{"id":24479,"date":"2026-11-16T10:38:22","date_gmt":"2026-11-16T02:38:22","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html"},"modified":"2026-11-16T10:38:22","modified_gmt":"2026-11-16T02:38:22","slug":"how-to-change-default-vlan-on-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html","title":{"rendered":"How to Change Default VLAN on Cisco Switch"},"content":{"rendered":"<p>When network administrators discuss changing the &#8220;default VLAN&#8221; on a Cisco switch, they are usually referring to one of three distinct concepts: changing the untagged 802.1Q native VLAN on trunk links, migrating the switch management virtual interface (SVI) away from VLAN 1, or reassigning default access ports. In factory-default Cisco configurations, VLAN 1 simultaneously serves as the access VLAN for all physical switchports, the default native VLAN on 802.1Q trunks, and the default management interface. <\/p>\n<p>Leaving all switch traffic and administrative access inside default VLAN 1 presents significant security liabilities, including susceptibility to VLAN hopping, unauthorized administrative access, and spanning tree disruption. Restructuring these roles requires understanding how Cisco IOS handles VLAN 1, isolating untagged trunk traffic, establishing a dedicated management VLAN, and troubleshooting common link negotiation issues.<\/p>\n<hr \/>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Default_VLAN_vs_Native_VLAN_vs_Management_VLAN_Key_Differences\" title=\"Default VLAN vs. Native VLAN vs. Management VLAN: Key Differences\">Default VLAN vs. Native VLAN vs. Management VLAN: Key Differences<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Can_You_Delete_or_Rename_Default_VLAN_1_on_a_Cisco_Switch\" title=\"Can You Delete or Rename Default VLAN 1 on a Cisco Switch?\">Can You Delete or Rename Default VLAN 1 on a Cisco Switch?<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#FAQ_Technical_Constraints_and_Control_Plane_Dependencies\" title=\"FAQ: Technical Constraints and Control Plane Dependencies\">FAQ: Technical Constraints and Control Plane Dependencies<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#How_to_Change_the_Native_VLAN_on_Cisco_Trunk_Ports_Step-by-Step_Guide\" title=\"How to Change the Native VLAN on Cisco Trunk Ports: Step-by-Step Guide\">How to Change the Native VLAN on Cisco Trunk Ports: Step-by-Step Guide<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_1_Create_the_New_Native_VLAN_in_the_Local_Database\" title=\"Step 1: Create the New Native VLAN in the Local Database\">Step 1: Create the New Native VLAN in the Local Database<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_2_Navigate_to_the_Target_Trunk_Interface\" title=\"Step 2: Navigate to the Target Trunk Interface\">Step 2: Navigate to the Target Trunk Interface<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_3_Verify_Trunk_Encapsulation_and_Operational_Mode\" title=\"Step 3: Verify Trunk Encapsulation and Operational Mode\">Step 3: Verify Trunk Encapsulation and Operational Mode<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_4_Reassign_the_Native_VLAN\" title=\"Step 4: Reassign the Native VLAN\">Step 4: Reassign the Native VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_5_Configure_the_Matching_Downstream_Switch_Port\" title=\"Step 5: Configure the Matching Downstream Switch Port\">Step 5: Configure the Matching Downstream Switch Port<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_6_Verify_the_Trunk_Interface_Settings\" title=\"Step 6: Verify the Trunk Interface Settings\">Step 6: Verify the Trunk Interface Settings<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Migrating_the_Switch_Management_SVI_Away_from_Default_VLAN_1\" title=\"Migrating the Switch Management SVI Away from Default VLAN 1\">Migrating the Switch Management SVI Away from Default VLAN 1<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_1_Create_the_Management_VLAN\" title=\"Step 1: Create the Management VLAN\">Step 1: Create the Management VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_2_Ensure_the_Management_VLAN_is_Allowed_on_Trunk_Uplinks\" title=\"Step 2: Ensure the Management VLAN is Allowed on Trunk Uplinks\">Step 2: Ensure the Management VLAN is Allowed on Trunk Uplinks<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_3_Instantiate_and_Address_the_New_Management_SVI\" title=\"Step 3: Instantiate and Address the New Management SVI\">Step 3: Instantiate and Address the