no shutdown\n exit\n\ninterface range &lt;MEMBER_INTERFACE_RANGE&gt;\n channel-group 1 mode active\n no shutdown\n exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Verification_Cheat_Sheet\"><\/span>Verification Cheat Sheet<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code class=\"language-text\">! View active trunks, native VLANs, and status:\nshow interfaces trunk\n\n! View Layer 2 switchport properties and operational encapsulation:\nshow interfaces &lt;INTERFACE_ID&gt; switchport\n\n! Check global DTP and trunk status across all ports:\nshow dtp\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Changing encapsulation on a Cisco switch comes down to identifying the underlying hardware platform. On legacy Catalyst switches supporting both ISL and 802.1Q, administrators must explicitly define <code>switchport trunk encapsulation dot1q<\/code> before switching the port mode to trunk, preventing DTP negotiation conflicts and CLI rejection errors. On modern Cisco IOS and IOS-XE platforms, 802.1Q is the universal standard\u2014hardware-level deprecation of ISL renders manual encapsulation configuration obsolete, allowing engineers to establish secure, high-throughput trunks with a direct <code>switchport mode trunk<\/code> command.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-encapsulation-on-cisco-switch_24480.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+Encapsulation+on+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\",\"How to Change Encapsulation on Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Trunk links are essential in enterprise networking, carrying traffic for multiple Virtual Local Area Networks (VLANs) across switches, routers, and firewalls over a single physical or logical interface. To ensure that the receiving device forwards each Ethernet frame to its intended broadcast domain, the switch applies a VLAN encapsulation mechanism. While the networking industry has&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change Encapsulation on Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change Encapsulation on Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Trunk links are essential in enterprise networking, carrying traffic for multiple Virtual Local Area Networks (VLANs) across switches, routers, and firewalls over a single physical or logical interface. To ensure that the receiving device forwards each Ethernet frame to its intended broadcast domain, the switch applies a VLAN encapsulation mechanism. While the networking industry has... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:39:58+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\",\"name\":\"How to Change Encapsulation on Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:39:58+00:00\",\"dateModified\":\"2026-11-16T02:39:58+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change Encapsulation on Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change Encapsulation on Cisco Switch\",\"datePublished\":\"2026-11-16T02:39:58+00:00\",\"dateModified\":\"2026-11-16T02:39:58+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#webpage\"},\"wordCount\":1047,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change Encapsulation on Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html","og_locale":"en_US","og_type":"article","og_title":"How to Change Encapsulation on Cisco Switch - SPOTO Official Blog","og_description":"Trunk links are essential in enterprise networking, carrying traffic for multiple Virtual Local Area Networks (VLANs) across switches, routers, and firewalls over a single physical or logical interface. To ensure that the receiving device forwards each Ethernet frame to its intended broadcast domain, the switch applies a VLAN encapsulation mechanism. While the networking industry has... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:39:58+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html","name":"How to Change Encapsulation on Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:39:58+00:00","dateModified":"2026-11-16T02:39:58+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change Encapsulation on Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change Encapsulation on Cisco Switch","datePublished":"2026-11-16T02:39:58+00:00","dateModified":"2026-11-16T02:39:58+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#webpage"},"wordCount":1047,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-encapsulation-on-cisco-switch_24480.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24480"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24480"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24480\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24480"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24480"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24480"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}