New Management SVI<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_4_Update_the_Default_Gateway_or_Static_Default_Route\" title=\"Step 4: Update the Default Gateway or Static Default Route\">Step 4: Update the Default Gateway or Static Default Route<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_5_Decommission_and_Shut_Down_SVI_1\" title=\"Step 5: Decommission and Shut Down SVI 1\">Step 5: Decommission and Shut Down SVI 1<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Step_6_Verify_Network_Reachability\" title=\"Step 6: Verify Network Reachability\">Step 6: Verify Network Reachability<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#CLI_Configuration_Templates_for_Native_VLAN_and_Access_Port_Hardening\" title=\"CLI Configuration Templates for Native VLAN and Access Port Hardening\">CLI Configuration Templates for Native VLAN and Access Port Hardening<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Template_1_8021Q_Trunk_Hardening_Dedicated_Dummy_Native_VLAN\" title=\"Template 1: 802.1Q Trunk Hardening (Dedicated Dummy Native VLAN)\">Template 1: 802.1Q Trunk Hardening (Dedicated Dummy Native VLAN)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Template_2_Bulk_Port_Hardening_Quarantine_Unused_Switchports\" title=\"Template 2: Bulk Port Hardening (Quarantine Unused Switchports)\">Template 2: Bulk Port Hardening (Quarantine Unused Switchports)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Troubleshooting_CDP-4-NATIVE_VLAN_MISMATCH_Errors\" title=\"Troubleshooting %CDP-4-NATIVE_VLAN_MISMATCH Errors\">Troubleshooting %CDP-4-NATIVE_VLAN_MISMATCH Errors<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-22\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Troubleshooting_Procedure\" title=\"Troubleshooting Procedure\">Troubleshooting Procedure<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-23\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Cisco_IOSIOS-XE_Command_Reference_and_Implementation_Standards\" title=\"Cisco IOS\/IOS-XE Command Reference and Implementation Standards\">Cisco IOS\/IOS-XE Command Reference and Implementation Standards<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-24\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Command_Syntax_Reference\" title=\"Command Syntax Reference\">Command Syntax Reference<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-25\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#IEEE_8021Q_Standards_Alignment\" title=\"IEEE 802.1Q Standards Alignment\">IEEE 802.1Q Standards Alignment<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-26\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Default_VLAN_vs_Native_VLAN_vs_Management_VLAN_Key_Differences\"><\/span>Default VLAN vs. Native VLAN vs. Management VLAN: Key Differences<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>To configure or secure a Cisco switch effectively, you must distinguish between the functional roles that VLAN 1 occupies by default. While commonly conflated under the label &#8220;default VLAN,&#8221; each serves an independent purpose within Layer 2 network architecture.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Feature \/ Criteria<\/th>\n<th style=\"text-align: left;\">Default VLAN<\/th>\n<th style=\"text-align: left;\">Native VLAN<\/th>\n<th style=\"text-align: left;\">Management VLAN<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Primary Definition<\/strong><\/td>\n<td style=\"text-align: left;\">The factory-assigned access VLAN to which all ports belong upon initial boot.<\/td>\n<td style=\"text-align: left;\">The single VLAN on an 802.1Q trunk link whose frames are transmitted untagged.<\/td>\n<td style=\"text-align: left;\">The Layer 3 Switch Virtual Interface (SVI) used for in-band administrative access.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Factory Default ID<\/strong><\/td>\n<td style=\"text-align: left;\">VLAN 1<\/td>\n<td style=\"text-align: left;\">VLAN 1<\/td>\n<td style=\"text-align: left;\">VLAN 1 (as <code>interface Vlan1<\/code>)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Protocol Encapsulation<\/strong><\/td>\n<td style=\"text-align: left;\">Untagged access frames carrying access traffic.<\/td>\n<td style=\"text-align: left;\">IEEE 802.1Q (untagged payload across trunk links unless native tagging is enforced).<\/td>\n<td style=\"text-align: left;\">Tagged or untagged depending on whether traffic arrives via access or trunk ports.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Modifiability<\/strong><\/td>\n<td style=\"text-align: left;\">Cannot be deleted, disabled, or renamed in Cisco IOS\/IOS-XE.<\/td>\n<td style=\"text-align: left;\">Fully configurable per trunk port via the CLI.<\/td>\n<td style=\"text-align: left;\">Fully configurable; can be instantiated on any valid active VLAN ID.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Primary Function<\/strong><\/td>\n<td style=\"text-align: left;\">Default data plane for unconfigured switchports and internal control protocols.<\/td>\n<td style=\"text-align: left;\">Backward compatibility with legacy non-trunking devices; transit for specific control traffic.<\/td>\n<td style=\"text-align: left;\">Administrative plane isolation (SSH, HTTPS, SNMP, Syslog, TACACS+\/RADIUS).<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Security Recommendation<\/strong><\/td>\n<td style=\"text-align: left;\">Move all active access ports to functional data VLANs; leave no user ports in VLAN 1.<\/td>\n<td style=\"text-align: left;\">Reassign to an unused, non-routable dummy VLAN ID (e.g., VLAN 999) across all trunks.<\/td>\n<td style=\"text-align: left;\">Dedicate an isolated, routed subnet strictly restricted by ACLs and firewall policies.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Clarifying these operational planes reveals why you cannot execute a single command to &#8220;change the default VLAN.&#8221; Instead, you must individually reconfigure the native trunk encapsulation, the management interface, and the access port assignments.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Can_You_Delete_or_Rename_Default_VLAN_1_on_a_Cisco_Switch\"><\/span>Can You Delete or Rename Default VLAN 1 on a Cisco Switch?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3><span class=\"ez-toc-section\" id=\"FAQ_Technical_Constraints_and_Control_Plane_Dependencies\"><\/span>FAQ: Technical Constraints and Control Plane Dependencies<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<h4>Can VLAN 1 be deleted, disabled, or renamed on Cisco switches?<\/h4>\n<p>No. In Cisco IOS and IOS-XE, VLAN 1 is a factory-hardcoded construct. It cannot be deleted using <code>no vlan 1<\/code>, disabled via <code>shutdown<\/code>, or renamed with the <code>name<\/code> command. If you attempt to delete VLAN 1 in configuration mode, the switch CLI rejects the operation:<\/p>\n<pre><code class=\"language-text\">Switch(config)# no vlan 1\nDefault VLAN 1 cannot be deleted.\n<\/code><\/pre>\n<h4>Why does Cisco IOS enforce this restriction on VLAN 1?<\/h4>\n<p>Cisco Layer 2 control plane protocols depend directly on VLAN 1 for core discovery and negotiation frames. Protocols such as Cisco Discovery Protocol (CDP), VLAN Trunking Protocol (VTP), Port Aggregation Protocol (PAgP), and Dynamic Trunking Protocol (DTP) are transmitted natively inside VLAN 1 payload structures. Even when the 802.1Q native VLAN is changed on a trunk link, certain control protocols\u2014such as CDP and VTP\u2014continue to send control packets with a VLAN 1 tag or untagged inside VLAN 1 to maintain backward compatibility across multi-vendor and legacy topologies.<\/p>\n<h4>Does changing the native VLAN break these control plane protocols?<\/h4>\n<p>No. Cisco switches encapsulate control protocols intelligently. When you change the native VLAN from VLAN 1 to another VLAN (such as VLAN 999), user-generated untagged traffic is directed to VLAN 999. Control frames like CDP and VTP continue to be processed and forwarded correctly over the link. Cisco Per-VLAN Spanning Tree Plus (PVST+) generates untagged BPDUs on the newly assigned native VLAN while sending tagged PVST+ BPDUs on all other VLANs (including VLAN 1).<\/p>\n<h4>What is the recommended practice if VLAN 1 cannot be removed?<\/h4>\n<p>Instead of attempting to delete VLAN 1, apply the principle of complete minimization:<br \/>\n1. Reassign all active access switchports to custom user, voice, or server VLANs.<br \/>\n2. Reassign the native VLAN on all 802.1Q trunks to a dedicated, unrouted dummy VLAN ID.<br \/>\n3. Prune VLAN 1 from all trunk links so that data frames assigned to VLAN 1 cannot traverse the network core.<br \/>\n4. Shut down <code>interface Vlan1<\/code> to prevent administrative traffic from listening on the default broadcast domain.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Change_the_Native_VLAN_on_Cisco_Trunk_Ports_Step-by-Step_Guide\"><\/span>How to Change the Native VLAN on Cisco Trunk Ports: Step-by-Step Guide<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Changing the 802.1Q native VLAN away from VLAN 1 prevents VLAN hopping attacks (such as double-tagging) and isolates untagged data frames. The following sequential workflow guides you through reassigning the native VLAN on an active or newly established trunk port.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Create_the_New_Native_VLAN_in_the_Local_Database\"><\/span>Step 1: Create the New Native VLAN in the Local Database<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Before assigning a VLAN as native on an interface, declare the VLAN globally. Industry best practices recommend using a dedicated, non-routable dummy VLAN ID (for example, VLAN 999) that carries no user or management traffic.<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# vlan 999\nSwitch(config-vlan)# name DUMMY_NATIVE_VLAN\nSwitch(config-vlan)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Navigate_to_the_Target_Trunk_Interface\"><\/span>Step 2: Navigate to the Target Trunk Interface<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enter interface configuration mode for the physical port or EtherChannel Port-Channel interface operating as the trunk link.<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet0\/1\n<\/code><\/pre>\n<p><em>(If configuring an aggregated uplink, select the Port-Channel interface directly, e.g., <code>interface Port-channel 1<\/code>.)<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Verify_Trunk_Encapsulation_and_Operational_Mode\"><\/span>Step 3: Verify Trunk Encapsulation and Operational Mode<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If using a switch model that supports both ISL and 802.1Q (such as older Catalyst platforms), specify the encapsulation type before setting the trunk mode. On modern Catalyst switches (e.g., Catalyst 9000 series), 802.1Q is the only supported encapsulation and this command is omitted automatically.<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport trunk encapsulation dot1q\nSwitch(config-if)# switchport mode trunk\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Reassign_the_Native_VLAN\"><\/span>Step 4: Reassign the Native VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Apply the <code>switchport trunk native vlan<\/code> command followed by your desired VLAN ID:<\/p>\n<pre><code class=\"language-text\">Switch(config-if)# switchport trunk native vlan 999\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Configure_the_Matching_Downstream_Switch_Port\"><\/span>Step 5: Configure the Matching Downstream Switch Port<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>802.1Q native VLAN configurations must match on both ends of a trunk link. If Switch-A has its native VLAN set to 999 while connected Switch-B remains on VLAN 1, traffic leakage and Spanning Tree Protocol (STP) inconsistencies occur. Log into the adjacent switch and repeat the configuration:<\/p>\n<pre><code class=\"language-text\">Switch-B# configure terminal\nSwitch-B(config)# vlan 999\nSwitch-B(config-vlan)# name DUMMY_NATIVE_VLAN\nSwitch-B(config-vlan)# exit\nSwitch-B(config)# interface GigabitEthernet0\/1\nSwitch-B(config-if)# switchport mode trunk\nSwitch-B(config-if)# switchport trunk native vlan 999\nSwitch-B(config-if)# end\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_6_Verify_the_Trunk_Interface_Settings\"><\/span>Step 6: Verify the Trunk Interface Settings<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Confirm that the native VLAN has successfully updated and that the trunk is actively negotiating traffic using the following verification commands:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces GigabitEthernet0\/1 trunk\n<\/code><\/pre>\n<p>Expected output confirms the assigned native VLAN:<\/p>\n<pre><code class=\"language-text\">Port        Mode             Encapsulation  Status        Native vlan\nGi0\/1       on               802.1q         trunking      999\n\nPort        Vlans allowed on trunk\nGi0\/1       1-4094\n\nPort        Vlans allowed and active in management domain\nGi0\/1       1,10,20,999\n\nPort        Vlans in spanning tree forwarding state and not pruned\nGi0\/1       1,10,20,999\n<\/code><\/pre>\n<p>To view deeper administrative attributes:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces GigabitEthernet0\/1 switchport\n<\/code><\/pre>\n<p>Look for:<br \/>\n&#8211; <code>Administrative Mode: trunk<\/code><br \/>\n&#8211; <code>Operational Mode: trunk<\/code><br \/>\n&#8211; <code>Trunking Native Mode VLAN: 999 (DUMMY_NATIVE_VLAN)<\/code><\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Migrating_the_Switch_Management_SVI_Away_from_Default_VLAN_1\"><\/span>Migrating the Switch Management SVI Away from Default VLAN 1<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>By default, Cisco Catalyst switches assign in-band management access to <code>interface Vlan1<\/code>. To protect the administrative control plane, migrate this Layer 3 Switch Virtual Interface (SVI) to an isolated management subnet (e.g., VLAN 10).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Create_the_Management_VLAN\"><\/span>Step 1: Create the Management VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Define the dedicated management VLAN in global configuration mode:<\/p>\n<pre><code class=\"language-text\">Switch(config)# vlan 10\nSwitch(config-vlan)# name MANAGEMENT_VLAN\nSwitch(config-vlan)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Ensure_the_Management_VLAN_is_Allowed_on_Trunk_Uplinks\"><\/span>Step 2: Ensure the Management VLAN is Allowed on Trunk Uplinks<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Verify that trunk links carrying traffic between the switch and your default gateway\/firewall permit VLAN 10. If an explicit allowed list is active on your trunk interfaces, append the new VLAN:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface GigabitEthernet0\/1\nSwitch(config-if)# switchport trunk allowed vlan add 10\nSwitch(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Instantiate_and_Address_the_New_Management_SVI\"><\/span>Step 3: Instantiate and Address the New Management SVI<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Create the new SVI, apply the management IP address, and administratively bring the interface up:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface Vlan 10\nSwitch(config-if)# description In-Band Switch Management\nSwitch(config-if)# ip address 10.10.10.2 255.255.255.0\nSwitch(config-if)# no shutdown\nSwitch(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Update_the_Default_Gateway_or_Static_Default_Route\"><\/span>Step 4: Update the Default Gateway or Static Default Route<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For Layer 2 switches, configure the default gateway so management packets can route beyond the local subnet. For Layer 3 switches with routing enabled (<code>ip routing<\/code>), use a static default route instead.<\/p>\n<p><strong>For Layer 2 Switches:<\/strong><\/p>\n<pre><code class=\"language-text\">Switch(config)# ip default-gateway 10.10.10.1\n<\/code><\/pre>\n<p><strong>For Layer 3 Switches:<\/strong><\/p>\n<pre><code class=\"language-text\">Switch(config)# ip route 0.0.0.0 0.0.0.0 10.10.10.1\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_5_Decommission_and_Shut_Down_SVI_1\"><\/span>Step 5: Decommission and Shut Down SVI 1<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Once connectivity across VLAN 10 is tested and confirmed, remove the IP configuration from <code>interface Vlan1<\/code> and disable the interface entirely to prevent unwanted administrative access:<\/p>\n<pre><code class=\"language-text\">Switch(config)# interface Vlan 1\nSwitch(config-if)# no ip address\nSwitch(config-if)# shutdown\nSwitch(config-if)# exit\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_6_Verify_Network_Reachability\"><\/span>Step 6: Verify Network Reachability<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Verify that the new SVI is operational and that the switch can communicate with the default gateway:<\/p>\n<pre><code class=\"language-text\">Switch# show ip interface brief | include Vlan\nVlan1                  unassigned      YES unset  administratively down down\nVlan10                 10.10.10.2      YES manual up                    up\n\nSwitch# ping 10.10.10.1\nType escape sequence to abort.\nSending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:\n!!!!!\nSuccess rate is 100 percent (5\/5), round-trip min\/avg\/max = 1\/2\/4 ms\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"CLI_Configuration_Templates_for_Native_VLAN_and_Access_Port_Hardening\"><\/span>CLI Configuration Templates for Native VLAN and Access Port Hardening<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use the production-ready CLI templates below to streamline the reassignment of native VLANs and harden unused access ports across Cisco switches.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Template_1_8021Q_Trunk_Hardening_Dedicated_Dummy_Native_VLAN\"><\/span>Template 1: 802.1Q Trunk Hardening (Dedicated Dummy Native VLAN)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This template creates an unrouted native VLAN, configures the trunk interface, sets the native VLAN, restricts allowed VLANs, and prunes VLAN 1 from user data transit.<\/p>\n<pre><code class=\"language-text\">! Step 1: Create non-routable native isolation VLAN\nvlan 999\n name DUMMY_NATIVE_VLAN\n state active\n!\n! Step 2: Configure Trunk Uplink\ninterface GigabitEthernet0\/1\n description UPLINK_TO_DISTRIBUTION\n switchport trunk encapsulation dot1q\n switchport mode trunk\n switchport trunk native vlan 999\n switchport trunk allowed vlan 10,20,30,999\n switchport nonegotiate\n no shutdown\n!\n! Step 3: Enforce Native VLAN Tagging Globally (Optional \/ Recommended)\nvlan dot1q tag native\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Template_2_Bulk_Port_Hardening_Quarantine_Unused_Switchports\"><\/span>Template 2: Bulk Port Hardening (Quarantine Unused Switchports)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>This template creates a quarantine blackhole VLAN, assigns all unused switchports to this VLAN in access mode, and administratively shuts them down.<\/p>\n<pre><code class=\"language-text\">! Step 1: Create quarantine blackhole VLAN\nvlan 666\n name QUARANTINE_UNUSED\n state active\n!\n! Step 2: Lock down range of unassigned access ports\ninterface range GigabitEthernet0\/2 - 24\n description UNUSED_PORT_LOCKDOWN\n switchport mode access\n switchport access vlan 666\n switchport nonegotiate\n no cdp enable\n shutdown\n<\/code><\/pre>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_CDP-4-NATIVE_VLAN_MISMATCH_Errors\"><\/span>Troubleshooting %CDP-4-NATIVE_VLAN_MISMATCH Errors<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When you change the native VLAN on one side of a trunk link before updating the adjacent switch, Cisco Discovery Protocol (CDP) detects the discrepancy and issues a console\/syslog warning:<\/p>\n<pre><code class=\"language-text\">%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet0\/1 (999), with Switch-B GigabitEthernet0\/1 (1).\n<\/code><\/pre>\n<p>In addition to cluttering the log, native VLAN mismatches create Layer 2 loops and route bridging domains improperly because untagged frames transmitted by one switch into VLAN 999 are received and processed by the neighboring switch as VLAN 1.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Troubleshooting_Procedure\"><\/span>Troubleshooting Procedure<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<pre><code>[Syslog Alert Generated]\n          \u2502\n          \u25bc\nStep 1: Parse Interface &amp; VLAN IDs\n          \u2502\n          \u25bc\nStep 2: Check Local Trunk Status (show interfaces trunk)\n          \u2502\n          \u25bc\nStep 3: Query Remote CDP Neighbor (show cdp neighbors detail)\n          \u2502\n          \u25bc\nStep 4: Align Native VLAN on Mismatched Endpoint\n          \u2502\n          \u25bc\nStep 5: Verify STP Consistency (show spanning-tree inconsistentports)\n<\/code><\/pre>\n<h4>Step 1: Parse the Syslog Message<\/h4>\n<p>Examine the log parameters:<br \/>\n&#8211; Local Interface: <code>GigabitEthernet0\/1<\/code><br \/>\n&#8211; Local Native VLAN: <code>999<\/code><br \/>\n&#8211; Remote Device: <code>Switch-B<\/code><br \/>\n&#8211; Remote Interface: <code>GigabitEthernet0\/1<\/code><br \/>\n&#8211; Remote Native VLAN: <code>1<\/code><\/p>\n<h4>Step 2: Inspect Local Trunk Status<\/h4>\n<p>Run <code>show interfaces trunk<\/code> on the local switch to confirm the active native VLAN on the reporting interface:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces trunk\nPort        Mode             Encapsulation  Status        Native vlan\nGi0\/1       on               802.1q         trunking      999\n<\/code><\/pre>\n<h4>Step 3: Interrogate the Remote Neighbor via CDP<\/h4>\n<p>Run <code>show cdp neighbors &lt;interface&gt; detail<\/code> to retrieve the remote switch&#8217;s identity and management address without leaving your current console session:<\/p>\n<pre><code class=\"language-text\">Switch# show cdp neighbors GigabitEthernet0\/1 detail\n-------------------------\nDevice ID: Switch-B\nEntry address(es):\n  IP address: 10.10.10.3\nPlatform: cisco WS-C3560CX-8PC-S,  Capabilities: Switch IGMP\nInterface: GigabitEthernet0\/1,  Port ID (outgoing port): GigabitEthernet0\/1\nNative VLAN: 1\n<\/code><\/pre>\n<h4>Step 4: Correct the Configuration Discrepancy<\/h4>\n<p>Log into the remote device (<code>Switch-B<\/code>) and align the native VLAN configuration on its connecting interface:<\/p>\n<pre><code class=\"language-text\">Switch-B# configure terminal\nSwitch-B(config)# interface GigabitEthernet0\/1\nSwitch-B(config-if)# switchport trunk native vlan 999\nSwitch-B(config-if)# end\n<\/code><\/pre>\n<h4>Step 5: Check Spanning Tree for Self-Healing<\/h4>\n<p>When a native VLAN mismatch occurs, Cisco Spanning Tree Protocol (PVST+) places the affected ports into a <code>Bkp-B<\/code> (Backup \/ Inconsistent) state to prevent forwarding loops. Once both native VLAN IDs match, verify that STP has unblocked the port:<\/p>\n<pre><code class=\"language-text\">Switch# show spanning-tree inconsistentports\nNo inconsistent interfaces exist in the system.\n<\/code><\/pre>\n<p>The <code>%CDP-4-NATIVE_VLAN_MISMATCH<\/code> syslog alerts will immediately cease.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_IOSIOS-XE_Command_Reference_and_Implementation_Standards\"><\/span>Cisco IOS\/IOS-XE Command Reference and Implementation Standards<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Official Cisco IOS and IOS-XE command structures for managing VLANs adhere to the IEEE 802.1Q standard. The following reference outlines the exact syntax parameters, ranges, and operational scopes used in enterprise Catalyst architectures.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Command_Syntax_Reference\"><\/span>Command Syntax Reference<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<h4><code>switchport trunk native vlan<\/code><\/h4>\n<ul>\n<li><strong>Syntax:<\/strong> <code>switchport trunk native vlan {vlan-id}<\/code><\/li>\n<li><strong>Mode:<\/strong> Interface Configuration Mode (<code>config-if<\/code>)<\/li>\n<li><strong>Default:<\/strong> <code>vlan-id 1<\/code><\/li>\n<li><strong>Range:<\/strong> <code>1<\/code> to <code>4094<\/code> (Standard range: 1\u20131005; Extended range: 1006\u20134094).<\/li>\n<li><strong>Function:<\/strong> Specifies the VLAN that handles untagged traffic on an IEEE 802.1Q trunk port. All untagged frames entering the port are placed in this VLAN; all frames leaving the port in this VLAN are sent untagged.<\/li>\n<\/ul>\n<h4><code>vlan dot1q tag native<\/code><\/h4>\n<ul>\n<li><strong>Syntax:<\/strong> <code>vlan dot1q tag native<\/code><\/li>\n<li><strong>Mode:<\/strong> Global Configuration Mode (<code>config<\/code>)<\/li>\n<li><strong>Default:<\/strong> Disabled (native VLAN frames transmit without an 802.1Q tag).<\/li>\n<li><strong>Function:<\/strong> Globally forces the switch to append an 802.1Q header with the native VLAN ID to native traffic on all trunk ports. This nullifies double-tagging VLAN-hopping exploits across the switching fabric.<\/li>\n<\/ul>\n<h4><code>switchport trunk allowed vlan<\/code><\/h4>\n<ul>\n<li><strong>Syntax:<\/strong> <code>switchport trunk allowed vlan {all | none | [add | remove | except] vlan-list}<\/code><\/li>\n<li><strong>Mode:<\/strong> Interface Configuration Mode (<code>config-if<\/code>)<\/li>\n<li><strong>Default:<\/strong> <code>all<\/code> (VLANs 1\u20134094).<\/li>\n<li><strong>Function:<\/strong> Restricts which VLAN frames are permitted to transmit across the trunk interface. Using the <code>remove 1<\/code> parameter prevents factory default VLAN data from passing between switches.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"IEEE_8021Q_Standards_Alignment\"><\/span>IEEE 802.1Q Standards Alignment<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Under IEEE 802.1Q, native VLAN support allows a trunk port to interface with an access device (or a non-VLAN-aware hub) by sending frames without an explicit 4-byte 802.1Q tag header. Cisco switches strictly comply with this standard, with the caveat that internal Cisco proprietary control packets (such as CDP, VTP, and UDLD) maintain specialized tagging behaviors even when the native VLAN parameter is shifted away from VLAN 1.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Securing default VLAN architecture on Cisco Catalyst switches requires a multi-plane approach. Because Cisco IOS hardcodes VLAN 1 into its control plane architecture, you cannot delete or rename it. Instead, isolate and harden each Layer 2 and Layer 3 boundary independently:<\/p>\n<ol>\n<li><strong>Data Plane (Trunk Links):<\/strong> Use <code>switchport trunk native vlan<\/code> to map untagged frames to an unused dummy VLAN (e.g., VLAN 999), and tag native traffic globally using <code>vlan dot1q tag native<\/code>.<\/li>\n<li><strong>Management Plane (SVI):<\/strong> Migrate administrative IP addresses off <code>interface Vlan1<\/code> to a dedicated, routed management VLAN (e.g., VLAN 10), then shut down SVI 1.<\/li>\n<li><strong>Access Plane (User Edge):<\/strong> Assign all unused switch interfaces to a non-routable quarantine VLAN in a shutdown state to maintain a hardened Layer 2 posture across your enterprise fabric.<\/li>\n<\/ol>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-change-default-vlan-on-cisco-switch_24479.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Change+Default+VLAN+on+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\",\"How to Change Default VLAN on Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>When network administrators discuss changing the &#8220;default VLAN&#8221; on a Cisco switch, they are usually referring to one of three distinct concepts: changing the untagged 802.1Q native VLAN on trunk links, migrating the switch management virtual interface (SVI) away from VLAN 1, or reassigning default access ports. In factory-default Cisco configurations, VLAN 1 simultaneously serves&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Change Default VLAN on Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Change Default VLAN on Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"When network administrators discuss changing the &#8220;default VLAN&#8221; on a Cisco switch, they are usually referring to one of three distinct concepts: changing the untagged 802.1Q native VLAN on trunk links, migrating the switch management virtual interface (SVI) away from VLAN 1, or reassigning default access ports. In factory-default Cisco configurations, VLAN 1 simultaneously serves... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T02:38:22+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"12 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\",\"name\":\"How to Change Default VLAN on Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-16T02:38:22+00:00\",\"dateModified\":\"2026-11-16T02:38:22+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Change Default VLAN on Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Change Default VLAN on Cisco Switch\",\"datePublished\":\"2026-11-16T02:38:22+00:00\",\"dateModified\":\"2026-11-16T02:38:22+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#webpage\"},\"wordCount\":1885,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Change Default VLAN on Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html","og_locale":"en_US","og_type":"article","og_title":"How to Change Default VLAN on Cisco Switch - SPOTO Official Blog","og_description":"When network administrators discuss changing the &#8220;default VLAN&#8221; on a Cisco switch, they are usually referring to one of three distinct concepts: changing the untagged 802.1Q native VLAN on trunk links, migrating the switch management virtual interface (SVI) away from VLAN 1, or reassigning default access ports. In factory-default Cisco configurations, VLAN 1 simultaneously serves... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-16T02:38:22+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"12 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html","name":"How to Change Default VLAN on Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-16T02:38:22+00:00","dateModified":"2026-11-16T02:38:22+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Change Default VLAN on Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Change Default VLAN on Cisco Switch","datePublished":"2026-11-16T02:38:22+00:00","dateModified":"2026-11-16T02:38:22+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#webpage"},"wordCount":1885,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-change-default-vlan-on-cisco-switch_24479.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24479"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24479"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24479\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24479"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24479"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24479"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}